The Rode SM3-R is equipped with an improved suspension, compared to its predecessor, the Rycote Lyre, which prevents vibrations and contract sounds from disrupting your audio.
The RM5 can be used as a microphone holder for the NT5, NT55, NT6, NTG1, NTG2 and NTG3 by Rode.
This Blimp mount adapter by Rode can be fastened to a variety of stands or boom poles, thanks to the 3/8-inch screw thread.
The WS lavalier is a black windscreen that reduces wind and breathing noise. This windscreen is designed for use with Rode's lavalier mic. The set consists of three black WS lavalier windscreens.
These replacement bands can be used for the VideoMic Pro shotgun microphone. The elastic bands come in a set of 4.
The Minifur-HS1 windscreen significantly reduces wind and breathing noises. It can be used in combination with the HS 1B or the HS 1P headset microphone.
It can be clipped onto nearly any piece of clothing, because it uses two pins instead of a conventional clip.
Are you planning on using your Pin Mic microphone out of doors? In that case, the Deadmouse-Pin is what you need! Wind and breathing noises are reduced by this windscreen, making it ideal for outdoor use!
The Blimp Extension is an accessory by Rode Microphones, it lets you extend the Rode Blimp by 25.6 cm, so that you can use a Rode NTG-8, or other long shotgun microphone of up to 60 cm, in the Blimp.
The Rode invisiLav is designed to neatly be tucked away, under your clothing, for instance. Its soft construction absorbs vibrations and handling noise.
The Rode invisiLav is designed so that you can neatly tuck lavaliers away, underneath your clothing, for instance. Its soft construction absorbs all unwanted ambient noises.
Exclusively designed to fit the compact Rode VideoMic Go microphone, the Rode DeadCat Go windshield has been made from faux-fur to keep wind noise out of the recording, resulting in clean and clear sound when shooting outdoors.
The Pivot Adaptor by Rode is a practical adapter that allows you to attune the angle of your microphone clip re the stand. Thanks to the accessory screw thread adapter, the Rode Adaptor fits on nearly any stand.
The PG1 is a pistol grip for the VideoMic and the Stereo VideoMic.
The SM5 is a shockmount that allows you to mount Rode NT3, NT4, NT5, NT55, NTG-1 and NTG-2 microphones on a video camera.
Rode WS3 windshield for the Rode NT3.
Rode WS4 windshield for the Rode NT4 microphone.
Rode WS5 windshield for the Rode NT5, NT55 and NT6 microphones.
The Rode WS7 windshield keeps wind noise out of your NTG3 shotgun microphone when you are recording out of doors. Ideal if you are often recording outside.
The NT45-O is a interchangeable omni capsule for the NT5, NT55 and NT6 microphones. Its omnidirectional pickup pattern is designed for equal sensitivity at all sides of the capsule, to allow for the recording of more 'room'.
The NT45-C is a interchangeable cardioid capsule for the NT5, NT55 and NT6 microphones. Its cardioid pickup pattern is designed to pick up sound at the front of the microphone.
The GN1 is a miniature gooseneck microphone stand for the Rode NT6.
This set contains eight elastic bands for the Rode Stereo VideoMic.
The RM2 is a low-profile professional stand mount for the models including the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphones.
The Rode WS14 pop filter has been purpose-designed for the Rode PodMic and PodMic USB and counters the noise caused by plosives like Ps and Fs.
Everyone knows you can't just plug a lavalier or headset microphone into the XLR mic input of a mixer or audio interface and expect it to work. First, you need the Rode VXLR Pro: a stereo mini-jack to XLR adapter with built-in phantom power conversion.
With the Rode COLORS colour coding set, you keep track of your NT USB Mini usb microphones. With this set, you can colour-code both the microphone and the cable so you can see at a glance which microphone belongs to which channel.
The Rode MicDrop is a weight to attach to a lavalier cable. This makes the end with the plug fall down under clothing, and you have somewhat less precarious situations.
The Rode WS9 wind cap protects your Videomicro or Videomic ME from the wind. Fortunately, your camera microphone doesn't always have to go through life as a grey mouse; this version is bright pink!
The Rode WS9 wind cap protects your Videomicro or Videomic ME from the wind. Fortunately, your camera microphone doesn't always have to go through life as a grey mouse; this version is bright orange!
Slotted over the Rode Videomicro or Videomic ME microphone, the Rode WS9 windshield efficiently counters wind noise, resulting in clean recordings - even on outdoor locations.
The Rode WS9 wind cap protects your Videomicro or Videomic ME from the wind. Fortunately, your camera microphone doesn't always have to go through life as a grey mouse; this version is bright blue!
With the complete Rode Colors 2 Colour-Coding Pack, you can colour code the Wireless Go clip-on microphone system and always know exactly which transmitter is linked to which receiver.
This set of two Rode WS-Chroma windshields have been colour-coded in blue and green and designed to fit the Rode VideoMic NTG. Use one of these windshields in front of a green or blue screen to easily remove them from the shot later.
Make sure you always have the right clip to secure your Rode Wireless Go microphones with the FlexClip Go pack. Includes a MagClip Go, CrossClip and Vampire Clip.
Do you already own a Wireless Micro transmitter, and are actually looking for a nice reporter microphone? With this RØDE Interview Micro adapter, you can put that transmitter in the holder, put the plop cap on it, and you're done!
Do you already own a Wireless Micro transmitter, and are actually looking for a nice reporter microphone? With this RØDE Interview Micro adaptor, you can put that transmitter in the holder, pop cap on, and done!
If you do want to invest in the Wireless Go Gen 3 wireless tie-pick microphone, do yourself a favour, and pick up this Charging Case+ as well. A handy case for charging your Wireless Go III system.
The Røde Dead Kitten wind shield is specifically designed for the iXY, Stereo VideoMic and NT4 microphones. It minimises ambient noise in extremely windy situations.
This versatile mounting adapter from RØDE provides precise, stable positioning for microphones, cameras and accessories up to 2 kg.
Filters
Filters