Discontinued, this product can no longer be ordered.
Not sure if the Devine DM 20 set with NUX B-3, Artis 10A and stand is for you? Do a Choice Check.
Start Choice Checker
Devine DM 20 set with NUX B-3, Artis 10A and stand
Product no: 9000-0054-1537
Bax Music Warranty:
Devine DM 20 Dynamic Microphone This product comes with a 3-year warranty.
NUX B-3 Wireless Snap-On System This product comes with a 3-year warranty.
Devine Artis 10A MKII Active 10-inch Speaker This product comes with a 3-year warranty.
Innox IVA S-1 MKII Speaker Stand, 1.8m This product comes with a 3-year warranty.
General
Perform freely without cable clutter with the Devine DM 20 set. Connect the DM 20 microphone to the Artis 10A speaker using the included NUX B-3 wireless system. This system can be used anywhere without a permit. Mount the speaker to the included stand for enhanced sound quality.
Specifications
1x Devine DM 20 Dynamic Microphone
Solidly built, the Devine DM 20 dynamic vocal microphone can be used on stage, or simply at a computer for games and podcasts. Clip and cable included.
Product features
| Sustainable product |
not specified |
| Minimum frequency |
40 - 49 Hz |
| Maximum frequency |
16 - 16.9 kHz |
| Polar pattern |
cardioid |
| Maximum SPL |
not specified |
| Microphone sensitivity (dBV/PA) |
-52 |
| Microphone impedance |
600-649 ohms |
| Audio connector |
3-pin XLR |
| On/Off Switch |
Yes |
| Microphone weight |
not specified |
| Microphone set |
no |
| Microphone accessories |
microphone clip, cable |
Weight and dimensions including packaging
| Weight (incl. packaging) |
800 gr |
| Dimensions (incl. packaging) |
26,0 x 12,5 x 8,0 cm
|
Product specifications
- Devine DM 20 microphone
- Basic Microphone
- designed for recording speech, vocals and background vocals
- equipped with on/off switch
- metal housing with robust grille
- includes XLR cable: 5m
- microphone clip included
technical details:
- 3p XLR connector
- polar pattern: uni-directional cardioid
- frequency response: 40 Hz - 16 kHz
- sensitivity: -52 dB +/- 3 dB (ODB=1V/PA @ 1 kHz)
- output impedance: 600 Ohms +/- 30% (@ 1 kHz)
in the box:
- 1x Devine DM 20 microphone
- 1x XLR cable: 5 metres
- 1x microphone clip
1x NUX B-3 Wireless Snap-On System
The B-3 system by NUX turns any dynamic microphone into a wireless dynamic microphone. Since both the transmitter and receiver are battery-powered, it's the perfect snap-on system for mobile applications.
Product features
| Battery type |
rechargeable |
| Battery life (approx.) |
5 hours |
| Frequency band |
2.4 GHz |
| Includes microphone |
no |
| Channel |
2.4 GHz |
| Maximum frequency |
not applicable |
| Minimum frequency |
not applicable |
| Polar pattern |
not applicable |
| Switchable frequencies |
yes |
| Type of camera microphone |
other |
| Type of frequency band |
2.4 GHz |
| Output connector |
XLR (3-pin) |
| Transmission power |
not specified |
Weight and dimensions including packaging
| Weight (incl. packaging) |
400 gr |
| Dimensions (incl. packaging) |
16,0 x 12,5 x 7,0 cm
|
Product specifications
- NUX B-3
- wireless snap-on system
- frequency band: 2.4 GHz
- number of channels: 6
- power supply: built-in rechargeable lithium polymer battery
- transmitter connector: 3-pin female XLR (suitable for dynamic microphones)
- connection: 3-pin male XLR
Product features
| Number of stereo AUX inputs |
none |
| Playback options |
Bluetooth, USB drive, SD card |
| Bluetooth |
yes |
| Mid driver/woofer diameter |
10 inches |
| Tweeter diameter |
1 inch |
| DSP |
no DSP |
| Sustainable product |
not specified |
| Suitable as monitor |
yes |
| Weight per speaker |
9 kg |
| Total guitar/bass inputs |
none |
| Total line inputs |
2 |
| Total microphone inputs |
1 |
| Built-in equaliser |
yes |
| Speaker cabinet material |
plastic |
| Maximum SPL |
not specified |
| Maximum frequency |
18 - 18.9 kHz |
| Minimum frequency |
60 - 79 Hz |
| Mounting points |
35mm stand flange |
| RMS power in watts |
100 - 199 W |
| Analogue audio input type |
unbalanced line in (RCA), balanced line in (XLR), microphone input (TS jack) |
| Analogue audio output type |
balanced mix out (TRS jack), speaker output (lockable) |
| Passive speaker output |
yes |
Weight and dimensions including packaging
| Weight (incl. packaging) |
11,8 kg |
| Dimensions (incl. packaging) |
57,5 x 37,0 x 36,0 cm
|
Product specifications
- Devine Artis 10A MKII
- 10-inch active speaker
- type: full range
- frequency response: 60 Hz - 18 kHz
- amplifier type: class AB
- power capacity:
- sensitivity: 95 dB
- woofer: 10"
- tweeter: 1" driver
- treble dispersion: 90° x 60°
- crossover frequency: 3kHz
- inputs:
- microphone: jack
- line: XLR (3-pin), RCA
- outputs:
- link: jack
- speaker output: lockable SpeakOn connector
- equipped with:
- MP3 player (USB and SD)
- Bluetooth
- volume control:
- master volume control
- MP3 volume control
- line signal volume control (XLR and RCA)
- echo control (for mic and line 1 inputs)
- EQ:
- mains power: 230V AC, 50Hz
- fuse: F2A 250V
- nominal max. power consumption: 100 W
- dimensions: 390 x 325 x 580mm
- weight: 9 kg
- included:
- IR remote control
- power cable
1x Innox IVA S-1 MKII Speaker Stand, 1.8m
The Innox IVA S-1 MKII speaker stand is height adjustable, able to bear the weight of a speaker of up to 50kg, and is conveniently finished with a standard 35mm screw-thread. It also comes at a great price.
Product features
| Sustainable product |
not specified |
| Set |
no |
| Mininum stand height |
100 to 110 cm |
| Maximum height of stand |
180 to 190 cm |
| Stand weight capacity |
50 kg |
| Colour |
black |
| Wind-up mechanism |
no |
| Number of stands |
1 |
| Type of base |
tripod |
| Shock absorption system |
no |
| Stand material |
metal |
| Included stand accessories |
none |
| Weight per stand |
2 to 4 kg |
| Stand mount |
35mm flange |
Weight and dimensions including packaging
| Weight (incl. packaging) |
3,1 kg |
| Dimensions (incl. packaging) |
105,0 x 12,5 x 12,5 cm
|
Product specifications
- Innox IVA 1 MKII
- speaker stand
- tripod
- height adjustable: 100 - 180cm
- leg length: 66.3cm
- screw thread: 35mm
- load capacity: 50kg
- safety pin