Replacement kit for the Shure CVL-B/C-TQG lavalier microphone, including clip and foam windshields.
Using the Neumann KVG 130 nx, you can extend the placement of a microphone capsule from Neumann's KK nx series by 30 centimetres. The swivel end of this extension can be adjusted up to 110 degrees.
With the Audix SMT1218R, you mount the Audix ADX12 or ADX18 gooseneck microphones on the tabletop for permanent installations!
These four elastic bands are vital to your Shure shock mount. These replacement O Rings will restore your shock mount's absorbing capabilities.
With the Shure RPM40PC, it is possible to simply adjust the frequency response of your Shure TwinPlex microphone such that your voice has more presence in recordings and in sound reinforcement.
To mount a single Shure TwinPlex TL microphone, you can use this Shure Magnet Mount set. This set consists of 2 pieces.
The Shure RPM40SM consists of 3 transparent Sticky Mounts, including adhesive. These allow you to mount your Shure TwinPlex tie-pin microphone anywhere you want!
The Shure RPM40KIT is a handy, all-in-one accessory kit for your Shure TwinPlex TL microphones. This kit comes with frequency caps, clamps, mounts, windshields, stickers and a storage bag!
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53B headset microphones. This is a set consisting of 3 of these parts.
If the frame of your precious Shure TwinPlex TH53 headset has become damaged, you can replace it with the RPM53-HF frame. This frame is available in three colour options for the perfect fit!
When the rod arm of your Shure TwinPlex TH53 headset microphone is damaged, of course you don't buy a completely new headset! Replace this rod arm with the RPM53/O spare part.
The Shure RPM50ES will make wearing your Shure TH53 headset just that little bit more comfortable. This is a set of Sleeves that you can slide around the ear hooks of your headset.
The Sennheiser MAS 1 is a robust microphone button that you can use in combination with the Sennheiser MAS 133 switch box for microphones! This button switches between different modes for your XLR microphone.
Easily add an extra 4cm of height to your microphone using the Neumann STV 4 Stand Extension. This widget is simply screwed in between the tabletop stand and microphone clip.
Looking for the flattest possible microphone response for your Shure TwinPlex TH45, 46, 47 or TH53 tie and head microphone(s)? With the Shure RPM40FC, you have a handy set of 10 Flat Caps suitable for this purpose.
If the elastic bands of your A4SM shock mount have too much slack and no longer guarantee vibration-free suspension, then it's time to replace them with a set of fresh ones. That's where the Shure A4EB elastic bands come in.
In-line mute switch for easy muting of 2 bodypack transmitters.
Repair your Shure KSM series shockmount with this set of elastic straps. It contains 8 silicone straps.
