The Fender Custom Shop Custom '69 pickups encapsulate the Summer that changed everything. Mounted on a completely pre-wired pickguard, just solder up the output jack and treat your Strat to the sweet sound of classic.
The fully loaded Fender Custom Shop Texas Special SSS Pre-Wired Pickguard offers all dedicated Strat players access to classic Strat sound with a little more dust, grit, and attitude.
If you yearn for pure, vintage Stratocaster sound but are little nervous about tinkering with the electronics of your guitar, then Fender offer a ready-made, pre-loaded Vintage Noiseless SSS Pre-Wired Strat Pickguard.
Mount the Fender Original '57/'62 SSS Pre-Wired Pickguard to your Strat and reawaken the Alnico-5-based ghosts of the classic Pre-CBS Strats from the end of the late '50s and early '60s.
A worthy addition to any guitarist's kit bag, the Fender Mesquite is a fully humbucking soundhole pickup for the acoustic guitar. Specially designed by the guru himself Tim Shaw, this pickup has been specifically tuned to get the very best out of bronze-wound strings.
Mount this trio of white Fender Eric Johnson Signature Stratocaster single-coils and harness the distinct sound of Eric Johnson himself with your very own Strat.
Fender's Tex-Mex Telecaster Pickup Set consists of two overwound pickups for tight, clear bass and bright trebles giving you everything from clean to mean tones.
The set of Fender Gen 4 Noiseless Jazz Bass pickups are the sonic equivalent of cold fusion. In other words, they deliver an authentic vintage-style Fender tone free from interference.
For several months in 1951, Fender built a nameless guitar that was known as 'Nocaster' and went on to become the first Telecaster. This set of pickups pays tribute to that model and gives you that Tele twang.
This original Fender Mustang bridge is the perfect solution to the common problem with Jaguar and Jazzmaster bridges and is an excellent replacement part for the original. Fits vintage Japanese and USA models.
Three refined Fender single coils that will transform your Stratocaster. This Tex-Mex pickup set offers high-output, warm sounds with sparkling highs and a balanced tone.
Original Fender 500K solid shaft potentiometer for (bass) guitars with a humbucker pickup. The solid shaft is meant for screw-mounted knobs, like on the Telecaster and Precision Bass.
This component is a "No Load" potentiometer. It takes itself out of the circuit in position 10. Split shaft version for push-on type knobs.
Increase the tonal range of your electric guitar with the Fender TBX kit. This stacked 250K/1Meg potentiometer allows you to filter both treble and bass.
This is a set of 12 nickel-plated Fender screws for vintage style machine head. These little Philips screws attach the tuners to the headstock of your guitar. Also suited for vintage string guides.
Put your guitar's tremolo arm in any desired position using the Fender tension springs. This set includes 12 pieces so will last a lifetime!
After frequent use, the jack connector of your guitar may lose its capacity to send sound. This high-quality Fender mono output jack revives your signal!
Replace the corroded or stretched-out tremolo tension springs of your guitar with this set of original nickel-plated steel tremolo tension springs for American Vintage and Custom Shop guitars.
Need a little support while playing your Jazz or Precision bass? Use the Fender vintage-style thumb rest for Precision and Jazz Bass that can be used as a finger hold while you are playing slap bass. Mounting screws are included.
Do you want to give your Stratocaster an aged look? Then replace the stark white knobs with these original Fender Parchment knobs. Set of three skirt knobs consisting of one volume and two tone knobs.
This original vintage style Fender neck plate features an engraving of a '70s-style F logo to give your Stratocaster, Telecaster, Precision or Jazz Bass that extra Fender touch. 4 neck mounting screws included.
Add that authentic sixties Stratocaster look with these Fender aged white knob set. You'll receive one volume and two tone aged white knobs. Just like on a genuine '60s Strat!
This round string guide is a common sight on vintage-style Telecaster guitars, it is chrome-plated and comes with a vintage-style slot screw.
This new chrome Fender hardtail bridge for Standard and Classic series with string-through-body construction is perfect for guitar builders or as a replacement for a worn bridge.
Made by Schaller for Fender, '70s style machine heads with F logo. As used on (for example) American Vintage and Classic series Strats and Teles and ideal for restoring '70s Fender guitars.
The Fender Standard tremolo bridge is fitted with six bent steel saddles with 'Fender' stamps and a thick block for added sustain. This vintage-style bridge is found on Fender Mexico models from 2006 to present.
Do you need a neck plate for your Fender (bass) guitar? This chrome Fender neck plate fits 4-screw neck mounting without Micro-Tilt system. With beautiful Fender Corona California engraving.
This Fender vintage style neck plate is chrome plated and has no logos, just like the ones on the American Vintage guitars and bass guitars. Fits instruments with a 4-screw neck mounting without Micro-Tilt system.
The best component of choice to give your J Bass that vintage '60s look; a chrome-plated Fender vintage bridge cover with F logo for Jazz Bass.
A Fender bass guitar is easily customisable with a new pickguard, completely altering the overall look of your guitar. This 3-layer black Fender pickguard is suitable for modern Jazz Bass models, both USA and Mexico.
This mint green Fender pickguard for Stratocaster will add that special '60s vintage Strat look to your guitar. Fits Strats with an SSS pickup configuration and modern type 11-hole mounting.
Change the complete look of your guitar using only the components from this Fender Stratocaster accessory kit. This set comes in Aged White, so it’s perfect for a vintage look thanks to the faux-faded material.
This vintage Fender Telecaster bridge cover, or 'ashtray' cover, fits vintage-type three-saddle Telecaster bridges. Give your guitar that classic '50s, '60s and '70s look!
This tremolo system resembles that of the Fender American Vintage Stratocaster ('57, '62, '59 etc.). It’s made from the finest materials and equipped with a thick steel block for more tone and sustain. Includes mounting materials.
This Fender Pickup Tubing set consists of twelve rubber tubes that are placed between the pickups and the body of a guitar or bass guitar. They prevent the microphonic feedback and rattles that often occurs with metal springs.
This 14-piece Fender Custom Shop Tool Kit was designed by GrooveTech. It offers you all the professional tools to adjust your Fender electric or acoustic guitar or bass guitar.
A tremolo arm is often undone to put the guitar is a bag or cover. That is why it is a part that often goes missing. Luckily, Bax Music has one.
While this Fender multi-tool has been designed for setting up Fender guitars and basses, it packs a broad array of tools able to handle just as broad an array of instruments.
Want the same crisp sparkle at the bridge as well as the same rich sound from your neck pickup that early fifties Telecasters had? Fender have you covered with the Vintera '50s Vintage Telecaster Pickup Set.
Mount this three-pack of Fender Vintera '60s Vintage Stratocaster Alnico 5 single-coils on your Strat and gain the classic, balanced sound and sparkling edge of the sixties.
If you're working with a Fender American Professional Jaguar or Jazzmaster and the strings aren't sitting in quite the right place, then this official 7.25 inch radius bridge assembly is a more solid and logical solution.
Own or work on a lot of Fender guitars? Get the Fender 1/8-inch Truss Rod Adjustment Wrench Set and you'll have an Allen key for every model.
Need a fresh set of tremolo springs for your Strat? Grab this six-pack of Fender Tremolo Tension Springs.
Busy refreshing the look of your Strat? The devil's in the details so don't forget to replace the tremolo arm tip with a brand-new one!
If the tremolo arm tip of your Strat is cracked, battle-worn or just went missing long ago, this pack of two official Fender Stratocaster Tremolo Arm Tips will make your model gig-fresh again and set you up with a spare just in case.
This Fender Jaguar Jazzmaster Tremolo Assembly Japan is a bridge plate for the tremolo system of Fender Jaguar and Jazzmaster guitars built in Japan between 1986 and 1999.
The Fender Standard Series Stratocaster Tremolo Arm can be mounted on all right-handed Fender Standard and Deluxe Stratocasters built between 1986 and the present.
Filters