The Rode VXLR+ phantom power adapter is an ideal addition for products like the VideoMic. It converts XLR to mini jack and 12 - 48-volt phantom power to 3 - 5-volt plug-in power.
The Rode WS11 Windshield has been exclusively designed to fit the VideoMic NTG camera microphone and has been made from faux-fur, making it far more effective than standard foam.
The Rode Magclip GO offers you an ingenuous way to attach and hide your Wireless GO lavalier microphone behind your lapels. All that remains visible is a sleek, clean-looking magnet.
Specifically designed for Røde's popular VideoMic Pro+, the DeadCat VMP+ is a highly effective, easy-to-install windshield.
The Rode SM3-R is equipped with an improved suspension, compared to its predecessor, the Rycote Lyre, which prevents vibrations and contract sounds from disrupting your audio.
The Rode SM4-R suspension shock mount has dual Rycote Lyre mounts so you can position your microphone to perfection on a boom pole or mic stand.
Rode's PG2-R is a pistol grip shock mount designed to keep contact sound and unwanted vibrations to a minimum. It's fitted with the Rycote Lyre shock mount system.
The DeadCat VMPR windshield by Rode enables you to make even better, cleaner audio recordings with your Videomic Pro Rycote.
The RM3 microphone holder is specifically designed for the various Rode microphones. It can be used for the M2, M3, NT3 and NT4.
The RM5 can be used as a microphone holder for the NT5, NT55, NT6, NTG1, NTG2 and NTG3 by Rode.
These replacement bands can be used for the VideoMic Pro shotgun microphone. The elastic bands come in a set of 4.
From now on can easily clip on your Rode Lavalier or HS1B. This is an indispensable accessory for every headset microphone user!
With this lavalier clip, your lavalier microphone can be discreetly fastened to your clothing - a highly practical accessory for any Rode Lavalier tie-clip microphone user!
Do you ever make outdoor recordings under difficult circumstances? In that case, you should use this Rode WS8 Deluxe Windshield to prevent wind noise from being picked up.
The Rode Stereo Bar lets you create wonderful stereo recordings in an XY or ORTF setup. Thanks to the groove in the middle, you can adjust the distance between the microphones, with a maximum distance of 20 cm.
It is extremely durable and worthy of expensive microphones: the Rode SMR shockmount. Made of a military-grade polymer and a double Rycote Lyre system ensures adequate attenuation. Includes metal pop filter.
The Pivot Adaptor by Rode is a practical adapter that allows you to attune the angle of your microphone clip re the stand. Thanks to the accessory screw thread adapter, the Rode Adaptor fits on nearly any stand.
Rode SM2 shock Mount for the Rode NT2A, NTK, K2, NT1000, NT2000 and the Classic 2.
The PSM1 is a shockmount for the Rode Procaster and the Podcaster.
The WS6 windshield is fit for the Rode NTG1 and NTG2 microphones. Thanks to the thick filling, the WS6 is fit for use in windy situations - it ensures that you are intelligible by keeping wind noise out.
The Rode WSVM is used when your recording environment only suffers from a little bit of wind. It is also used to suppress loud sounds in speech.
The Røde Dead Kitten wind shield is specifically designed for the iXY, Stereo VideoMic and NT4 microphones. It minimises ambient noise in extremely windy situations.
Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.
The RM2 is a low-profile professional stand mount for the models including the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphones.
If you are creating recordings with your Rode Blimp microphone, you need as transparent a sound as possible. The Rode Dead Wombat keeps wind out of your recordings.
The Rode WS14 pop filter has been purpose-designed for the Rode PodMic and PodMic USB and counters the noise that comes with plosives like Ps and Fs.
The Rode WS14 pop filter has been purpose-designed for the Rode PodMic and PodMic USB and counters the noise caused by plosives like Ps and Fs.
The Rode WS14 pop filter has been exclusively designed to fit both the Rode PodMic and PodMic USB. Slot it over the grille, counter vocal plosives like 'P' and 'F' and gain clean sound.
With the complete Rode Colors 3 Colour-Coding Pack, you can colour code the Wireless Go II and Lavalier II systems and always know exactly which transmitter is linked to which receiver.
While the foam windshield that came included with your Rode VideoMic Go II will protect your recordings from a light breeze, if you're working outdoors on location, you'll definitely need something more hefty, like the made-to-measure WS12.
The Rode Interview GO handle turns the separately available Wireless Go tie-pin microphone into a handheld microphone. Ideal for interviews. Includes foam windshield.
Everyone knows you can't just plug a lavalier or headset microphone into the XLR mic input of a mixer or audio interface and expect it to work. First, you need the Rode VXLR Pro: a stereo mini-jack to XLR adapter with built-in phantom power conversion.
Use the Rode Interview GO hand grip to turn your Wireless Go lavalier into a handheld microphone and get it ready for interviews! Foam-rubber wind shield included.
Rode WS2 windscreen for the Rode K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Procaster and Broadcaster.
The Rode replacement mounting ring is compatible with the NT-USB microphone.
Do you already own a Wireless Micro transmitter, and are actually looking for a nice reporter microphone? With this RØDE Interview Micro adapter, you can put that transmitter in the holder, put the plop cap on it, and you're done!
The RM1 is a practical microphone holder that's compatible with a fair number of Rode mics.
The Rode Thread Adapter actually combines three screw thread adapters into one. Fit it to your camera bag or key ring via the carabiner clip and you'll never have to deal with thread-incompatibility issues again.
Filters
Filters