Just in case they get worn out or go missing, the Shure RK379 microphone clip and windshield pack is compatible with the Shure SM31FH Fitness microphone headset.
The Shure A58WS microphone windscreen eliminates wind and breath noise without affecting overall sound quality. It's suited for ball-type mics, such as the Shure SM58, Beta 58A, etcetera.
The Shure A2WS microphone windshield keeps unwanted noise caused by breath or wind at bay. It also features a locking system that will keep it firmly in place!
The Shure A58WS microphone windshield reduces wind and breath noise, and it's suited for ball-type mics such as the Shure SM58 and Beta 58A. Check it out!
The Shure MoveMic AMV-LAV-WS/W-KIT includes a set of windshields and matching clip covers for Shure's MoveMic wireless lavalier microphone system.
Are you tired of noise ruining your recordings or broadcasts? The RK345 takes care of wind and breath noise, leaving you with a clear recording.
The Shure A81WS windscreen prevents your end address microphone from picking up anything it shouldn't, protecting your recordings and preventing them from being polluted by wind noise.
Shure developed this practical windshield to keep wind and breath noise from ruining your recordings. This model will help keep your SM57 or 545 series microphone's audio signal crystal-clear!
In the world of (live) sound recording, there are few things as annoying as breath and wind noise being picked up by your mic. Luckily, there's a simple solution: a microphone windshield such as this Shure A3WS will help!
To keep your recordings free of breath and wind noise, equip your mic with the Shure RK183WS windscreen! It's suitable for Beta 98, MX183, MX184, MX185, MX202, WH30, WL183, WL184 and WL185 microphones.
The Shure A58WS microphone windshield eliminates wind and breath noise without affecting overall sound quality. It's suited for ball-type mics, such as the Shure SM58, Beta 58A etcetera.
Shure microphones need to be properly protected against unwanted noise, and the Shure A85WS windshield does just that. It's suited for Shure Beta 87A/C, SM87A, SM86, SM85 and BG5.1 microphones.
Shure's WH10 and WH20 lavalier microphones are often used outside, where the RK318WS windshield will keep wind and breath noise from affecting your sound!
The Shure AP98WS Windscreen has been made specially to fit the Shure PGA98H and PGA98D instrument condenser microphones, keeping the sound clean of wind noise.
For outdoor use of the Shure TwinPlex tie-pin microphones, a professional windjammer is definitely recommended. In cooperation with Rycote, Shure therefore offers this Mini Windjammer set, with 2 windshields!
The Shure AMV7+WS is a windshield for the Shure Motiv MV7+ hybrid broadcast microphone.
To protect your SM7B, SM7A or SM7's recordings from pops and taps caused by the wind or your breath, Shure developed the A7WS windshield to suppress that unwanted noise without affecting the quality of the overall sound.
Black windshield to replace the Shure SM7dB microphone.
Designed to fit the Shure MVL clip-on microphone, the Rycote AMVL-FUR Mini Windjammer supports outdoor recordings, so you can keep the sound clean and clear of wind noise.
The Shure MoveMic AMV-LAV-WS/B set includes two black windshields for Shure's MoveMic wireless clip-on microphone.
Looking for additional or new windshields for your Shure TwinPlex TH or TL microphones? These Shure RPM40WS see fit for this purpose and available for every colour variation! This is a set of 5.
End the explosive character of plosives! This Shure RK184WS windscreen for the SM1, SM2, SM10, SM12 and SM14 allows you to record a speaker or vocalist completely cleanly.
Windscreen for the Shure SM81 microphone. Reduces breathing and wind noise.
The Shure RK187WS-W is a white wind cap for Shure WL18Xm lavaliers, which reduces breathing and wind noise.
Need a new windshield for your Shure Motiv MV6? This is the official replacement windshield.
This Shure microphone windshield works to reduce unwanted noise caused by breath and wind. With its acoustically transparent material, it will keep out the wind and any harmful plosives, without reducing sound quality.
The Shure A32WS microphone windshield reduces unwanted noise caused by breath and wind, while still allowing you to enjoy the full sound quality that your KSM27/KSM32/KSM44 microphone has to offer!
This microphone windshield, designed for the Shure Beta 57A microphone, is quite unique. It's made of acoustically transparent material that protects sound quality while filtering out unwanted breath and wind noise.
This windshield makes your Microflex microphone better suited for use outdoors, as it keeps out breath and wind noise, keeping your signal crystal-clear.
Wind and breath noise don't belong in a clear recording or amplification that is made with a Shure MX/WL180 series microphone! Which is why Shure offer these microphone windscreens!
This set combines a colour T windscreen and colour-T tie clip, allowing you to fasten your SM93 or WL93 lavalier microphone discretely to your clothes.
Shure's WL93 lavalier microphones are often used outside, where the RK355WS windshield will keep wind and breath noise from affecting your sound!
Looking for additional or new windshields for your Shure TwinPlex TH or TL microphones? These Shure RPM40WS see fit for this purpose and available for every colour variation! This is a colourful set of 8.
The Shure AMV88-WS is a windshield that comes standard with the Shure Motiv MV88 microphone. It is therefore a spare part.
The Shure AMVL-WS windshield counters unwanted breath and wind noises. While it comes complete with the Shure MVL clip-on microphone as standard but can be picked up on the side as a spare or replacement.
Are the standard windshields supplied with the Shure CVO overhead installation microphones worn out or lost? You can replace these with the Shure ACVO4WS windshields! These are supplied per 4.
Are the windshields supplied as standard with the Shure CVO overhead installation microphones worn out or lost? You can replace these with the Shure ACVO4WS windshields! These are supplied per 4.
This microphone windshield is made of high-quality materials and features a synthetic fur cover. It reduces wind noise by up to 25 dB!
This practical accessory for your Beta 181, can come in handy at any time! It counters loud popping noises that are caused because the wind is blowing or someone is overarticulating their P's and is suited for the Shure Beta 181 series.
Whatever the weather might be, you can always get to work with the Shure VP89M, so long as you use this A89MW-SFT Softie. This deadcat attenuates wind noise and is highly durable. Ready for professional use.
The Shure A89LW-SFT Softie is a deadcat windscreen for use with the Shure VP89L shotgun microphone. It is made of solid materials, for professional durability and dampens wind noises with up to 25 dB.
For extra dampening of wind noises you should go for the Shure A89SW-JMR. This synthetic windjammer can be used with the VP89S and VP82 shotgun microphones and reduces up to 10 dB of annoying wind noises.
The Shure A89MW-JMR is a windjammer with the characteristic deadcat look. It is made of fake fur and ensures an attenuation of about 10 dB for the Shure VP89M shotgun microphone.
The Shure A89LW-JMR is a professional windjammer for the VP89L shotgun microphone. Wind noise is attenuated by 10 dB. It is made in collaboration with Rycote and consists of fake fur.
Filters
Filters