With the Gravity XSP 1027S, you have a complete kit consisting of spare parts that allow you to adjust the height of a Gravity keyboard stand.
The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
The Gravity XSP 1092 is a set of 12 rubber anti-slip stoppers that serve as spare parts for the Gravity LTS 01 laptop stand.
The Gravity XSP 1094 spare part consists of two rubber feet for the Gravity LTS 01 laptop stand. These feet fit on the ends of the stand and prevent the stand from shifting.
The Gravity XSP 1095 provides you with the lever element, including screws, for the Gravity LTS 01 laptop stand. This is a spare part that appears twice in the LTS 01 main product.
The Gravity XSP 10014 is a set of four rubber holders that allow you to put the weight plate for the Gravity WB 123 base plate in place. These are four spare parts.
The Gravity XSP 10006 is a short set screw that serves as a spare part for, among others, the Gravity LS TBTV 17 light stand. This set screw has a rubber anti-slip coating.
The Gravity XSP 10007 is a spare part for the Gravity LS TBTV 17 light stand. It is the upper clamping element of the tripod, complete with screws, set screw and washer.
For the Gravity LS TBTV 28 light stand, the Gravity XSP 10011 is a spare part. This is the complete, upper clamp set including set screw, screws, washer and safety pin.
The Gravity XSP 1082 T-Bar is a spare part for the Gravity LS TBTV 17 light stand. This T-Bar has a length of 95 centimetres and is made of sturdy steel.
The Gravity XSP 1083 T-Bar is a spare part for the Gravity LS TBTV 28 light stand. This T-Bar has a length of 122 centimetres and is made of sturdy steel.
The Gravity XSP 1090 is a set of end caps and screws for the Gravity LTS 01 laptop stand. These are two plastic caps against which the laptop leans, including screws for fastening.
The Gravity XSP 10015 replacement feet are compatible with the Gravity WB 431 baseplate. This is a set of 4.
The Gravity XSP 10001 is a spare part for Gravity microphone stands. It is the main bushing including clutch for the MS 231 and similar models.
The Gravity XSP 10013 is a short set screw that serves as a spare part of the Gravity NS 411 and similar classical music stands. This set screw has M6 x 17 mm threads and a comfortable knob.
The Gravity XSP 1080 refers to a set of spare parts that make up the support joint that couples the music sheet to the stand. This set comes complete with set screws, washers and other parts.
With the Gravity XSP 1081, you are provided with a clamp that serves as a spare for the Gravity NS 411 sheet music stand, or for the Gravity LS TBTV 17 light stand.
The Gravity WB 431 B is a base plate onto which you can mount up to 3 M20 tripods or intermediate poles. This is a wide, steel, stable mounting plate with a low profile and fabric-covered legs.
The Gravity XSP 10008 provides you with a tripod base kit for attaching tripod parts to the main tube of the Gravity LS TBTV light stand.
The Gravity XSP 10009 is a medium adjustment screw suitable for the tripod base kit of the Gravity LS TBTV 17 light stand. This is a spare part supplied as standard with the main product.
The Gravity XSP 1078 is a set of two end caps you can use to seal the ends of the Gravity LS TB 01 universal T-Bar. These caps come with green rings included.
The Gravity XSP 1079 is a clamp that allows you to mount the Gravity LS TB 01 T-Bar to a standard 35 mm wide speaker stand. This is a spare part that comes standard with the main product.
The Gravity XSP 1002 is a spare part for Gravity microphone stands. The XSP 1002 is a microphone clamp and boom holder with a diameter of 12 millimetres.
The Gravity XSP 1023S spare hardware pack includes the bolts, nuts and washers needed to secure a Gravity speaker stand.
The Gravity XSP 1018L is a longer version of the XSP 1018: a cover/plug that serves as a spare part of Gravity speaker stands. It allows you to cover the tube of the stand.
The Gravity XSP 1019 is a spare part for Gravity speaker stand adapters, such as the SA FIXTILT 5. It is a plug/cover that you can place on the tube of the adapter.
The Gravity XSP 1034 is an adjustment screw set complete with extra-large knob and a replaceable, green-coloured ring. This Gravity XSP 1034 adjusting screw set serves as a spare part for Gravity speaker stands.
The Gravity XSP 1040 refers to an M10 wing nut. This nut serves as a spare part of Gravity speaker stand adapters, among others.
The Gravity XSP 1041 M10 bolt and washer serve as a spare part for Gravity tripods.
The Gravity XSP 1202 concerns the connection point between the main tube and the plate of the Gravity NS ORC sheet music stands. This is a set of spare parts suitable for these stands.
With a set of Gravity KS Varifoot's attached to your (Gravity) keyboard stand, you prevent the stand from wobbling on uneven surfaces. Each Varifoot is suitable for 28 mm thick tubes and compensates up to a centimetre in height.
The Gravity XSP 10010 is a set screw complete with plastic head and bright green coloured washer, suitable for adjusting the Gravity LS TBTV 28 T-Bar. This is a spare part.
Filters