Extrusions are metal strips that are mounted on the edges of a flight case to keep it together and protect it. Here, you'll also find rack extrusions for building your own double door or combo flight case, or your own 19-inch rack. If you're building your own flight case, you'll also need ball corners and flat corners.
The Adam Hall Hardware 6206F is an aluminium lid placement designed specifically for 10 mm material. With a length of 1 metre, this lid placement offers a reliable solution for robust applications.
This aluminium lid placement male for 10 mm material is ideal for fixing lids in robust applications. With a length of 1 metre, the profile offers a stable and reliable solution.
Sturdy 1-metre aluminium lid profile, suitable for 4.5 mm board material. Ensures a tight and durable connection when sealing flight cases.
The Adam Hall Hardware 6142F is an aluminium member location designed specifically for 7 mm material. With a material thickness of 1.5 mm and a length of 1 metre, it is perfect for rugged applications.
The Adam Hall 6115 aluminium case corner profile is ideal for robust and lightweight enclosures. With a length of 1 metre and a lay length of 25 mm, it provides sturdy support for various applications.
The rack is made of 2.0mm steel and is 10 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
Sturdy 1-metre aluminium lid profile, suitable for 13 mm plate material. Ideal for firm and precise closure of flight cases and case constructions.
If you are building a flight case for your valuable equipment, this edge extrusion is a great finishing touch. It is suited for plates with a thickness of 6.8 mm.
This 1-metre aluminium case corner has a lay length of 35 mm and a material thickness of 2 mm, ideal for robust and stable constructions. It is perfect for building sturdy frames and cases.
The rack is made of 2.0mm steel and is 16 U high. As there is a hole every 15 mm, you can mount whatever device you want with this rack.
The Penn Elcom E2215 U-shape extrusion is made of aluminium and is compatible with 9mm (3/8") thick boards, making it the ideal finishing touch for any self-built DJ furniture.
This rack strip is fitted with 9.5mm punched holes and has 5mm mounting holes for attachment to a flight case. This rack strip is made of 2.0mm steel and has a height of 3 U.
If you're busy building a custom flight case, then you can't do without closure profiles to finish off the edges and prepare it for a lid. This Penn Elcom profile is made of aluminium and is compatible with 9.5mm-thick panels.
Give your DIY flightcase the finishing touch with this aluminium extrusion. The Penn Elcom 0522 is ideal for DIY flightcases.
This aluminium capping channel is suitable for partitions of 9.5 mm thick material. With a length of 1 metre, it offers a strong and durable solution for finishing walls.
Are you building a flight case for your equipment? This aluminium angle extrusion makes the perfect final touch. The separate flight case elements stick together, and the angle extrusion protects your flight case against bumps while transporting it.
The Adam Hall 6130 1-metre aluminium "h" section is ideal for joining 9.5mm panels. It offers a sturdy and stable solution with a material thickness of 1.5 mm for various applications.
Putting together your own flight case? The Penn Elcom 0153 double angle extrusion will help protect it against knocks and bumps. It's 6.8mm thick and compatible with wooden panels.
Add several of these aluminium protective corners to your flight case to keep it held together nicely and protected against bumps during transport.
This 1.7-metre-long rack profile is made of 3mm aluminium and features pre-drilled holes with a 9.5mm diameter.
Are you building a flight case for your valuable equipment? With this aluminium angle extrusion you will be able to finish it off nicely! Keep your flight case secure and protected turning transport.
This rack strip is fashioned from 2.00mm steel and has a height of 20 U. Because it has mounting holes at 15mm intervals, you are free to mount any equipment you like.
This rack strip is made of 2.0mm steel and has a height of 14 U. It has 9.5mm holes at 15mm intervals, allowing you to mount any equipment you like.
This rack strip is fashioned from 2.0mm steel and has a height of 12 U.
The rack strip is made of 2.0 mm thick steel and has a height of 18 U. The holes have an interval of 15 mm so you are free to mount any device possible to this rack profile.
The Penn Elcom 6020 aluminium rack profile is designed to complete a cage-nut based sliding system. This profile is 100cm long, 25mm wide, and 25mm deep.
This rack strip is fashioned from 2mm steel and has a height of 8 U.
This rack strip features 9.5mm diameter punched holes at 15mm intervals. It can easily be attached to a flight case by means of its 5mm mounting holes. This rack strip is fashioned from 2.00mm steel and has a height of 2 U.
This rack strip is equipped with punched holes with a diameter of 9.5 mm each. The holes that are used for the mounting of the strip to the flight case have a diameter of 5 mm each. The rack strip is made of 2.0mm steel and is 4 U.
This single angle extrusion by Penn Elcom is made of aluminium and has a length of 1.70 m.
With this angle extrusion, your flight case will stay in one piece and is protected against bumps during transport. It is fit for wooden plates with a gauge of 10 mm.
The Adam Hall 6127 aluminium h-profile is ideal for connecting large panels. With an input thickness of 10 mm, this 1 metre-long profile offers a strong and stable connection.
This rack strip is equipped with 9.5mm punched holes and 5mm mounting holes. The strip is made of 2.0 mm steel and is 6 U high.
This Penn Elcom double rack profile is 12U high and comes pre-drilled with holes at 15mm intervals for eased installation.
This double rack profile from Penn Elcom has punched holes every 15 millimetres, making it very easy to install your equipment in your desired location. It has a height of 20 units.
The Adam Hall 6123M aluminium member location is perfect for fixing lid profiles in crates. With a length of 1 metre and an insertion thickness of 9.5 mm, it offers a sturdy and reliable connection.
The Adam Hall Hardware 6142M is an aluminium member location designed for 7 mm material. With a solid material thickness of 1.5 mm and a length of 1 metre, this profile is ideal for rugged applications.
The Adam Hall Hardware 6146 is an aluminium member maker for 7 mm panels, 1 metre long. This profile has a 7 mm weld-in thickness and a robust 1.5 mm material thickness, ideal for flush-fitting applications.
This aluminium channel is ideal for partition walls with a thickness of 9.5 mm. With a length of 1 metre, it provides sturdy support for mounting wall sections, suitable for various applications.
Sturdy 90 U aluminium 19" rack strip with continuous design for smooth sliding mounting in racks.
The Adam Hall 6129 1-metre aluminium casemaker is perfect for lightweight, robust cabinet constructions. With 7 mm input thickness and 1.5 mm material thickness, it offers a stable and versatile solution.
Durable 1-metre aluminium lid profile, suitable for 7 mm sheet material. Ideal for accurately closing flight cases and case constructions with a professional finish.
This 20 x 20 mm aluminium case corner profile is perfect for creating solid corners in case structures. With a length of 1 metre and a material thickness of 1.2 mm, it offers durable performance.
Sturdy 1-metre aluminium case angle profile measuring 30 x 30 mm. Ideal for reinforcing cases and enclosures with a professional finish.
This lid profile from Penn Elcom is from the N-Case range. When you are building your own flight case, solid profiles are a must.
This 1-metre aluminium casemaker is ideal for lightweight, robust designs. It has a thickness of 1.5 mm and offers versatile applications thanks to an input thickness of 9.5 mm and input height of 17 mm.
Sturdy 1-metre aluminium lid profile, suitable for 9.5 mm sheet material. Ideal for closing flight cases and cases with a precise fit.
This aluminium case corner has a length of 1 metre and is ideal for building solid corners in aluminium frames. It has a material thickness of 1.5 mm and a lay length of 22 mm.
