Based on more than 21,240 customer reviews

DAP Palladium P-400 Black Series PA amplifier

no reviews yet
DAP Palladium P-400 Black Series PA amplifier

Discontinued

This product can no longer be ordered

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
Yes
Input
Jack (6.3 mm), XLR
Built-in filter
None
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, clip indicator
Built-in DSP processor
No
Cooling
Ventilator
RMS power (4 ohms) per channel
200 - 249 watts
RMS power (at 8 Ohms) per channel
150 - 199 Watts
Amplifier class
AB
Amplifier output
Locking speaker connector, wire clamps
Equipped with crossover
No

Weight and dimensions including packaging

Weight
15,4 kg
Dimensions
60,0 x 60,0 x 20,0 cm

Product specifications

  • powerful stereo PA amplifier
  • colour: black
  • affordable and reliable
  • XLR and jack inputs
  • lockable speaker connectors and wire-clamp outputs
  • stereo mode: 2x 100W RMS at 8 ohms, 2x 200W RMS at 4 ohms
  • bridged mode: 400 watts RMS at 8 ohms
  • frequency range: 20 Hz to 20 kHz: +0.1 / -3 dB (1W / 8 ohms)
  • THD (4 ohms), 1 kHz < 0.05% at 200 watts
  • SMPER IMD < 0.01% at 100 watts (60 Hz and 7 kHz)
  • slew rate > 40V/ µS
  • damping factor: 300:1.1 kHz at 8 ohms
  • input CMRR (1 kHz) > 60 dB
  • voltage gain: 50 x standard
  • input sensitivity (8 ohms): 0.775V with average use
  • input impedance: 20 kOhm balanced, 10 kOhm unbalanced
  • noise: -103 dB
  • crosstalk < 60 dB
  • inputs per channel: 1x XLR female (pin 2 +), 1x TRS jack (tip +)
  • outputs per channel: 1x SpeakOn, 2x wire clamp (+ and -)
  • power supply: 230 volts / 50~ 60 Hz
  • maximum power consumption at 220 V: 5 A
  • cooling: two DC fans with variable speed
  • controls: front 2x volume control, read ground lift jumper
  • LED indicators per channel, protect, clip, signal, power
  • security: temperature, short-circuiting, DC voltage, subsonic, high frequency, on/off
  • dimensions: 483 x 400 x 89 mm (LxWxH)
  • weight: 18 kg

No alternatives found

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
Yes
Input
Jack (6.3 mm), XLR
Built-in filter
None
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, clip indicator
Built-in DSP processor
No
Cooling
Ventilator
RMS power (4 ohms) per channel
200 - 249 watts
RMS power (at 8 Ohms) per channel
150 - 199 Watts
Amplifier class
AB
Amplifier output
Locking speaker connector, wire clamps
Equipped with crossover
No

Weight and dimensions including packaging

Weight
15,4 kg
Dimensions
60,0 x 60,0 x 20,0 cm

Product specifications

  • powerful stereo PA amplifier
  • colour: black
  • affordable and reliable
  • XLR and jack inputs
  • lockable speaker connectors and wire-clamp outputs
  • stereo mode: 2x 100W RMS at 8 ohms, 2x 200W RMS at 4 ohms
  • bridged mode: 400 watts RMS at 8 ohms
  • frequency range: 20 Hz to 20 kHz: +0.1 / -3 dB (1W / 8 ohms)
  • THD (4 ohms), 1 kHz < 0.05% at 200 watts
  • SMPER IMD < 0.01% at 100 watts (60 Hz and 7 kHz)
  • slew rate > 40V/ µS
  • damping factor: 300:1.1 kHz at 8 ohms
  • input CMRR (1 kHz) > 60 dB
  • voltage gain: 50 x standard
  • input sensitivity (8 ohms): 0.775V with average use
  • input impedance: 20 kOhm balanced, 10 kOhm unbalanced
  • noise: -103 dB
  • crosstalk < 60 dB
  • inputs per channel: 1x XLR female (pin 2 +), 1x TRS jack (tip +)
  • outputs per channel: 1x SpeakOn, 2x wire clamp (+ and -)
  • power supply: 230 volts / 50~ 60 Hz
  • maximum power consumption at 220 V: 5 A
  • cooling: two DC fans with variable speed
  • controls: front 2x volume control, read ground lift jumper
  • LED indicators per channel, protect, clip, signal, power
  • security: temperature, short-circuiting, DC voltage, subsonic, high frequency, on/off
  • dimensions: 483 x 400 x 89 mm (LxWxH)
  • weight: 18 kg
bax-shop.uk | B-stock

Product information

Product no: 9000-0004-1130

General

After having sold over 50,000 Palladium amplifiers, DAP Audio decided that it was high time to give this series a facelift. The result is the Black Series Palladium. This P-400 stereo PA amplifier is the smallest unit in the series when it comes to power. It has the same specifications as its vintage silver brother, but is black. The P-400 delivers 2x 100 watts of stereo power at 8 ohms and 2x 200 watts at 4 ohms. In bridged mode, if even offers 400 watts of power! This is more than enough for small fixed or mobile audio installations.

Characteristics of the DAP P-400 Black Series

All of this power needs to be managed in a reliable and safe way, of course. Which is why the P-400 amplifier is equipped with security mechanisms against, for instance, short-circuiting and overheating. When it comes to connectors, this unit is also highly complete. It has an XLR as well as TRS jack input per channel. For outputs, the P-400 lets you choose between high-quality lockable speaker connectors or the more traditional wire clamps. This way, you can easily connect nearly any speaker and other sound source.

The proven quality of the Palladium amplifier

Who is not familiar with the DAP Audio Palladium series? Many have grown up around them, many have started their musical career with them and are still working with them. Just like the silver-coloured Vintage Series, the Palladium Black Series consists of seven amplifiers, varying in power from 400 watts to a whopping 2,000 watts! They all have one thing in common: proven quality and an extremely attractive price.

Bax Music Warranty This product comes with a 3-year warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Other products from DAP

Find all products of the brand DAP

Alternative products by other brands

Search all products in category Amplifiers

Related products from DAP

Find all products from the brand DAP in the category Amplifiers
Compare your gear (1/10)
Clear Compare