A mic stand and a microphone are useless without a decent microphone clip. Use Shure's A25D, for instance, to securely mount one on the other, and you'll have your hands free during your gigs.
Shure's wireless handheld transmitters have a slightly larger diameter than regular microphones, which is why Shure designed the WA371 microphone clip. It securely mounts your handheld microphone on any standard mic stand.
The Shure RK187T2-B Clip has been designed to fit all Shure WL18XM Series clip-on lavalier microphone, comes in black and has space for two microphones.
The Shure RK187T1-B clip has been designed to fit all Shure WL18XM Series lavalier microphones, comes in black and ties down a single clip-on mic.
The Shure AMVL-CLIP can be used to replace the tie clip that comes with the Shure MVL lavalier microphone as standard - just in case it gets lost or you're in need of a spare.
The Shure RK187T1-W clip has been designed to fit all Shure WL18XM Series lavalier microphones, comes in white and ties down a single clip-on mic.
Do you own a Shure PG81, SM81, VP64A, VP64AL, SM63L or SM63LB microphone? With the A57F microphone clip, you can mount it on virtually any mic stand!
The Shure A53M shock mount microphone clip allows you to mount your SM81, SM94, VP64, KSM137 of KSM141 to a stand while keeping unwanted noise at bay!
Shure's WH10 and WH20 lavalier microphones are often used outside, where the RK318WS windshield will keep wind and breath noise from affecting your sound!
Even a small unwanted bit of noise can ruin a recording, and shocks and vibrations are often the main culprit. Luckily, the Shure A55M shock mount prevents those vibrations from reaching the mic and polluting the signal!
The universal Shure A25E microphone clip is fully compatible with any microphone with a 25 to 30mm shaft diameter, making it the ideal for models like the Shure KSM9, KSM9HS and KSM8.
The Shure RK187T2-W Clip has been designed to fit all Shure WL18XM Series clip-on lavalier microphone, comes in white and has space for two microphones.
With the Shure A4M microphone mount, you can mount your SM4 condenser microphone on a microphone stand. Thread adapter included.
To attach two Shure TwinPlex TL40 or similar lavaliers to your lapel, use the Shure RPM40TC Dual tie pin clamps. This is a set consisting of three clamps.
Do you want to quickly attach the SM93 or WL93 lavalier microphone securely to your clothing? No problem with the RK645SB tie clip.
This Shure swivel mount allows you to securely mount your KSM27 or KSM32 microphone to a stand.
Sure, you can use rolls of gaffa tape to fit your Shure KSM44 on a microphone stand, but we recommend a more practical solution: the A44M stand adapter!
This set combines a colour T windscreen and colour-T tie clip, allowing you to fasten your SM93 or WL93 lavalier microphone discretely to your clothes.
The Shure AMV-PC accessory kit for MV88+ includes a microphone clamp and telephone clamp. These accessories come standard with the MV88+ Video Kit and serve as a spare part.
The Shure RPM40SO is a kit consisting of 10 Standoffs for RPM40(S)TC Dual and Single tie pin clips. This kit is suitable for all TL40 lavalier microphones.
To clamp a single Shure TwinPlex TL40 tie-piping microphone, use a Shure RPM40STC tie-piping clamp. This is a set consisting of three tie pin clamps.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of three tie pin clamps.
You can use Shure's Vampire Sticky Mounts to attach your TwinPlex TL40 or similar tie-pin microphones. This is a set of 3 Vampire Sticky Mounts.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of four tie pin clamps in four different colours.
The Shure RPM40VM Vampire Mounts are named after the unique way you can attach them to your clothing by the two sharp pins. This is a set of 3, suitable for a variety of tie-pin microphones!
The Shure RPM53-CC is a spare part for Shure TwinPlex TH53 headset microphones.
Got two compatible Shure-made microphones? Secure them both to a single stand using the A26M dual microphone clamp with 5/8" thread! Compatible with the Shure SM57, Beta 57a, and 545 Series microphones.
The Shure A300M ShureLock is a rugged microphone mount with thread lock designed for the KSM313 and KSM353 ribbon microphones.
The Shure A44AM allows you to mount a Shure KSM44A condenser microphone on a conventional microphone stand. Increase the versatility of the high-quality KSM44A with this stand connection.
The Shure MoveMic Magnetic Mount offers an alternative mounting method for your MoveMic microphone. Instead of a peg, the Magnetic Mount uses a metal plate and a magnet.
Easily secure a Shure SLXD5 receiver to a camera with the Shure WA311 Cold Shoe Adapter.
Holds 2 Shure microphones with tapered handles side by side.
Compatible with Shure TwinPlex TL40 lavalier microphones, the Shure RPM40STC tie clip provides a neat and efficient solution when it comes to discretely miking up the presenter and guests. This pack includes three clips.
Filters
Filters