The Palmer PWT 08 MK2 is a multi-power supply for effects pedals that can be rack-mounted.
The Palmer WT PB 60 is the perfect accessory for your Pedalbay 60. It provides a power supply fully integrated into the pedalboard for as many as eight pedals.
The KA189 is a power adapter for the Korg AX pedals, D4, DT3, DT7, DT10, Electribe A, M, R & S, GT3 and GT12/120.
Did you lose or break the VOX DA5 adapter for your ToneLab ST multi-effect processor? No problem! The VOX KA259 will get you back in business.
This Eventide Universal Power Supply works with the Eventide Dot9, MixingLink and Rose effect pedals.
Compatible with most effect pedals, the EBS AD-9 PRO 9V DC, 1,000mA power supply can be coupled with a daisy chain to feed up to twenty stompboxes with power.
The MXR M242 Iso-Brick Pro is a high-quality pedalboard power supply in a compact and lightweight housing that can be mounted using the included hardware or set up as a standalone unit.
De One Control Distro MKII voedt je effectpedalen via tien geïsoleerde uitgangen, inclusief een regelbare 9-18V-uitgang. Ook te gebruiken met de One Control Daisy Chain Five.
Built to feed models including the Mooer GE300 and GE300 LITE with necessary power, the Mooer 9V DC Power Adapter comes fitted with a standard 2.1 barrel plug and provides a maximum 3,000mA.
With T Rex's Fuel Tank Classic power supply you'll never need to replace the batteries in your effects pedals again. This device has eight 9V DC outputs, a 12V DC output and a 12V AC output giving you a total of 1500 mA.
The T-Rex Fuel Tank Junior power divider for effects pedals features 5 separate isolated 9-volt outputs of 120 mA each, and comes with the necessary cables. If desired, you can combine with 2 outputs up to 1x 18 volts.
Truetone's 1 SPOT Pro CS6 is the world's first low profile power brick with switchable voltages. Thanks to its compact size it fits easily on or under your pedalboard. With 1600mA of power, the CS6 can run up to 6 effects pedals.
Feed an eight-stompbox-strong pedalboard with the help of the Stagg BLAXX 12V power supply pack. This little unit is just 9cm long and 3.5cm wide, and has eight 9V 300mA ports with a maximum output of 2A.
The Electro Harmonix EU96DC-200BI adapter is a much more reliable way to power your 9V EHX stomp boxes than a 9V battery. It supplies 200 mA at 9.6 volts.
Electro Harmonix's MOP-D10 Isolated Power Supply allows you to power up to 10 effects pedals from 9 volts DC without experiencing humming noises. This is because all outputs are isolated.
Truetone's XP8-PS is the ultimate compact multi-power supply that includes an adapter that you can easily link to other Truetone expansion boxes. The 9V DC outputs provide up to 500mA each.
Truetone's 1 Spot Pro CS11 offers several voltage options that allow you to power almost all types of effects pedals. The 11 fully isolated outputs are all rated for 9V DC. Other voltages are also provided.
Next to a 12V AC and an 18V DC output, the T-Rex Fuel Tank Goliath pedalboard power supply features another five outputs that offer 450 mA of current and can each be switched from 9 to 12V DC.
Using the Truetone 1 Spot Pro XP5, you can easily add 5 additional isolated outputs to your CS11 of the same brand. Each output delivers 9V and can handle 500mA of current consumption.
Truetone's 1 Spot Pro XP5-PS is a package that includes an XP5 combined with a 12V DC adapter capable of delivering up to 2500 mA. That way, you can easily power the XP5 without using a CS11.
This 9.6V adapter will save you plenty of batteries for the ToneCore stomp boxes.
If you use a Strymon adapter to power your pedalboard, the Strymon Ojai Expansion Kit gives you 5 additional isolated 9V outputs that each deliver up to 500 mA. The Expansion Kit comes complete with 5 power cables.
If you use a Strymon adapter to power your pedalboard, the Strymon Ojai R30 Expansion Kit gives you 5 additional outputs. The R30 Expansion Kit comes complete with 5 power cables.
Treat your pedalboard to high quality power with the Strymon Ojai: the most potent power supply of its size. This little blue box has all the capacity and flexibility to expand an arsenal of effects.
The Yuer PR-07 Full Isolated Power Supply is a multi-power supply that allows you to power the effect pedals on your pedalboard.
Mooer's Macro Power S8 allows you to power several effects pedals. After all, this multi-power supply has 8 outputs. You can select the AC voltage of this unit yourself.
Just in case the power supply that came with your Quad Cortex is long lost or has just seen better days, this Quad Cortex PSA is the official, compatible replacement.
The Walrus Audio Canvas Power HP unit is able to feed the most demanding modellers and pedals the necessary power thanks to an impressive 3A (3,000mA) output. The HP also supplies three isolated power outputs.
Ernie Ball serves up a complete, surefire multi-pedal power supply that's smaller than a fresh pack of strings and fits snugly in the palm of one hand. The Volt is a solid little power supply including a convenient universal adapter.
The Voodoo Lab Pedal Power 3 Plus power block provides 12 isolated outputs, each able to deliver 500mA of juice to your pedal-packed board. If you need more, 2 X-LINK ports can be used to add a Pedal Power X4 of X8.
Compact power supply for the reliable powering of various IK Multimedia guitar and audio products.
The Tone City TPS-06 is an isolated multi-power supply with six outputs, including 9V, 12V and 18V, featuring individual protection and low noise.
The Tone City TPS-08 is a fully isolated multi-power supply with eight outputs, including 9V, 12V and 18V, plus individual short-circuit protection.
The Tone City TPS-12 is a fully isolated multi-power supply with twelve outputs, multiple switchable voltages and individual short-circuit protection.
The Tone City Power Stick is a compact 9V multi-power supply with eight isolated outputs, six of which deliver 100 mA and two of which deliver 300 mA for effects pedals.
Powering your pedalboard is very easy with the One Control Micro Distro Tiny Power Distributor! With eight 9V outputs and one dedicated 12-18V variable output.
Powering your pedalboard is very easy with the One Control Micro Distro Tiny Power Distributor set! With eight 9V outputs and one dedicated 12-18V variable output. Includes adapter and cable set.
The One Control Minimal Series Distro MKII is a compact multi-power supply with 10 isolated outputs, including a variable SAG output. Includes a comprehensive cable set so you can get started right away!
One Control Micro Distro Power Supply power distributor
One Control's Minimal Series DC Porter MkII is a power supply in a rugged case designed specifically for mobile batteries. This device converts all standard power banks with USB-C to 9-volt DC.
