(B-Stock) Devine MX-1000 2-Channel PA Power Amplifier, 2x 50

B-stock information

Warranty:	This product comes with a 3-year warranty.
Complete	Yes
Original packaging	Damaged
Condition of product	Traces of use (no damage/scratches)
What is a B-Stock Item? Any item we can no longer sell as new is labelled B-stock. This can be for a number of reasons, including damaged or missing packaging, or because the item shows light signs of use. In any case, you can expect the item to work just fine. Always Read the B-Stock Info Every B-stock product page includes relevant information about the item. Be sure to read it in full! Under the Product Information tab, you will find the original product description and specifications, which may refer to accessories that are not included with the B-stock item. This can be a cable, a remote control, software or any other accessory. B-Stock Product Photos B-stock photos can give you a good idea of the condition of the item, its packaging and (missing) contents. Here, what you see is what you get. The photos usually include: A photo of the original item A photo of the B-stock item plus included packaging and accessories (if applicable) A photo of the front of the B-stock item A photo of the back of the B-stock item Photos of any damage (if applicable) Original Packaging Status Packaging in good condition: undamaged, at most some tape residue Packaging damaged: box has dents, tears and/or holes Packaging missing: has been replaced with a Bax Music box. Item Condition Status: New: the product itself is like new, but the packaging may no longer look like new Traces of use (no damage/scratches): smudges, fingerprints and/or dust Scratches/damage: product has scratches and obvious damage Can I Return a B-Stock Item? Yes, our 30-day money-back guarantee also applies to B-stock items. Do I Get a Warranty on B-Stock Items? Yes, the standard warranty period usually applies to B-stock items as well.

(B-Stock) Devine MX-1000 2-Channel PA Power Amplifier, 2x 500W at 8 Ohms
Product no: 5000-0026-7601 Bax Music Warranty: This product comes with a 3-year warranty.

General

Tips or comments about this product

Note: This amplifier from Devine is suitable for passive speakers with the following specifications:
- Passive fullrange speakers, load capacity: +/- 333 Watt @ 8 Ohm
- Passive subwoofers, power handling: +/- 250 Watt @ 8 Ohm

Specifications

Product features

19-inch rack size	2U
2-ohm compatible	no
Number of amplifier channels	2
Audio loop output	no
Bridge mode	yes
Complete	Yes
Sustainable product	not specified
Input	RCA, RCA + XLR, XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, square wave / DC voltage, peak limiter, clip indicator
Built-in DSP processor	no
Cooling	ventilator
Original packaging	Damaged
RMS power (4 ohms) per channel	700 - 799 watts
RMS power (at 8 Ohms) per channel	500 - 599 Watts
Condition of product	Traces of use (no damage/scratches)
Amplifier class	H
Amplifier output	locking speaker connector, wire clamps
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	13,8 kg
Dimensions (incl. packaging)	54,0 x 42,5 x 15,0 cm

Product specifications

powerful PA power amplifiers for driving passive loudspeakers
a range of different models available
sleek front control panel with ventilation grille
temperature-controlled fan system with front-to-back cooling
magnetically suspended fans to prolong service life and reduce operating noise
different models, capacities and features to meet a range of requirements
compatibility with 19-inch racks. Each amplifier model has a height of 2U/HE
soft start (prevents inrush spikes, especially when several amplifiers are switched on at the same time)
equipped with the necessary protection circuits and systems (CLIP limiter, DC output protection, power protection, etc.)
LED status indicators on the front panel
supports standard stereo and bridge functions
adjustable signal input: stereo/parallel/bridge
features the necessary professional inputs and outputs for optimal audio and recording setup
high-quality circuit construction and high-performance components ensure optimal power generation
power output (RMS):
- @ 8 Ohms: 2x 500 W
- @ 4 Ohms: 2x 750 W
- Bridged @ 8 Ohms: 1x 1000 W
class: H
frequency response: 20 Hz - 20 kHz
input sensitivity: 1.4 V / 0.775 V
input impedance: 20 kOhm / 10 kOhm
damping factor: > 200
S/N ratio: > 100 dB
power supply: 220 - 240 V AC, 50 / 60 Hz
connections:
- inputs: XLR (balanced), RCA (unbalanced)
- speaker outputs: 2x speakON + wire terminals
- bridged outputs: 1x wire terminals
ground lift function
dimensions (WxDxH): 48.2 x 37 x 8.8 cm (2 U/HE)
weight: 13.5 kg

Write a review