Based on more than 21,240 customer reviews

Behringer NX6000D Amplifier with DSP Processor

no reviews yet

Discontinued, this product can no longer be ordered.

Alternative items
Behringer NX6000D Amplifier with DSP Processor
Product no: 9000-0046-0390 Bax Music Warranty: This product comes with a 3-year warranty when you register it with Behringer within 90 days of purchase. If the product is not registered it has a 2-year warranty.

General

The Behringer NX6000D is a lightweight, class-D amplifier with two-channels and a massive 1,600 Watt power capacity at 8 Ohms. It's packed with modern technology such as Zero-Attack limiters and a DSP. The limiters keep a watchful eye on the operating temperatures and make sure the device doesn't overheat, even at maximum output, while SmartSense flattens out the frequency range at any level of impedance. The amplifier offers three user modes: mono, stereo and bridged. When set to bridge mode and combined with a 4-Ohm input, this amp puts 6,000 Watts at your disposal. There's an extensive DSP section on-board with a delay, crossover and 8-band parametric EQ and you can use the USB port and Behringer's NX Edit software to adjust, operate or monitor the NX6000D and create your own presets.

Specifications

Product features

19-inch rack size 2U
2-ohm compatible no
Number of amplifier channels 2
Audio loop output no
Bridge mode no
Sustainable product not specified
Input jack (6.3 mm) + XLR, USB
Built-in filter HPF, LPF, band pass
Built-in protection overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor yes
Cooling ventilator
RMS power (4 ohms) per channel not specified
RMS power (at 8 Ohms) per channel not specified
Amplifier class D
Amplifier output locking speaker connector
Equipped with crossover no

Weight and dimensions including packaging

Weight (incl. packaging) 6,7 kg
Dimensions (incl. packaging) 56,0 x 39,0 x 17,0 cm

Product specifications

  • Behringer NX6000D
    • class D amplifier
    • peak power: 2x 1,600 Watts at 8 Ohms / 2x 3,000 Watts at 4 Ohms
    • bridged peak power: 3200W (8 Ohms), 6000W (4 Ohms)
    • frequency range: 20 - 20.000 Hz
    • THD: <0.01%
    • S/N ratio: >100 dB
    • dampening factor: >140 dB @ 8 Ohms
  • connectors:
    • 2x XLR/TRS combo (input CH A/B)
    • 2x lockable speaker connection (output CH A/B)
    • power cable
  • controls
    • 2x volume (CH A/B)
    • power
    • crossover (LF/bandpass/HF, rear)
    • mode (bridge/stereo/mono)
  • dimensions: 94 x 483 x 316 mm
  • weight: 6 kg
A review can no longer be written about this item

There are no reviews for this product yet.

Other products from Behringer

Find all products of the brand Behringer

Alternative products by other brands

Search all products in category Amplifiers
Compare your gear (1/10)