Fender American Performer Telecaster Neck Rosewood Fretboard

Fender American Performer Telecaster Neck Rosewood Fretboard
Product no: 9000-0090-4077 Bax Music Warranty: This product comes with a 3-year warranty.

General

Time for an upgrade? Or has the neck of your beloved sidekick seen better days? Gain the assurance and playability of Fender USA build-quality with the Fender American Performer Telecaster neck. This is exactly the same neck that you'd get with an American Fender Performer Tele, so you're treated to the light touch of twenty-two jumbo frets; the snug grip of a Modern-C profile and 9.5 inch fretboard radius; and the buttery-smooth feel of a satin-gloss finish. This Fender-stamped neck also adds the sweet warmth of a rosewood fretboard, and for maximum convenience, comes pre-drilled in all the right places

Tips or comments about this product

Let op: bij het bevestigen van de gitaarhals aan een matchende body, kan het voorkomen dat er toch nog enig specialistisch afstelwerk nodig is. Heb je hier geen ervaring mee? Laat dit dan doend door een ervaren gitaarbouwer. Je kunt hiervoor ook van onze afstel-en-onderhoud-service gebruik maken.

Specifications

Product features

Sustainable product	not specified

Weight and dimensions including packaging

Weight (incl. packaging)	1,3 kg
Dimensions (incl. packaging)	76,2 x 18,3 x 8,4 cm

Product specifications

Fender Telecaster Guitar neck
- series: American Performer
- neck material: maple
- fretboard: rosewood
- number of frets: 22
- fret type: jumbo
- neck profile: Modern C
- neck finish: satin-gloss urethane
- headstock finish: high-gloss urethane
- fretboard radius: 9.5" (241mm)
- scale length: 25.5" (648mm)
- nut material: synthetic bone (melamine)
- nut width: 42.8mm (1.685")
- truss rod nut: 1/8" (3.175mm) adjustable at the headstock
- made in the USA
special features:
- six pre-drilled machine head bore holes
- two pre-drilled holes for mounting each machine head
- finished with a serial number and inspection stamp
- '70s headstock' design by Fender
dimensions:
- machine head bore hole diameter: .404” (10.26mm)
- head diameter: 540mm
- width at 1st fret: .820” (20.82mm)
- width at 12th fret: .870" (22.09mm)