Eurolite Akku TL-3 QCL RGB+UV Truss Light

General

This Akku TL-3 QCL RGB+UV LED spotlight is perfectly suitable as a truss light and can easily be placed in or between truss(parts). As the spotlight is compact and runs on a rechargeable battery, you are not bothered by cables. Even if you want to run the spot via DMX, you can do so completely wirelessly, as the Akku TL-3 supports QuickDMX - Eurolite's wireless DMX system. The spot features three powerful 4-watt LED lamps in a 4-in-1 configuration, i.e. in the colours RGB+UV, and is mainly suitable for working together with Alutruss Decolock DQ3 3-point systems. When the battery is fully charged, the spotlight can last up to ten hours in energy-saving mode. In terms of control, there are several options: there is an auto mode where built-in light shows are played automatically, but via the built-in microphone you can also put the spotlight in music mode. In addition, DMX is fully supported and you can put the spotlight in master/slave mode.

Direct colour selection, 10-step colour temperature adjustment and much more

You can save and load a colour selection directly via up to 20 presets, and it is also possible to gradually change the colour temperature from 2700k to 8000k. Stepless RGB/UV colour mixing is among the options, as are colour change, colour fade, dimming, variable-speed strobe effect, sound control and white balance. Addressing and changing settings is done via the on-board LCD. An infrared remote control is included and allows wireless control of the spotlight. If you want to install several Akku TL-3 spots in your setup, you can. You can connect up to eight units with a loop-through IEC cable. If you operate outside the EU, a switch mode from 240 volts to 100 volts is ideal. The Akku TL-3 QCL RGB+UV spotlight features this function.