The Radial LX8J line-level splitter has eight inputs channels, each fitted with a Jenson transformer, and can be set up to send multiple channels to three destinations.
The Catapult TX4 from Radial is a signal splitter/extender for an EtherCON cable. This module consists of 4 XLR (female) inputs, 4 XLR (male) outputs and 2 Neutrik EtherCON outputs.
By adding the Radial HotShot 48V microphone switcher to the set up, you can easily flip between two outputs. This box can handle condenser mics and is essential for clear communication with band mates or the sound tech.
The Radial JDX-48 Phantom is the successor of the JDX Reactor. This popular guitar amp DI box supports 48V phantom power and guitar amps up to 300 watts. For added bass, a bass extension option is available.
The passive Radial ProAV2 stereo multimedia DI box is fully set up to support instruments, media players, smartphones, and laptops.
The Radial StageBug SB-4 has been specifically designed for acoustic instruments that are equipped with a passive piezo pickup, like violins, mandolins and cellos.
Ready to route signals to PA systems and stage snakes, the Radial JPC is a handy active stereo DI box that can be connected to laptops, computers and other bits of electronics with ease.
The magic little box that is the passive Radial Mix2:1 two-channel mixer takes two incoming signals and blends them into one workable mono signal.
The Radial IceCube IC-1 Balanced Line Isolator eliminates the hum and other noise caused by ground loops. This compact bit of kit offers a linear response from 20 to 18,000 Hertz and comes in a gig-grade steel housing.
Send a balanced signal to three different destinations and complete jobs like sending a microphone signal to a PA and pair of recorders at the same time with the tidy Radial LX3 passive splitter box.
The Radial PZ-DI is a welcome, expansive DI that is excellent for amplifying acoustic and/or orchestra instruments on stage. Thanks to the impedance switch, it can adapt to standard, piezo and magnetic inputs.
The Radial J-Iso is a stereo line isolator that converts a balanced output from a mixer into a signal for the audio inputs of a recorder or computer. Brings the signal down to a manageable -10 dB.
One of the best professional DI boxes is now available in stereo! The Radial JDI Stereo ensures a balanced low-impedance signal that is as good as distortion-free and virtually without phase deviation.
Would you like to send your signal to two devices without having to play it in twice? Then Radial's LX-2 line splitter is the box for you. This is because the incoming signal is split and sent via two XLRs.
This built-in DI is going to be a real hit in conference and meeting rooms. Once built-in, this DI is extremely simple to operate. Just set the volume and then you are ready for your presentation.
Filters