LD Systems ANNY 10 BPH 2 B5 Accu PA speaker with wireless headsets (584 - 608 MHz)

Product specifications

• Scope of delivery: 1x ANNY 10, 2x receiver, 2x bodypack, 2x headset
• wireless frequencies (set): 584 - 608 MHz
• beam angle: hor.: 120° / vert.: 60°
• Colour: black
• weight (set): 18.53 kg
• type (speaker): active
• peak output power (speaker): 160 W
• rms output power (speaker): 80 W
• amplifier class (speaker): class D
• max. spl peak (sine burst, fullspace/1 m, THD≤10 %) (speaker): 118 dB
• max. spl average (sine burst, BW, fullspace/1 m, THD≤10 %) (speaker): 111 dB
• frequency response (-10 dB, rel. avg) (speaker): 45 - 20,000 Hz
• crossover frequency (speaker): 1800 Hz
• beam angle (speaker): hor.: 120° / vert.: 60°
• number of inputs (speaker): 5
• input connector types (speaker): 3.5 mm jack TRS female
• number of outputs (speaker): 1
• output connector types (speaker): XLR 3-pole male
• protection (speaker): short circuit, overheating
• colour (speaker): black
• bluetooth® version (speaker): bluetooth® 5.0
• bluetooth® features (speaker): audio streaming (A2DP), TrueWireless™ stereo
• bluetooth® range (speaker): ≤10 m (class 2)
• supported audio codecs (speaker): SBC, AAC
• receiver (client) (speaker): yes
• number of mic/line inputs (speaker): 2
• mic/line-in connector type (speaker): XLR combo socket
• number of line inputs (speaker): 2
• line-in connector type (speaker): RCA female
• number of music inputs (speaker): 1
• music input connector type (speaker): 3.5 mm jack TRS female
• output signal type (speaker): balanced
• number of line outputs (speaker): 1
• line out connector type (speaker): XLR 3-pole male
• mixer (speaker): yes
• audio processing (speaker): 3 band EQ (high, mid, low), delay line, presets
• woofer size (speaker): 10"
• woofer outer diameter (speaker): 254 mm
• woofer magnet (speaker): ferrite
• woofer voice coil (speaker): 2"
• tweeter driver size (speaker): 1"
• tweeter magnet (speaker): ferrite
• tweeter voice coil (speaker): 1 mm
• power supply (speaker): 100 V AC - 240 V AC / 50 - 60 Hz
• power supply type (speaker): switched-mode power supply (SMPS)
• rated power (speaker): 150 W
• mains connection (speaker): IEC C14 plug male
• fuse (speaker): T2AL/250 V
• battery cell technology (speaker): lead-acid
• exchangeable battery (speaker): yes
• operating voltage (battery) (speaker): 12 V
• battery capacity (speaker): 5,000 mAh
• battery life (speaker): 5 h (MUSIC) - 25 h (ECO)
• charging time 100% (speaker): 7 h
• charging time 80% (speaker): 3.5 h
• design (speaker): bass reflex
• number of handles (speaker): 3
• flange (speaker): 36 mm (0°/5°)
• cabinet material (speaker): polypropylene
• front grille material (speaker): aluminium
• ambient temperature (speaker): 0 - 40 °C
• maximum humidity (non-condensing) (speaker): 80%
• width (speaker): 361 mm
• height (speaker): 566 mm
• depth (speaker): 300 mm
• weight (speaker): 18 kg
• accessories included (speaker): mains cable
• receiver module: LD Systems ANNY® R B5 receiver module for ANNY®
• material (receiver module): steel sheet
• coating (receiver module): powder coated
• wireless frequencies (receiver module): 584 - 608 MHz
• frequency response (-3 dB, rel. avg) (receiver module): 50 - 17,000 Hz
• colour (receiver module): black
• channels (receiver module): 12
• antenna connector (receiver module): BNC female
• antennas (receiver module): BNC female
• width (receiver module): 72.8 mm
• height (receiver module): 39.6 mm
• depth (receiver module): 118.5 mm
• weight (receiver module): 8 g
• headset microphone: LD Systems WS 100 MH 1 headset microphone, black
• directivity (headset): cardioid
• capsule type (headset): condenser
• nominal impedance (headset): 680 Ω
• sensitivity (transfer factor) (headset): 6.31 mV/Pa
• phantom power (headset): 5 V
• output connector type (headset): mini XLR female
• cable length (headset): 1 m
• material (headset): ABS
• frequency response (-6 dB, rel. avg) (headset): 100 - 12,000 Hz
• colour (headset): black
• weight (headset): 49 g
• bodypack transmitter: LD Systems ANNY® BP B5 bodypack transmitter for ANNY®
• wireless frequencies (bodypack): 584 - 608 MHz
• frequency response (-3 dB, rel. avg) (bodypack): 45 - 20,000 Hz
• colour (bodypack): black
• channels (bodypack): 12
• transmission power (bodypack): 10 mW
• antennas (bodypack): 1 (fixed)
• input connector types (bodypack): mini XLR male
• min. signal-to-noise ratio (SNR) (bodypack): 100 dB
• batteries (bodypack): 2 x 1.5 V AA/LR6 @ max.8 h
• width (bodypack): 64 mm
• height (bodypack): 100 mm
• depth (bodypack): 21 mm
• weight (bodypack): 9 g