Devine Mic-DS XL Studio Drum Microphone Bundle

Devine Mic-DS XL Studio Drum Microphone Bundle
Product no: 9000-0089-1348 Bax Music Warranty: Devine MIC-DS 7-Piece Drum Microphone Set This product comes with a 3-year warranty. Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty. Innox IVA 46 Microphone Stand This product comes with a 3-year warranty. Innox IVA 28 Tabletop Microphone Stand This product comes with a 3-year warranty.

General

Offering a complete recording setup for a full drum kit, this Devine curated bundle includes a seven-piece drum microphone set, two high stands for the overheads, a short stand for the kick drum, and a pack of seven XLR cables. Neatly packed inside a foam-filled hard-case, you'll find a pair of condenser microphones designed to serve as overheads to capture the cymbals; a set of four dynamic instrument microphones that can be directly clipped to the rim of the snare and toms, and a dedicated kick drum microphone. All told, this comprehensive bundle is a solid and affordable one-shot solve for bands working on demos as well as entry-level engineers and producers.

Specifications

1x Devine MIC-DS 7-Piece Drum Microphone Set
The Devine MIC-DS pack sets you up with seven pro-grade microphones and all the necessary accessories for miking up a full, extensive drum kit. This full set comes complete with an aluminium case.

Product features

Sustainable product	not specified
Microphone sensitivity (dBV/PA)	not applicable
Microphone impedance	not applicable
Kick drum microphone included	yes
Includes case	yes
Overheads included	yes
Snare/tom microphones included	yes, 4
Special snare microphone included	no
Maximum SPL	not applicable
Maximum frequency	not applicable
Minimum frequency	not applicable
Polar pattern	cardioid
Especially for	drum sets
Instrument microphone type	not applicable

Weight and dimensions including packaging

Weight (incl. packaging)	2,0 kg
Dimensions (incl. packaging)	43,0 x 31,0 x 12,0 cm

Product specifications

7-part drum microphone set:

1x BM-10 bass drum microphone
4x TM-10 snare/tom microphone
2x CM-10 overhead condenser microphone
4x SDH037 microphone clips
2x SKSE115 microphone mounts
2x W-20 condenser microphone windscreens
1x aluminium carrying case

BM-10 bass drum microphone

dynamic microphone for bass drum
built-in windshield
pickup pattern: cardioid
frequency response: 50Hz - 14kHz
sensitivity: -58dB (+/-3dB) at 0dB, 1V/Pa at 1kHz
output impedance: 250 Ohm (+/- 30%) at 1kHz

TM-10 snare/tom microphone

dynamic microphone for snare drum and toms
built-in windshield
pickup pattern: cardioid
frequency response: 50Hz - 14kHz
sensitivity: -56dB (+/-3dB) at 0dB, 1V/Pa at 1kHz
output impedance: 250 Ohms (+/- 30%) at 1kHz

CM-10 overhead condenser microphone

condenser microphone for overhead recordings
pickup pattern: cardioid
frequency response: 50Hz - 18kHz
sensitivity: -45dB (+/-3dB) at 0dB, 1V/Pa at 1kHz
output impedance: 200 Ohms (+/- 30%) at 1kHz
maximum SPL: 136dB
S/N ratio: 60dB
phantom power: 9 - 52V

7x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	10.00 m
Set	no
Audio connector	3-pin XLR
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	498 gr
Dimensions (incl. packaging)	24,0 x 24,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

2x Innox IVA 46 Microphone Stand
Equipped with rubber grips, a solid, height-adjustable frame and an extendible boom arm with durable tightening knobs, the Innox IVA 46 goes way beyond budget microphone stand norms at an amazingly affordable price.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	yes
Height adjustable	yes
Colour	black
Stand material	metal
Maximum height of stand	160 to 170 cm
Included stand accessories	none
Mininum stand height	90 to 100 cm
Screw thread size	5/8 inch
Set	no
Construction	2-part telescopic
Type of stand	boom stand
Type of stand base	flat base feet

Weight and dimensions including packaging

Weight (incl. packaging)	2,2 kg
Dimensions (incl. packaging)	88,0 x 9,5 x 9,0 cm

Product specifications

Innox IVA 46
microphone stand
height adjustable: 980 - 1680mm
boom arm length: 470 x 830mm
folding tripod
rubber grips on arm and height adjustment knob
cast aluminium frame
weight: 2.15 kg

1x Innox IVA 28 Tabletop Microphone Stand
The Innox IVA 28 is a simple but effective, sturdy mic stand, designed to be placed on a table or desk top. The angle and height are both adjustable and it features a heavy base for extra stability.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	no
Height adjustable	yes
Colour	chrome, black
Stand material	steel
Maximum height of stand	50 to 60 cm
Included stand accessories	none
Mininum stand height	35 to 40 cm
Podcast bundle	no
Screw thread size	3/8 inch, 5/8 inch
Set	no
Construction	slanted base/boom
Accessory type	microphone stand
Type of stand	tabletop stand/tripod
Type of stand base	base plate

Weight and dimensions including packaging

Weight (incl. packaging)	2,1 kg
Dimensions (incl. packaging)	36,0 x 15,0 x 6,5 cm

Product specifications

dimensions (boom upright): 17 x 14 x 39 - 53cm
boom length (extendible): 36 - 50cm
thread size: 5/8" (3/8" when unscrewed)
boom microphone (pivots 180 degrees)
box contents:
- 1x boom
- 1x base

Write a review

Gad July 17, 2024

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music

Richard H. July 16, 2024

Wrote the following about Innox IVA 46 Microphone Stand

with the 51% reduction I don't think anybody would complain about this microphone stand. In fact it is a very versatile and adequate stand and has no trouble holding a dynamic microphone

Chris December 26, 2022

Wrote the following about Devine MIC-DS 7-Piece Drum Microphone Set

Overall the mic's are fine. They do their job perfectly well. However, I bought two sets of the mic's because my son has a large drum kit (7 drums 7 cymbals plus extra's), so needed enough mic's to cover everything....with a few to spare. Unfortunately, both pairs of overhead head mic's (in both sets) don't work....at all! They simply don't pick anything up. We tried changing the leads, and using leads that worked with the tom and bass drum mic's, but nothing....from all them! Pretty disappointing really :( Bax on the other hand were excellent at getting the gear to us, and would definitely recommend them :)

Colin W. April 23, 2021

Wrote the following about Innox IVA 28 Tabletop Microphone Stand

The Innox mic stand is well made and looks very smart. I use it with a single Behringer C2 condenser microphone (mass (75g) when I sing and play acoustic guitar in online sessions and virtual open mics. It sits beside my laptop on a desk, and has taken the place of a very heavy drum mic stand. The adjusting wheel works pretty well, but someone with weakness in the hand or wrist might like a larger wheel. I'd only knock a third of a star off for this!
If the stand is fully extended at a steep angle like 70-90 degrees, it is difficult to knock over.
I tried the stand out with the fairly heavy (285g) Shure 58A with XLR cable connected, and it was stable even at 50 degrees to the horizontal. This is pretty good, after all, you have to take sensible care with even the most stable of floor mounted mic stands.
When placed on a table or desk top extended, the Innox stand extends enough to position the microphone halfway between the guitar's soundhole and your mouth. By standing 45-50cm away, you can achieve a good balance between voice and guitar even if you move slightly, so the stand can also be used for home recordings.

Ash April 23, 2020

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.

Reviews from other countries

Translate all reviews into English View original reviews

Michel R. July 24, 2026

Wrote the following about Innox IVA 46 Microphone Stand

Très bien pour le prix. Le pied n'est pas lourd (2 Kg) et ne convient pas pour supporter sans risque un micro dynamique lourd en bout de perche horizontale sur une scène agitée.

Rob van Schaik September 18, 2025

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Goede microfoon kabels!!!

Nathan L. September 14, 2025

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Bon rapport qualité/prix je recommande

Ruben September 4, 2025

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Prima kabel voor een prima prijs. Netjes verzonden en een snelle levering top service!

Rick P. August 12, 2025

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

handig en goedkoop