Based on more than 21,240 customer reviews

DBX 234XS Crossover

5 / 5
Popular
DBX 234XS Crossover

Specifications

Product features

Subwoofer output
Yes
Sustainable product
Not specified
Built-in limiter
No
Built-in compressor
No
Stereo crossover
Two and three-way
Mono crossover
Four-way
Output connector
XLR (3-pin)
Input
XLR

Weight and dimensions including packaging

Weight
1,8 kg
Dimensions
56,0 x 29,0 x 6,5 cm

Product specifications

  • crossover
  • balanced XLR inputs and outputs
  • module switch for stereo 2/3-way or mono 4-way operation
  • low frequencies added (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high-pass (low-cut) filter on both channels
  • phase switch on all outputs
  • independent level controls on all outputs
  • 24dB per octave, Linkwitz-Riley filters (the professional standard)
  • stereo/mono status LEDs
  • CSA NRTL/C approved
  • CE conformity
  • input connections: XLR
  • input type: electronic balanced/unbalanced, RF filtered
  • input impedance: balanced > 50 kOhms, unbalanced > 25 kOhms
  • maximum input level: +21 dBu balanced or unbalanced
  • output connections: XLR
  • input type: electronic balanced/unbalanced, RF filtered
  • output impedance: balanced 60 Ohm, unbalanced 300 Ohm
  • maximum output level in dBu: > +20 dBu balanced/unbalanced at 600 kOhm or more
  • stereo mode crossover frequencies low/high: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
  • stereo mode crossover frequencies low/mid: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
  • stereo mode crossover frequencies mid/high: 450Hz to 9.6kHz (x10 setting)
  • mono mode crossover frequencies low/low-mid: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
  • mono mode crossover frequencies low-mid/high-mid: 450Hz to 9.6kHz (x10 setting)
  • mono mode crossover frequencies high-mid/high: 450Hz to 9.6kHz (x10 setting)
  • filter type: Linkwitz-Riley, 24 dB/octave, variable status
  • low-cut on front panel: activates 40Hz Butterworth, 12dB/octabe high-pass filter
  • a low-cut switch per channel
  • phase shift: inverts the phase at the output, one switch per output
  • x10 on back panel: multiplies the crossover frequency per 10
  • one x10 switch per channel
  • mode switch on back panel: selects stereo/mono and 2/3/4-way operation
  • LF sum on the back: selects normal (stereo) or mono low-frequency operation
  • indicator for stereo operation: green LED
  • indicator for mono operation: yellow LED
  • indicator for low-cut: red LED per channel
  • indicator for x10: green LED per channel
  • indicator for phase shit: red LED per output (3 per channel)
  • band width: 20Hz to 20kHz; +0/-0.5dB
  • frequency response: 3Hz to 90kHz, + 0/-3dB
  • dynamic range: >106dB, unweighted, each output
  • signal/noise ratio: ref + 4 dBu, 22kHz measured bandwidth
  • THD + self noise: 94dB (low output); > 93dB (mid output); > 90dB (high output)
  • mono mode: >94dB (low and low/mid output), >92dB (high/mid outout), 88dB (high output)
  • operating temperature: 0°C to 45°C (32°F to 113°F)
  • power consumption: 15 Watts
  • power supply: 100 VAC 50/60Hz; 120 VAC 60Hz; 230 VAC 50/60Hz
  • dimensions: 483 x 175 x 45mm
  • weight: 1.8kg
Recommended price £345 -39%
£211 incl. 20% VAT
Online stock status: Order now and receive delivery within approx. 3 weeks
£10.55 one-time fee
Wishlist
DBX 234XS Crossover Innox RP AC Rack Fastener Pack

DBX 234XS + Innox RP AC

Recommended price
£216.25
Now as combination for
£215.00
You save
£1.25
Order now and receive delivery within approx. 3 weeks

Ordered before 10pm: Delivered in 2 Working Days (if in stock)

Free delivery from £50

Lowest Price Guarantee

Free Returns

3-Year Warranty

30-Day Trial Period

Specifications

Product features

Subwoofer output
Yes
Sustainable product
Not specified
Built-in limiter
No
Built-in compressor
No
Stereo crossover
Two and three-way
Mono crossover
Four-way
Output connector
XLR (3-pin)
Input
XLR

Weight and dimensions including packaging

Weight
1,8 kg
Dimensions
56,0 x 29,0 x 6,5 cm

Product specifications

  • crossover
  • balanced XLR inputs and outputs
  • module switch for stereo 2/3-way or mono 4-way operation
  • low frequencies added (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high-pass (low-cut) filter on both channels
  • phase switch on all outputs
  • independent level controls on all outputs
  • 24dB per octave, Linkwitz-Riley filters (the professional standard)
  • stereo/mono status LEDs
  • CSA NRTL/C approved
  • CE conformity
  • input connections: XLR
  • input type: electronic balanced/unbalanced, RF filtered
  • input impedance: balanced > 50 kOhms, unbalanced > 25 kOhms
  • maximum input level: +21 dBu balanced or unbalanced
  • output connections: XLR
  • input type: electronic balanced/unbalanced, RF filtered
  • output impedance: balanced 60 Ohm, unbalanced 300 Ohm
  • maximum output level in dBu: > +20 dBu balanced/unbalanced at 600 kOhm or more
  • stereo mode crossover frequencies low/high: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
  • stereo mode crossover frequencies low/mid: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
  • stereo mode crossover frequencies mid/high: 450Hz to 9.6kHz (x10 setting)
  • mono mode crossover frequencies low/low-mid: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
  • mono mode crossover frequencies low-mid/high-mid: 450Hz to 9.6kHz (x10 setting)
  • mono mode crossover frequencies high-mid/high: 450Hz to 9.6kHz (x10 setting)
  • filter type: Linkwitz-Riley, 24 dB/octave, variable status
  • low-cut on front panel: activates 40Hz Butterworth, 12dB/octabe high-pass filter
  • a low-cut switch per channel
  • phase shift: inverts the phase at the output, one switch per output
  • x10 on back panel: multiplies the crossover frequency per 10
  • one x10 switch per channel
  • mode switch on back panel: selects stereo/mono and 2/3/4-way operation
  • LF sum on the back: selects normal (stereo) or mono low-frequency operation
  • indicator for stereo operation: green LED
  • indicator for mono operation: yellow LED
  • indicator for low-cut: red LED per channel
  • indicator for x10: green LED per channel
  • indicator for phase shit: red LED per output (3 per channel)
  • band width: 20Hz to 20kHz; +0/-0.5dB
  • frequency response: 3Hz to 90kHz, + 0/-3dB
  • dynamic range: >106dB, unweighted, each output
  • signal/noise ratio: ref + 4 dBu, 22kHz measured bandwidth
  • THD + self noise: 94dB (low output); > 93dB (mid output); > 90dB (high output)
  • mono mode: >94dB (low and low/mid output), >92dB (high/mid outout), 88dB (high output)
  • operating temperature: 0°C to 45°C (32°F to 113°F)
  • power consumption: 15 Watts
  • power supply: 100 VAC 50/60Hz; 120 VAC 60Hz; 230 VAC 50/60Hz
  • dimensions: 483 x 175 x 45mm
  • weight: 1.8kg
bax-shop.uk | B-stock

Product information

Product no: AXL-234XS

General

The secret to good sound sits in the crossover you choose. With the DBX 234XS crossover, uncompromising high-performance is backed up by incredibly low noise, solid reliability and four decades of DBX knowledge and expertise. This takes the form of precision filters that carefully split the audio signal, before the corresponding frequencies are passed onto your speaker drivers. In the 234XS, you really do have one of the world's finest processors on your side.

The 234XS Does Exactly What You Expect, and More

This crossover only sends specific frequency ranges to each speaker, leaving your amplifiers free to use their full power for the usable signal. This means less distortion, and a brighter, undeniably better sound for the entire PA system. The DBX 234XS is also a double-channel crossover, and provides all of the functionality you would only expect of a pro-grade unit, including Linkwitz-Riley 24 dB/octave filters and independent gain control for tweaking the levels.

Extraordinary Crossover Functionality

The DBX 234XS has been gifted with a phase inversion for the output and a 40Hz low-cut filter. There's also the option to add the lower frequencies (subwoofer output) in mono. Every aspect of the design of this crossover has been completed with exacting precision, from the solid 'click' controls, to the high-quality TRS inputs and outputs.

Bax Music Warranty This product comes with a 3-year warranty.

Reviews (4)

5.0
4 reviews

Rating

5 stars 4 4 stars 0 3 stars 0 2 stars 0 1 star 0

Reviews from other countries

5 / 5

DBX 234XS Crossover

Aan te bevelen

Had voorheen de Samson x-over.

De dbx is zijn meerprijs meer als waard. Zowel kwalitatief als auditief is de dbx superieur.

Gebruik hem in studio opstelling met JBL speakers en Yamaha P7000S power

amps. Service van Bax voortreffelijk
 | 
This review was automatically translated from Dutch.
5 / 5

DBX 234XS Crossover

een uitstekend advies van bax-shop, zoals ik gewend ben.

de crossover us makkelijk in bediening.

geen aan/uitschakelaar op de crossover, voor mij geen probleem, zit op de stekkerbox in mijn 19inck rack.

 | 
This review was automatically translated from Dutch.
5 / 5

DBX 234XS Crossover

Makkelijk te bedienen apparaat. De frequentie knoppen hebben een plezierige rasterfunctie. Steeds 2 klikjes per streepje. Geluid is behoorlijk transparant en ruis is laag. Vind hem beter klinken dan budget dsp crossovers. Geluid van een paar - voorheen passief gefilterde high end toppen - is duidelijk beter geworden.
 | 
This review was automatically translated from Dutch.
5 / 5

DBX 234XS Crossover

Wij hadden voor een club een simpel te gebruiken maar toch kwalitatief goede crossover nodig. Deze DBX voldeed hier perfect aan, alles voelt gewoon degelijk aan, en is ook voor de minder gevorderde gebruiker goed uit te leggen hoe die bediend moet worden.
Wij gebruiken hem zelf als 3 weg crossover, ( mid/hi stereo en lo mono ), maar hij kan ook 4 weg aan.
Uit eerdere ervaringen weet ik dat het gewoon een heel degelijk product is, en ook in installaties heb ik er nog nooit problemen mee ondervonden! ++ voor degelijkheid en betrouwbaarheid!
 | 
This review was automatically translated from Dutch.

Other people also bought

Package deal

DBX 234XS + Innox RP AC

Product no: 9000-0062-1299

DBX 234XS Crossover Innox RP AC Rack Fastener Pack
Recommended price
£216.25
Now as combination for
£215.00
You save
£1.25
Order now and receive delivery within approx. 3 weeks

Other products from DBX

Find all products of the brand DBX

Alternative products by other brands

Search all products in category Crossover
Compare your gear (1/10)
Clear Compare