The Gravity XSP 1092 is a set of 12 rubber anti-slip stoppers that serve as spare parts for the Gravity LTS 01 laptop stand.
The Gravity XSP 10014 is a set of four rubber holders that allow you to put the weight plate for the Gravity WB 123 base plate in place. These are four spare parts.
The Gravity XSP 1082 T-Bar is a spare part for the Gravity LS TBTV 17 light stand. This T-Bar has a length of 95 centimetres and is made of sturdy steel.
The Gravity XSP 1090 is a set of end caps and screws for the Gravity LTS 01 laptop stand. These are two plastic caps against which the laptop leans, including screws for fastening.
For the Gravity LS TBTV 28 light stand, the Gravity XSP 10011 is a spare part. This is the complete, upper clamp set including set screw, screws, washer and safety pin.
The Gravity XSP 10012 provides you with the lower clamp set for the Gravity LS TBTV 28 tripod. This clamp set serves as a spare parts set and consists of a clamp, set screw, screws, washer and safety pin.
The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
With the Gravity XSP 1027S, you have a complete kit consisting of spare parts that allow you to adjust the height of a Gravity keyboard stand.
The Gravity XSP 1068 is a set screw with 3/8-inch thread, suitable for mounting a microphone or microphone accessories. This is a spare part for the Grazvity MA MH 01.
The Gravity XSP 1031 Replacement Tensioning Screw is needed to mount the height adjustment lever of your Gravity MS 4321 microphone stand. Also compatible with similar Gravity mic stands.
With the Gravity XSP 1370, you have the wind-up mechanism complete with housing, suitable for Gravity SP 4722 or similar speaker stands. This is a spare part.
The Gravity XSP 1094 spare part consists of two rubber feet for the Gravity LTS 01 laptop stand. These feet fit on the ends of the stand and prevent the stand from shifting.
The Gravity XSP 1095 provides you with the lever element, including screws, for the Gravity LTS 01 laptop stand. This is a spare part that appears twice in the LTS 01 main product.
The Gravity XSP 1372 concerns the central connecting ring for the tripod bracket rods for the Gravity SP 4722 and similar speaker stands. This is a spare part and does not include a screw set.
The Gravity XSP 1011 is a single rubber foot fitted with a replaceable green coloured ring. This is a spare part for Gravity microphone stands equipped with a tripod base.
The Gravity XSP 1024 is a set of 4 plugs that allow you to plug shut the support tubes of a Gravity keyboard stand. The XSP 1024 is compatible with 28-millimetre diameter tubes.
The Gravity XSP 1013S is a spare part for Gravity swing-arm microphone stands. It is a 1-point adjustable hub into which a swivel arm can be attached.
The Gravity XSP 1015 replaces the worn or broken collar of your Gravity speaker tripod. This collar concerns the coupling piece between the tripod's legs and the tripod.
Compatible with any Gravity microphone stand fitted with a boom arm, the replacement Gravity XSP 1014S Swivel Arm Hub has a two-point adjustment system so both the angle and length of the boom arm can be accurately set up.
The Gravity XSP 1012 is a rod arm swivel head spare part. Combined with the XSP 1014S rod arm hub, the XSP 1012 allows you to mount a rod arm on a Gravity microphone stand.
The Gravity XSP 1009 clutch handle is a replacement part for Gravity-made microphone stands.
The Gravity XSP 1010 replacement boom arm counterweight is compatible with various Gravity-designed boom arm microphone stands.
Use the Gravity XSP 1363 to replace a lost or worn rubber base on your Gravity speaker stand, such as the Gravity SP 4722. This is a rubber base including a green coloured ring.
The Gravity XSP 1365 is a set consisting of three screws, nuts and washers for mounting the Gravity speaker stand base. This is a spare part for the Gravity SP 4722, among others.
The Gravity XSP 1364 is a set of two bracket rods including screws. This set serves as a spare part for Gravity tripod speaker stands such as the SP 4722.
The Gravity XSP 1044 is a plastic inlay that serves as a spare part for the microphone clutch of the Gravity MS 4321 and similar microphone stands.
The Gravity XSP 1362 is a spare part for the wind-up Gravity speaker stand. It is the 35 mm adapter sleeve on which you mount the speaker.
The Gravity XSP 1366 speaker stand base is a spare part for Gravity tripod speaker stands, such as the SP 4722. This is the base part, excluding screws and legs.
The Gravity LS TBTV 17 lighting stand comes outfitted with a T-bar, a tripod base and super-strong steel tubes.
Securely mount a speaker using the Gravity SP 2342 B distance rod and set it up at the optimum height.
The Gravity XSP 10001 is a spare part for Gravity microphone stands. It is the main bushing including clutch for the MS 231 and similar models.
The Gravity XSP 1078 is a set of two end caps you can use to seal the ends of the Gravity LS TB 01 universal T-Bar. These caps come with green rings included.
The Gravity XSP 10007 is a spare part for the Gravity LS TBTV 17 light stand. It is the upper clamping element of the tripod, complete with screws, set screw and washer.
The Gravity XSP 10006 is a short set screw that serves as a spare part for, among others, the Gravity LS TBTV 17 light stand. This set screw has a rubber anti-slip coating.
The Gravity XSP 1084 Spare Screw Pack includes four replacement screws, washers and wing nuts that are compatible with Gravity T-Bars like the LS TBTV 17.
With the Gravity XSP 1081, you are provided with a clamp that serves as a spare for the Gravity NS 411 sheet music stand, or for the Gravity LS TBTV 17 light stand.
The Gravity XSP 10009 is a medium adjustment screw suitable for the tripod base kit of the Gravity LS TBTV 17 light stand. This is a spare part supplied as standard with the main product.
The Gravity XSP 1080 refers to a set of spare parts that make up the support joint that couples the music sheet to the stand. This set comes complete with set screws, washers and other parts.
The Gravity XSP 1358 is a set of two protective tubes for Gravity guitar stands, especially the GS 01 and similar models. You attach these tubes to the legs on which the guitar leans.
The Gravity XSP 1201 is a screw set that serves as a spare part of a Gravity NS ORC music stand. With this kit, you attach the blade mounting plates to the tripod.
From the Gravity GS 01 NHB, this XSP-1360 spare part concerns the guitar clamp for the guitar stand.
If the rubber base of a Gravity speaker stand is worn out or lost, you can replace it with the Gravity XSP 1020. This foot features a coloured ring.
The Gravity XSP 1016S Replacement Clamp Set is compatible with various Gravity-designed speaker stands and includes the clamps needed to adjust the height of your stand.
The Gravity XSP 1017S is a spare part for a Gravity speaker stand, specifically a speaker leg brace set complete with bolt, nut and washer so you can easily replace a broken support.
With the Gravity XSP 1018, you have a spare part for Gravity speaker stands. The XSP 1080 concerns a plug that allows you to cover the tube of the stand.
The Gravity XSP 1058 is a set screw including plastic tip, suitable for Gravity headphone holders or microphone stand adapters. The knob on the screw is fitted with a green, replaceable washer.
The Gravity XSP 1072 concerns the base of a Gravity Vari-Poly tripod. It is a spare part. The foot has a diameter of 85 millimetres.
The Gravity XSP 1071 concerns the locking mechanism for the Gravity LS Vari-Pole. It is a spare part for this tripod.
