Ibanez TWP10 Twin Peaks Wah Pedal

General

Ibanez presents the TWP10 Twin Peaks: a wah pedal like no other since. While most wah pedals feature a single peak, the Twin Peaks literally features a two-peak filter that effects both the higher register and the lower register - all thanks to the dual internal inductor circuits. Via the Balance pot on the side, the peaks can be blended and the of higher and lower frequency resonance can be adjusted to customise the output.

The Ibanez TWP10 Twin Peaks: Double it Up!

The Tone mode switch sets where the sweep emphasis lies. Set it to High, and the trebles range from 670Hz to 3kHz and the basses range between 300Hz and 1kHz. Set to Low, and the trebles swing between 440Hz and 2kHz while the basses sweep from 220Hz to 750Hz. Then, tweak the Master Level pot to accurately set the effect volume, balancing it with your dry sound, or pushing it up by a good +6 decibels. Basically, if you want even more out of your wah, the Ibanez TWP10 Twin Peaks is going to give it. Run this pedal via a single 9 Volt battery or a standard 9 Volt power supply.

Tips or comments about this product

• Please note: A power supply does not come included with this pedal.