▾

Audiophony PREZONE642 10-Channel, 2-Zone Preamp/Mixer

no reviews yet write a review

Recommended price £432 -23%

£333 incl. 20% VAT

General

Via ten channels and two zones, the Audiophony PREZONE642 mixer supplies plenty of setup options. This rack unit comes loaded with six microphone inputs and four line inputs that can routed to a specific zone or both zones at once. Each zone also features extra SUB output with dedicated volume controls and an extra insert that can either support external effect units or added protection. An equalizer and output level display has been fitted to help dial in each zone and, via the headphone port on the front panel and the Phone button, the signal can be monitored per zone before being sent out.

Clean Design

The clean design and layout of the Audiophony PREZONE642 mixer keeps things smooth and easy to work with and, since it's so compact, the whole thing can be neatly mounted in a 19 inch rack where it takes up just two units of space. Once connected up, a priority switch can be flipped between channels 1 and 2, ducking the volume of non-priority channels to support announcements, while a set of Peak indicators aid signal level monitoring and a set of Clip LEDs light up for each channel when the signal gets too high. In case of a power outage, this mixer even comes equipped with a 24 Volt backup power supply.

Specifications

Product features

Sustainable product	not specified
Rack height	2 U
Number of microphone channels	6
Number of link channels	4
Number of auxiliaries	0
Number of submasters	2
Equalizer	3-band
Compressor on the inputs	no
Audio ducking	no
Built-in effects	no
Built-in audio player	no
Headphone output	yes
Volume control	faders
Fader start support	no
Crossfader	no
Input level meters	no
Level meters on the outputs	LED VU meter
Input	jack (6.3 mm) + XLR + RCA
Output connector	jack (6.3 mm) + XLR + RCA, Euroblock

Weight and dimensions including packaging

Weight (incl. packaging)	6,5 kg
Dimensions (incl. packaging)	50,0 x 40,0 x 10,0 cm

Product specifications

mixer
x2 zones
x6 mono microphone/line inputs via XLR/mono 6.3mm jacks
phantom power and talk-over on channels 1 and 2
x4 stereo inputs via RCA or jack
priority input via 6.35mm jack
zone 1 and 2 balanced mono XLR outputs
zone inserts via 6.3mm TRS jack ports
balanced SUB output per zone via 6.3mm jack
RCA stereo output
microphone input gain and 3-band EQ controls
gain control on all inputs
2-band tone controls per zone
SUB volume control per zone
a screwdriver is required for access to technical settings
zone assignment and PFL on every channel strip
signal and peak LED indicators
output level indicator for each zone via 8-LED VU meter
headphone output with volume control (zones and PFL)
power supply: 230V, 50/60 Hz
power consumption: 16W
back-up power supply: DC 24V with Link Out
frequency range: 20Hz - 20kHz (+/- 3dB)
THD (1 kHz nominal power): <0.2%
equalizer:
- treble: +/- 12dB @ 12.5kHz
- mid: +/- 12dB @ 2,5kHz
- bass: ± 12 dB at 80Hz
dimensions: 295 x 85 x 482mm
19"rack mountable: height 2U
weight: 5 kg