Discontinued, this product can no longer be ordered.
Not sure if the Allen & Heath GL2800-840 PA and studio mixer is for you? Do a Choice Check.
Start Choice Checker
Allen & Heath GL2800-840 PA and studio mixer
Product no: TM-AHGL2800-840
Bax Music Warranty:
This product comes with a 3-year warranty.
General
The GL2800 features ten AUX sends, including a special stereo aux, and it uses the 12x4 matrix, making it ideal for IEM and stereo recordings. Eight audio groups and L, R and M buses are also featured, for full dual functionality with ten mixes with faders, inserts and XLR controls.
At the heart of this design is the new gain structure, which features a maximum input capacity of 34 dBu, and a very quiet head amp section. The GL2800 is designed for any live sound application, like theatres, music events, houses of worship, festivals, company AV, stadiums, etc. With its neat, intuitive layout and analogue technology, clear sound and high dynamic range, it delivers a performance that's comparable to digital mixers.
Tips or comments about this product
- Please note: this mixer features an RPS11 external power supply.
Specifications
Product features
| 19 inches |
no |
| Number of auxiliaries |
> 8 |
| Number of microphone inputs |
> 32 |
| Number of mono channels |
> 32 |
| Number of stereo channels |
4 |
| Number of submasters |
8 |
| Phantom power |
no |
| Headphone output |
yes |
| Built-in audio interface |
no |
| Built-in audio player |
no |
| Built-in effects |
no |
| Built-in mixer effects |
channel EQ |
| Inputs |
yes, only mono channels |
| Type of mixer inputs |
microphone input (XLR), balanced line input (TRS jack) |
| Type of mixer |
studio / PA mixer |
| Type of mixer outputs |
balanced line output (XLR), balanced line output (TRS jack), stereo headphone output (TRS jack or mini jack) |
| Volume control |
faders |
Weight and dimensions including packaging
| Weight (incl. packaging) |
10,0 kg |
| Dimensions (incl. packaging) |
Not yet known |
Product specifications
- 40 channel frames
- LR and M mix buses
- 8 audio groups with pan and routing to LR and M
- 10 auxes with a special stereo send
- 2 multifunctional stereo channels with mic as well as stereo line inputs
- 2 extra dual stereos provide 4 summed or independent stereo returns
- fully featured 12 x 4 matrix
- suited for FOH as well as monitor mixing
- recording-capable with channel direct outputs
- M can be used for centre/sub mix, LR mono sum, or engineer's wedge
- matrix external inputs with level trims and common input capacity
- stereo channel mic inputs can cross-patch into matrix for ambience feed
- responsive 4-band, 2-sweep EQ
- 100Hz channel high-pass filters
- individual phantom power supply and polarity switching
- wide-angle channel and master meters
- special stereo monitor meters
- pre/post fader aux switch per channel
- recessed pre/post EQ aux switch per channel
- internal jumper plugs for aux, direct out and other options
- mutes on all fader masters
- 100mm sealed faders
- assignable talkback on all outputs
- 1 kHz oscillator / pink noise generator with external output
- 2-track monitoring and replay to LR
- three headphones / in-ear sockets and local monitor outputs
- electronically balanced XLR outputs with +26 dBu drive capability
- preamp with 74dB range and +34 dBu input capability for mic or line
- low-noise mix head amp design
- uses external linear power supply
- built-in combiner for redundant backup supply
- metal jacks, gold-plated XLRs and sealed pots and switches
- individual circuit card assembly with nutted pots
- solid copper bus bar earthing
- sys-link V2 console link function
- 4-pin lamp sockets
