ART CLEANBoxPro Signal Converter

ART CLEANBoxPro Signal Converter
Product no: TA-ART-CLEANBOXPRO Bax Music Warranty: This product comes with a 3-year warranty.

General

Flip unbalanced signals to balanced signals and back again with insane ease thanks to the neat ART CLEANBoxPro converter. This two-channel signal converter offers a great solve when working with longer audio cables, features four inputs and outputs and a stereo input while the balanced inputs offer extra shielding against external electrical signals to counter noise.

The ART CLEANBoxPro Signal Converter

The unbalanced stereo RCA ports and mini-jack port are connected in parallel and the input signal is converted and outputted via balanced M-XLR ports. Two balanced F-XLR ports are fitted on the rear to be converted and outputted via the jack or RCA ports and volume controls have been fitted for both the incoming and outgoing signals to ensure consistent performance.

Specifications

Product features

Sustainable product	not specified
Number of channels	2
Type of DI box	active
Energy source	AC
Analogue audio input type	unbalanced line in (RCA), unbalanced stereo line in (TRS mini-jack), balanced line in (XLR)
Analogue audio output type	unbalanced line out (RCA/cinch), unbalanced stereo line out (TRS mini-jack), balanced microphone out (XLR)
Splitter	no
Ground lift function	no
PAD switch	yes

Weight and dimensions including packaging

Weight (incl. packaging)	600 gr
Dimensions (incl. packaging)	37,0 x 20,0 x 5,0 cm

Product specifications

sturdy, compact signal tranformer
converts unbalanced to balanced signals
converts balanced signals to unbalanced signals
2 channels
2x RCA jack input
2x RCA jack
1x stereo mini-jack (1/8”) input
2x M-XLR balanced output
2x F-XLR unbalanced input
frequency response: 20Hz to 20kHz, approx. 1dB
THD (Total Harmonic Distrortion): .01% at 1 kHz
signal- and to noise ratio: > 90 dB
signal to noise ratio: > 40 dB
input impedance: > 20 kOhm
unbalanced input impedance: 100k Ohms
balanced output impedance: 100 Ohms
unbalanced output impedance: 300 Ohms
max. gain balanced to unbalanced: -6dB
max. gain unbalanced to balanced: +21dBu
max. incoming signal: +21dBu
max. balanced signal output: +21dBu
max. balanced signal output: +15dBu
aluminium housing
dimensions: 117 x 47 x 109mm (W x D x H)
weight: 500g

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Theo L May 23, 2023

Wrote the following about ART CLEANBoxPro Signal Converter

Remedie tegen brom bij gebruik als enkele DI-box (rca->XLR): Het andere (on)gebruikte kanaal eveneens van phantom power (48V) voorzien.

Peter I. November 9, 2016

Wrote the following about ART CLEANBoxPro Signal Converter

Getest en perfect gewoon. Dank zij de vele mogelijkheden van de aansluitingen gaat dit altijd mee ;)

Joppe S. December 12, 2014

Wrote the following about ART CLEANBoxPro Signal Converter

Heb de CLEANBoxPro gekocht om mijn pro tapedeck op consumer gear aan te sluiten. Geen problemen en doet perfect wat het moet doen. Erg handig is de level aanpassing met de 2 potmeters. Echt een aanrader!

werner r. March 8, 2014

Wrote the following about ART CLEANBoxPro Signal Converter

moest van mp3 speler naar versterker gaan. via 3.5mm -> rca -> xlr
was de enige manier
met verloopstekker had ik helder geluid, nadeel was dat ik niet het volume kon halen dat nodig was. de signaal was daar te zwak voor.

Dus dan kom je eigenlijk op zo'n di box uit.

aangesloten en als je de volume knop al open draait dan direct al een brom over de speakers.
hoe harder je hem zet hoe harder de brom is.
wat ik ook deed maakte niet uit brom bleef.

nu jb systems mix 5.2 en daar totaal geen brom mee te horen en kan daar ook de volume nu met gemak halen. enige een lichte ruis over de speakers als je zonder signaal in de kanaal vol open zet. maar dat kan meer aan de rest liggen.