Crown DriveCore XLS 2502 PA Amplifier

4.7 / 5

Specifications

Product features

Sustainable product: Not specified
RMS power (4 ohms) per channel: 700 - 799 watts
RMS power (at 8 Ohms) per channel: 400 - 449 Watts
2-ohm compatible: Yes
Amplifier class: D
Number of amplifier channels: 2
19-inch rack size: 2U
Amplifier output: Locking speaker connector, wire clamps
Input: Jack (6.3 mm), RCA, XLR
Equipped with crossover: Yes, variable
Built-in DSP processor: Yes
Cooling: Ventilator
Bridge mode: Yes
Built-in protection: Overload, thermal, square wave / DC voltage, peak limiter, clip indicator
Audio loop output: Yes
Built-in filter: HPF, LPF

Weight and dimensions including packaging

Weight: 6,2 kg
Dimensions: 55,0 x 37,0 x 15,0 cm

Product specifications

PA amplifier
class: D
DriveCore technology
high, low and bandpass filters for each channel
option to turn off LED indicators
selectable input sensitivity
automatic sleep mode
security settings with code
remote power trigger
Peakx limiters
inputs: XLR, RCA and jack
PureBand crossover system
sensitivity: 1.4 Vrms
frequency range: 20 Hz – 20 kHz
frequency response: + 0 dB, –1 dB
signal to noise ratio: 103 dB
THD: > 0.5%
dimensions: 48.3 x 8.9 x 10.7 cm
19-inch model
weight: 4.9 kg

Specifications

Product features

Sustainable product: Not specified
RMS power (4 ohms) per channel: 700 - 799 watts
RMS power (at 8 Ohms) per channel: 400 - 449 Watts
2-ohm compatible: Yes
Amplifier class: D
Number of amplifier channels: 2
19-inch rack size: 2U
Amplifier output: Locking speaker connector, wire clamps
Input: Jack (6.3 mm), RCA, XLR
Equipped with crossover: Yes, variable
Built-in DSP processor: Yes
Cooling: Ventilator
Bridge mode: Yes
Built-in protection: Overload, thermal, square wave / DC voltage, peak limiter, clip indicator
Audio loop output: Yes
Built-in filter: HPF, LPF

Weight and dimensions including packaging

Weight: 6,2 kg
Dimensions: 55,0 x 37,0 x 15,0 cm

Product specifications

PA amplifier
class: D
DriveCore technology
high, low and bandpass filters for each channel
option to turn off LED indicators
selectable input sensitivity
automatic sleep mode
security settings with code
remote power trigger
Peakx limiters
inputs: XLR, RCA and jack
PureBand crossover system
sensitivity: 1.4 Vrms
frequency range: 20 Hz – 20 kHz
frequency response: + 0 dB, –1 dB
signal to noise ratio: 103 dB
THD: > 0.5%
dimensions: 48.3 x 8.9 x 10.7 cm
19-inch model
weight: 4.9 kg

Service promise

Bax Music Warranty This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Reviews (6)

4.7

6 reviews

Rating

5 stars 4 4 stars 2 3 stars 0 2 stars 0 1 star 0

Write a review

Reviews from other countries

5 / 5

Crown DriveCore XLS 2502 PA Amplifier

Délai de livraison nickel bien emballé l'ampli offre beaucoup de possibilités correspond à mes attentes

November 19, 2024 | Anonyme

This review was automatically translated from French.

5 / 5

Crown DriveCore XLS 2502 PA Amplifier

Ben erg tevreden, mijn repeteerruimte is niet optimaal, vermits wij oefenen boven een bedrijfshal, hier hebben we last van veel spanningsvallen en interferentie van de zware maschines.
Sinds dinsdag gebruiken wij nu deze crown ampliefier, en wij waren verbaasd over het resultaat:
Geen brom, geen ruis, geen krakende geluiden meer, onvoorstelbaar.
Onze passieve speakers staan op 4 ohm, uiteraard full range, de amplie heeft een verbazend enorme kracht,zonder de minste moeite, wordt zelfs niet warm ?onze oude amplies zijn van dynacord,de pica 2450 , stonden in bridge modus, maar dit is met onze nieuwe crown zelfs niet nodig, power zat.
Ik vind de prijs kwaliteit verhouding optimaal, veel versterker voor weinig geld, een echte aanrader.

September 30, 2024 | Patrick Buntinx