▾

Devine MX-800 2-Channel PA Power Amplifier, 2x 400W at 8 Ohms

Discontinued, this product can no longer be ordered.

No alternatives found

Product information
360° Photo
Reviews (1)

Devine MX-800 2-Channel PA Power Amplifier, 2x 400W at 8 Ohms
Product no: 9000-0095-0964 Bax Music Warranty: This product comes with a 3-year warranty.

General

Designed to power passive speakers, the hefty Devine MX-800 PA two-channel power amplifier supplies 400 Watts per channel at 8 Ohms or 600 Watts per channel at 4 Ohms, and in Bridged mode, gives you 800 Watts at 8 Ohms to accommodate a powerful passive subwoofer. Hook up your passive speakers via the wire terminals or extra-reliable SpeakON ports found on the rear panel and connect audio sources via the fitted set of balanced XLR and TRS jack inputs and be assured of interference free sound - even when using longer cables, while the Ground-Lift switch efficiently counters any noise caused by ground loops.

Tips or comments about this product

Please note: This Devine amplifier is compatible with passive speakers with the following specifications:
- passive full-range speakers, power rating: +/- 266W at 8 Ohm
- passive subwoofers, power rating: +/- 200W at 8 Ohm

Specifications

Product features

19-inch rack size	2U
2-ohm compatible	no
Number of amplifier channels	2
Audio loop output	no
Bridge mode	yes
Sustainable product	not specified
Input	jack (6.3 mm), jack (6.3 mm) + XLR, XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor	no
Cooling	ventilator
RMS power (4 ohms) per channel	600 - 699 watts
RMS power (at 8 Ohms) per channel	400 - 449 Watts
Amplifier class	AB
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	12,2 kg
Dimensions (incl. packaging)	52,0 x 40,5 x 14,0 cm

Product specifications

power (RMS):
- 2x 400W at 8 Ohms
- 2x 600W at 4 Ohms
- bridged at 8 Ohm: 1x 800W
Class AB
frequency response: 20Hz - 20kHz
input sensitivity: 1.4V / 32dB / 1.0V
input impedance: 20 kOhm / 10 kOhm
damping factor: >350
S/N ratio: >95dB
power supply: 220 - 240V AC, 50/60 Hz
connections:
- inputs: XLR/TRS (balanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x speakON, optional
Ground Lift function
dimensions (W x D x H): 48.2 x 32.1 x 8.8cm (2 U/HE)
weight: 11.5 kg