Need a new belt clip for your Shure RPM400 preamp? Just grab this official replacement clip.
Replacement kit with clip and 2 foam wind screens for the PGA31 headset microphone.
Looking for a means to attach your Shure RPM400 preamp to something other than your belt? The SHure RPM40PREMNT lets you attach this preamp wherever you want!
In-line mute switch for easy muting of 2 bodypack transmitters.
Replacement kit for the Shure CVL-B/C-TQG lavalier microphone, including clip and foam windshields.
Repair your Shure KSM series shockmount with this set of elastic straps. It contains 8 silicone straps.
Looking for the flattest possible microphone response for your Shure TwinPlex TH45, 46, 47 or TH53 tie and head microphone(s)? With the Shure RPM40FC, you have a handy set of 10 Flat Caps suitable for this purpose.
The Shure RPM40KIT is a handy, all-in-one accessory kit for your Shure TwinPlex TL microphones. This kit comes with frequency caps, clamps, mounts, windshields, stickers and a storage bag!
To mount a single Shure TwinPlex TL microphone, you can use this Shure Magnet Mount set. This set consists of 2 pieces.
With the Shure RPM40PC, it is possible to simply adjust the frequency response of your Shure TwinPlex microphone such that your voice has more presence in recordings and in sound reinforcement.
The Shure RPM40SM consists of 3 transparent Sticky Mounts, including adhesive. These allow you to mount your Shure TwinPlex tie-pin microphone anywhere you want!
The Shure RPM40TS gives you extra stickers for your Sticky Mounts! These double-sided sticky mounts are available in sets of 15, and sets of 50.
Ran out of adhesive stickers for your Sticky Mounts? Grab the Shure RPM40TS pack and replenish your stock with 50 fresh, double-sided adhesives.
The Shure RPM50ES will make wearing your Shure TH53 headset just that little bit more comfortable. This is a set of Sleeves that you can slide around the ear hooks of your headset.
When the rod arm of your Shure TwinPlex TH53 headset microphone is damaged, of course you don't buy a completely new headset! Replace this rod arm with the RPM53/O spare part.
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53B headset microphones. This is a set consisting of 3 of these parts.
If the frame of your precious Shure TwinPlex TH53 headset has become damaged, you can replace it with the RPM53-HF frame. This frame is available in three colour options for the perfect fit!
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53C headset microphones. This is a set consisting of 3 of these parts.
The Shure RPM53-CF refers to the Cable Flex part of the Shure TwinPlex TH53T headset microphones. This is a set consisting of 3 of these parts.
This practical, nifty solution is perfect for performers that miss a mute button on their wireless microphone. Simply unscrew the head and place the UAMS between it and the body.
These four elastic bands are vital to your Shure shock mount. These replacement O Rings will restore your shock mount's absorbing capabilities.
Perfectly formed for the Shure SLXD5 Receiver, the Shure WA301 Splash-proof Cover protects against bumps and knocks as well as light showers, no matter where you're shooting.
If the elastic bands of your A4SM shock mount have too much slack and no longer guarantee vibration-free suspension, then it's time to replace them with a set of fresh ones. That's where the Shure A4EB elastic bands come in.
Filters
Filters