Based on more than 21,240 customer reviews

Behringer NX6000D Amplifier with DSP Processor

no reviews yet
Behringer NX6000D Amplifier with DSP Processor

Discontinued

This product can no longer be ordered

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
No
Sustainable product
Not specified
Input
Jack (6.3 mm) + XLR, USB
Built-in filter
HPF, LPF, band pass
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor
Yes
Cooling
Ventilator
RMS power (4 ohms) per channel
Not specified
RMS power (at 8 Ohms) per channel
Not specified
Amplifier class
D
Amplifier output
Locking speaker connector
Equipped with crossover
No

Weight and dimensions including packaging

Weight
6,7 kg
Dimensions
56,0 x 39,0 x 17,0 cm

Product specifications

  • Behringer NX6000D
    • class D amplifier
    • peak power: 2x 1,600 Watts at 8 Ohms / 2x 3,000 Watts at 4 Ohms
    • bridged peak power: 3200W (8 Ohms), 6000W (4 Ohms)
    • frequency range: 20 - 20.000 Hz
    • THD: <0.01%
    • S/N ratio: >100 dB
    • dampening factor: >140 dB @ 8 Ohms
  • connectors:
    • 2x XLR/TRS combo (input CH A/B)
    • 2x lockable speaker connection (output CH A/B)
    • power cable
  • controls
    • 2x volume (CH A/B)
    • power
    • crossover (LF/bandpass/HF, rear)
    • mode (bridge/stereo/mono)
  • dimensions: 94 x 483 x 316 mm
  • weight: 6 kg

Alternative items

Specifications

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
2
Audio loop output
No
Bridge mode
No
Sustainable product
Not specified
Input
Jack (6.3 mm) + XLR, USB
Built-in filter
HPF, LPF, band pass
Built-in protection
Overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor
Yes
Cooling
Ventilator
RMS power (4 ohms) per channel
Not specified
RMS power (at 8 Ohms) per channel
Not specified
Amplifier class
D
Amplifier output
Locking speaker connector
Equipped with crossover
No

Weight and dimensions including packaging

Weight
6,7 kg
Dimensions
56,0 x 39,0 x 17,0 cm

Product specifications

  • Behringer NX6000D
    • class D amplifier
    • peak power: 2x 1,600 Watts at 8 Ohms / 2x 3,000 Watts at 4 Ohms
    • bridged peak power: 3200W (8 Ohms), 6000W (4 Ohms)
    • frequency range: 20 - 20.000 Hz
    • THD: <0.01%
    • S/N ratio: >100 dB
    • dampening factor: >140 dB @ 8 Ohms
  • connectors:
    • 2x XLR/TRS combo (input CH A/B)
    • 2x lockable speaker connection (output CH A/B)
    • power cable
  • controls
    • 2x volume (CH A/B)
    • power
    • crossover (LF/bandpass/HF, rear)
    • mode (bridge/stereo/mono)
  • dimensions: 94 x 483 x 316 mm
  • weight: 6 kg
bax-shop.uk | B-stock

Product information

Product no: 9000-0046-0390

General

The Behringer NX6000D is a lightweight, class-D amplifier with two-channels and a massive 1,600 Watt power capacity at 8 Ohms. It's packed with modern technology such as Zero-Attack limiters and a DSP. The limiters keep a watchful eye on the operating temperatures and make sure the device doesn't overheat, even at maximum output, while SmartSense flattens out the frequency range at any level of impedance. The amplifier offers three user modes: mono, stereo and bridged. When set to bridge mode and combined with a 4-Ohm input, this amp puts 6,000 Watts at your disposal. There's an extensive DSP section on-board with a delay, crossover and 8-band parametric EQ and you can use the USB port and Behringer's NX Edit software to adjust, operate or monitor the NX6000D and create your own presets.

Bax Music Warranty This product comes with a 3-year warranty when you register it with Behringer within 90 days of purchase. If the product is not registered it has a 2-year warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Alternative products by other brands

Search all products in category Amplifiers
Compare your gear (1/10)
Clear Compare