Not sure if the DPA 4099U d:vote universal clip microphone is for you? Do a Choice Check.
Start Choice Checker
DPA 4099U d:vote universal clip microphone
Product no: 9000-0010-7740
Bax Music Warranty:
This product comes with a 3-year warranty.
General
The d:Vote 4099U universal clip microphone by DPA is suited for a wide range of instruments. It's been specifically designed for oblong instruments with an unusual shape, like hobos, clarinets, bassoons and flutes. As it uses a fastening system with a hook and loop pull ring, you'll be able to attach it as fast as you put on your watch. Thanks to a 14cm gooseneck, the microphone is highly flexible - you can bend it into all directions, so that it will never get in the way, making the DPA d:vote 4099U universal clip microphone an especially practical unit for audio recordings with your instrument.
Microphone
The microphone at the end of the 14cm gooseneck is a super-cardioid one with a condenser capsule. It has a frequency range of 80 to 20,000 Hz, a maximum SPL of 142 dB and a dynamic range of 100 dB, so that you'll be able to pick up any audible sound from your instrument! A 1.8m cable runs from the mic to your recording gear, like the accessory XLR adapter, for instance. The latter is small enough to clip to your belt, so that you can lead the signal via an XLR cable.
Specifications
Product features
Connection type
Microdot, XLR 3p
Microphone sensitivity (dBV/PA)
-44
Maximum SPL
140 dB - 149 dB
Maximum frequency
20 - 20.9 kHz
Minimum frequency
20 - 21 Hz
Polar pattern
super cardioid
Especially for
wind instruments
Weight and dimensions including packaging
Weight (incl. packaging)
456 gr
Dimensions (incl. packaging)
25,0 x 15,0 x 8,0 cm
Product specifications
universal clip microphone with a clear and natural sound
total harmonic distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
maximum SPL: 142 dB
dynamic range: 100 dB
output impedance from MicroDot: 30 to 40 ohms, from DAD6001: 100 ohms
Common Mode Rejection Ratio (CMRR): > 60 dB from 50 - 15.000 Hz with DAD6001 XLR-adapter
power supply: min. 5V to max. 50 V via DPA adapter for wireless systems; 48 V phantom power supply ± 4V via DAD6001 XLR-adapter
power consumption: 1.5 mA (microphone), 3.5 mA for DAD6001 XLR adapter
connector: MicroDot
polarity: positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
operating temperature: -40 °C to 45 °C (-40 °F to 113 °F)
relative humidity (RV): to 90 %
capsule diameter: 5.4 mm
microphone length: 45 mm
cable length: 1.8 metres
weight: 41 grams
including XLR adapter which can be hung from your belt
colour: black
A review can no longer be written about this item
Reviews from other countries
Translate all reviews into EnglishView original reviews
Dhr. Geert De Deken November 15, 2015
5
Wrote the following about DPA 4099U d:vote universal clip microphone
Fantastische microfoon voor live toepassingen op strijkinstrumenten in situaties die feedback gevoelig zijn. Klinkt goed ook. op cello, viool, saxofoon, gitaar.
De gitaar clip is niet zo handig, verschillende gitaristen hebben de microfoon al weggeslagen tijdens het spelen, hij hangt een beetje in de weg.