Based on more than 21,240 customer reviews

Sennheiser EW 352 G3 (Band B, 626-668MHz) promo pack

no reviews yet

Discontinued, this product can no longer be ordered.

No alternatives found
Not sure if the Sennheiser EW 352 G3 (Band B, 626-668MHz) promo pack is for you? Do a Choice Check. Start Choice Checker
Sennheiser EW 352 G3 (Band B, 626-668MHz) promo pack
Product no: 9000-0014-5752

Product information

General

This Sennheiser EW 352 G3 promo bundle consists of four wireless headset microphone sets and comes with a free ASA 1 antenna splitter and NT 1-1 power adapter. The headset microphone gives you a lot of mobility during your presentations or sport instruction. It is a perfect set for large sport schools and conference centres. By connecting the four separate receivers to the antenna splitter, you can use two antennas. Moreover, the receivers are powered by the ASA 1, so that you need only use one NT 1-1 adapter.

EW 352 G3 headset wireless

The EW 352 G3 is a light and comfortable microphone. These properties ensure that the user has absolute mobility on stage, for a more animated and expressive show. The high-quality condenser technology delivers a brilliantly clear sound. All rack-mountable G3 300-series receivers are equipped with an Ethernet port. This means that you can control the system from a PC, with Sennheiser's "Wireless Systems Manager" software.

Sennheiser's G3 series is the successor to the well-known G2 series. This new series of wireless systems distinguishes itself from its predecessor with its extensive range of new options. All devices out of the G3 series have a built-in equalizer, IR synchronisation, battery status and new 19-inch rack mounts.

Please note that this is the B version! The only difference compared to the A version is its frequency range of 626 to 668 MHz, which is most commonly used in the Netherlands. Although both versions are functional, we recommend that you choose the A version for use in Belgium and the B version for use in the Netherlands. It is not possible to combine the A and the B version!

Sennheiser ASA 1 active antenna splitter and NT 1-1 power supply

The Sennheiser ASA 1 is an active antenna splitter, which allows you to connect multiple EW receivers to a single UHF antenna. It lets you split a signal without any signal loss, in a 2 x 1:4 or 1 x 1:8 matrix. Connected EW G3 receivers an (separately available) antenna boosters are powered via the BNC cable from the ASA1, so that you won't need an individual power supply for every device. An NT 1-1 AC adapter powers the Sennheiser ASA 1.

Sennheiser EW 352 G3-B-EU (Band B: 626-668MHz) headset microphone This product comes with a 3-year warranty.

Sennheiser ASA 1 active antenna splitter This product comes with a 3-year warranty.

Sennheiser NT1-1 power supply This product comes with a 3-year warranty.

Specifications

Sennheiser EW 352 G3-B-EU (Band B: 626-668MHz) headset microphone
4x Sennheiser EW 352 G3-B-EU (Band B: 626-668MHz) headset microphone
The EW 352 G3 is a light and comfortable microphone. These properties ensure that the user has absolute mobility on stage, for a more animated and expressive show.

Product features

Battery type
AA
Battery life (approx.)
8 hours
Frequency band
Sennheiser ew G4 B (626 - 668 MHz)
Includes headset
Yes
Channel
40 (622 - 630 MHz), 41 (630 - 638 MHz), 42 (638 - 646 MHz), 43 (646 - 654 MHz), 44 (654 - 662 MHz), 45 (662 - 670 MHz)
Maximum frequency
18 - 18.9 kHz
Minimum frequency
80 - 99 Hz
Polar pattern
Super cardioid
Switchable frequencies
Yes
Type of frequency band
600 - 699 MHz
Transmission power
10 mW + 30 mW

Weight and dimensions including packaging

Weight
3,0 kg
Dimensions
45,2 x 37,4 x 7,4 cm

Product specifications

  • rugged metal housing
  • 42 MHz bandwidth: 1,680 adjustable UHF frequencies for interference-free reception
  • improved frequency bank system with up to 24 compatible frequencies
  • Ethernet port for connecting to Wireless Systems Manager (WSM) software for control via computer - this ensures a good overview of monitoring and professional data management for multi-channel systems
  • high-quality true diversity reception
  • 'pilot tone squelch’ for elimination of RF interference when the transmitter is turned off
  • automatic frequency scan finds available frequencies
  • enhanced AF frequency range
  • increased range for audio sensitivity
  • wireless synchronisation of transmitter parameter from receiver
  • user-friendly menu operation with more control options
  • backlit graphic display, receiver also shows transmitter settings
  • auto-lock function prevents accidental alterations in settings
  • HDX compander for crystal-clear sound
  • transmitter features battery indication in 4 steps, also shown on the receiver display
  • programmable mute function
  • integrated equalizer and sound-check mode
  • contacts for charging the BA 2015 battery pack directly in the transmitter
  • RF frequency range 626 to 668 MHz
  • 1,680 transmitting/reception frequencies
  • 24 presets
  • switching bandwidth: 42 MHz
  • frequency response: 80 to 18,000 Hz
  • signal/noise ratio over 115 dB (A)
  • THD less than 0.9 %
  • in accordance with ETS 300422, ETS 300445, CE, FCC
  • 2BNC, 50-Ohm antenna connector
  • 6.3mm jack audio connector
  • audio output level: XLR balanced +18 dBu maximum; jack unbalanced +12 dBu maximum
  • RF output power 10 / 30 mW
  • battery life transmitter: over 8 hours
  • input voltage range 1,8 V / 2,4 V line
  • electret transducer
  • AF sensitivity: 1.6 mV/Pa
  • sound pressure 150 dB (SPL) maximum
  • super-cardioid pickup pattern
  • dimensions receiver: 212 x 202 x 43 mm
  • dimensions transmitter: 82 x 64 x 24 mm
  • weight receiver: 980 gr
  • weight transmitter: 160 grams
Sennheiser ASA 1 active antenna splitter
1x Sennheiser ASA 1 active antenna splitter
The Sennheiser ASA 1 is an active antenna splitter that allows you to connect several EW receivers to a single UHF antenna. With the ASA 1 you can split a signal without suffering any signal loss.

Product features

Active or passive
Active
Polar pattern
Not applicable
Dispersion angle
Not applicable
Antenna type / accessory
Splitter / combiner
Data plug type
BNC
Type of frequency band
500 - 599 MHz, 600 - 699 MHz, 700 - 799 MHz, 800 - 899 MHz

Weight and dimensions including packaging

Weight
1,9 kg
Dimensions
25,0 x 22,0 x 8,3 cm

Product specifications

- active antenna splitter
- switchable between 2 x 1:4 or 1x 1:8
- frequency range: 500-870 MHz
- amplification factor: 0 dB ± 1 dB
- impedance: 50 Ohm
- power supply: 13.8 V DC (via optional Sennheiser NT 1-1 power adapter)
- total power consumption: 2 A (with 4 connected transmitters and 2 boosters)
- power supply voltage to antenna boosters (ANT RF IN A and B) 12 V / 130 mA
- power supply voltage to receivers: 12 V / 350 mA
- operating temperature: -10 °C to 55 °C
- storage temperature: -20 ° C to +70 ° C
- including 8 antenna cables (length 50 cm, BNC connector)
- dimensions: approx. 212 x 168 x 43 mm
- weight: 1,090 grams

Sennheiser NT1-1 power supply
1x Sennheiser NT1-1 power supply
The Sennheiser NT1-1 is a power supply for a single L 2015 charger or ASA1 antenna splitter, for instance.

Product features

Sustainable product
Not specified
Type of charger & docking station
Power / adapter
Type of power adapter
Specific

Weight and dimensions including packaging

Weight
300 gr
Dimensions
16,4 x 8,0 x 7,3 cm

Product specifications

  • power supply
  • compatible with:
    • ASA 1
    • ASP 2
    • EM 100 / 300 / 500 G2
    • SR 300 G2
    • EM 100 G3
    • EM 300/500 G3
    • SR 300 G3
    • L 2015
  • European plug
A review can no longer be written about this item

There are no reviews for this product yet.

Other products from Sennheiser

Find all products of the brand Sennheiser
Compare your gear (1/10)