Based on more than 21,240 customer reviews

JB systems Vibe 10-15S promo pack speaker set

Discontinued, this product can no longer be ordered.

No alternatives found
JB systems Vibe 10-15S promo pack speaker set
Product no: W-70154

Product information

General

This is the ideal speaker set for more serious applications. You will often find this system in the inventory of artists and entertainers. The Vibe 10 satellite speaker allows for sparkling highs and clear middle tones thanks to the combination of a sturdy tweeter and a 10-inch woofer, the lows are taken care of by the 15-inch subwoofers from the Vibe series - the Vibe 15S.

This is quite a complete set in itself, but JB Systems add some more by including the amps, cabling and distance rods for satellite speakers.

The C3-1800 amp amplifies the entire set and has a power of 2x 450 watts RMS for the satellite speakers and 1x 900 watts for the subwoofers. This way, the set is driven in a balanced way by a sizeable amp and you can create a full and warm sound that fills the whole venue with the right sounds.

The robust exterior of the renewed Vibe family looks great and is functional too! Foam behind the grille keeps certain components safe from transport damage and keeps the grille in place and the cabinets feature neat splash lacquer, which prevents scratches! Even during intensive use, your set will look great!

JB systems C3 1800 amplifier This product comes with a 3-year warranty.

Devine SPE15/5 5-Metre Speaker Cable, 2x1.5mm This product comes with a manufacturing defects warranty.

JB systems Vibe 10 MKII speaker cabinet 200 W This product comes with a 3-year warranty.

JB systems Vibe 15SUB MKII subwoofer 400W This product comes with a 3-year warranty.

Innox IVA07 35mm Distance Rod This product comes with a 3-year warranty.

Specifications

JB systems C3 1800 amplifier
1x JB systems C3 1800 amplifier
Durable 3-channel amplifier (2x 450 W @ 4 ohms for satellite speakers, 1x 900 W @ 4 ohms mono for subwoofers) with built-in crossover. Finally we can enjoy an amp series whereby you can use one single amp to power a complete sound set!

Product features

19-inch rack size
2U
2-ohm compatible
No
Number of amplifier channels
Other
Audio loop output
No
Bridge mode
No
Input
Jack (6.3 mm), XLR
Built-in filter
HPF
Built-in protection
Clip indicator
Built-in DSP processor
No
Cooling
Ventilator
RMS power (4 ohms) per channel
Not applicable
RMS power (at 8 Ohms) per channel
Not applicable
Amplifier class
AB
Amplifier output
Locking speaker connector
Equipped with crossover
Yes, variable

Weight and dimensions including packaging

Weight
25,0 kg
Dimensions
52,0 x 52,0 x 16,0 cm

Product specifications

  • can also be used as an ordinary 2-channel amplifier
  • 1,800W total RMS power:
  • satellite outputs (stereo): 2x 450 Wrms @ 4 Ω
  • subwoofer output (mono): 900 Wrms @ 4 Ω
  • very compact housing, only 2 U (88 mm) high
  • internal 24 dB/octave active crossover
  • 90 - 250 Hz setting of the crossover point
  • filter of the satellite outputs can be switched off
  • the internal subwoofer processor allows for powerful bass reproductions
  • limiters can be switched on/off
  • phase inversion switch for subwoofer
  • active crossover: 90 -250 Hz (24 dB/octave Linkwitz Riley)
  • input sensitivity: 770 mV
  • input impedance: 20 kΩ (bal) / 10kΩ (unbal)
  • S/R ratio >90dB
  • damping factor >500
  • cooling with fans
  • inputs: combined XLR/jack chassis, balanced/unbalanced
  • outputs: lockable speaker connectors
  • AC power: AC230 V / 50 Hz
  • dimensions (mm): 483 x 473 x 88 (19 inches/2 U)
  • weight: 24 kg
Devine SPE15/5 5-Metre Speaker Cable, 2x1.5mm
4x Devine SPE15/5 5-Metre Speaker Cable, 2x1.5mm
Chances are, you'll need a speaker cable sooner or later, so you might as well keep one or more handy in your cable case! Attractively-priced, the Devine SPE15/1.5 offers dependable, interference-free signal transfer.

Product features

Sustainable product
Not specified
Length
5.00 m
Male/female
Female - female
Audio connector
Lockable speaker connector 4p
Number of cores
2
Conductor diameter
1.5 mm2

Weight and dimensions including packaging

Weight
500 gr
Dimensions
24,0 x 20,0 x 4,5 cm

Product specifications

  • speaker cable
  • connector 1: locking speaker connector (4SPP)
  • connector 2: locking speaker connector (4SPP)
  • high signal quality
  • cable type: 2x 1.5 mm²
  • suitable for a power capacity of up to 500 watts (PA)
  • length: 5m
  • colour: black
JB systems Vibe 10 MKII speaker cabinet 200 W
2x JB systems Vibe 10 MKII speaker cabinet 200 W
The new Vibe series has been released! Improvements as well as new additions can be found in this series! Among the latter is this 10-inch satellite, which can be combined with the 15-inch sub!

Product features

Mid driver/woofer diameter
10 inches
Tweeter diameter
1.5 inches
Sustainable product
Not specified
Sensitivity
95 dB
Weight per speaker
15 kg
Installation speaker / 100 V
No
Speaker cabinet material
Wood
Maximum SPL
120 dB - 129 dB
Maximum frequency
20 - 20.9 kHz
Minimum frequency
60 - 79 Hz
Nominal impedance
8 ohms
Peak power in watts
350 - 499 watts
RMS capacity in watts
200 - 349 W
Set
No
Speaker connection
Locking speaker

Weight and dimensions including packaging

Weight
15,6 kg
Dimensions
57,0 x 39,0 x 36,0 cm

Product specifications

  • robust speaker cabinet
  • can be used as a monitor, satellite speaker or speech installation
  • fit for fixed and mobile applications
  • relatively compact and light construction
  • fitted with 1.5-inch tweeter and 10-inch woofer
  • solid MDG housing
  • scratchproof polyurethane paint layer
  • durable metal grille with acoustic foam, ensures a better look and additional protection
  • fitted with M10 rigging points
  • built-in 35mm stand adapter
  • specially designed fibreglass horn
  • features 2 Neutrik SpeakOn connectors
  • built-in flushed handles
  • with rubber feet
  • RMS capacity: 200 watts
  • maximum capacity: 400 watts
  • impedance: 8 ohms
  • frequency range: 65 to 20,000 Hz
  • dispersion angle: 100 x 70 degrees
  • sensitivity: 95 dB/w/m
  • maximum SPL: 120 dB
  • dimensions: 330 x 510 x 302 mm
  • weight: 15 kg
JB systems Vibe 15SUB MKII subwoofer 400W
2x JB systems Vibe 15SUB MKII subwoofer 400W
A 15-inch subwoofer was missing from the Vibe series. But, luckily, this is the case no longer! Ideally, you can make it active with the AVM-2 module.

Product features

6.3mm TRS connector
No
Mid driver/woofer diameter
15 inches
Wire terminals
No
Sustainable product
Not specified
Sensitivity
96 dB
Weight per speaker
35 kg
Speaker cabinet material
Wood
Maximum SPL
120 dB - 129 dB
Maximum subwoofer frequency
300 Hz
Minimum frequency
40 - 49 Hz
Nominal impedance
8 ohms
Peak power in watts
750 - 999 watts
RMS capacity in watts
350 - 499 W
Speaker connection
Wire terminal
Locking speaker connectors
Yes

Weight and dimensions including packaging

Weight
42,0 kg
Dimensions
66,0 x 65,0 x 47,0 cm

Product specifications

  • rugged subwoofer cabinet
  • made of MDF
  • features scratchproof paint layer
  • built-in M20 distance rod flange
  • high capacity 15-inch woofer with aluminium basket
  • built-in flushed handles
  • mounting points at the rear for wheels
  • with rubber feet
  • capacity: 400 W RMS, 800 W peak
  • input impedance: 8 ohms
  • sensitivity: 96 dB, 1 W/1 m
  • maximum SPL: 124 dB
  • frequency range: 40 - 300 Hz
  • dimensions: 440 x 595 x 605 mm
  • weight: 35 kg
Innox IVA07 35mm Distance Rod
2x Innox IVA07 35mm Distance Rod
With the reliable and height-adjustable IVA07 distance rod, you can simply and securely mount your satellite speaker on your subwoofer and find the optimal position. This distance rod has ben finished with a 35mm mounting point at both ends.

Product features

Sustainable product
Not specified
Speaker pole mount
35 mm
Height adjustable
Yes
Distance rod weight capacity
20 -29 kg
Set
No
Maximum height of stand
140 to 150 cm

Weight and dimensions including packaging

Weight
1,5 kg
Dimensions
83,5 x 9,3 x 9,0 cm

Product specifications

  • Innox distance rod
  • for mounting a satellite speaker onto a subwoofer
  • fitted with a 35mm screw thread at both ends
  • strong tightening knob
  • safety pin can be secured at multiple points
  • height adjustable: 94cm to 147cm
  • weight: 1.5kg
  • max.load: 25kg
  • colour: black
  • construction: steel
4.3
58 reviews

Rating

5 stars 35 4 stars 12 3 stars 6 2 stars 1 1 star 4
A review can no longer be written about this item
5 / 5

Innox IVA07 35mm Distance Rod

you would not think you could review much about a distance pole but these poles have fantastic build quality from the sturdy feel of them to the small details like the pin holder slot for when the pin is not in use ie when you are transporting them so the pin does not flop about and bash the pole of risk getting detached and lost.
 | 

Reviews from other countries

5 / 5

Innox IVA07 35mm Distance Rod

Voor het geld hoef je het niet te laten. Gewoon heel goed
 | 
This review was automatically translated from Dutch.
1 / 5

Innox IVA07 35mm Distance Rod

Degelijk materiaal maar de afmetingen waren niet correct. Ik kon deze gebruiken maar best wel checken.
 | 
This review was automatically translated from Dutch.
5 / 5

Innox IVA07 35mm Distance Rod

superhandige tussenpaal met schroefdraad. Het vertrouwen is er, kwalitatief materiaal en doet wat ie moet doen
 | 
This review was automatically translated from Dutch.
5 / 5

Innox IVA07 35mm Distance Rod

Deze inox tussenpalen gebruik ik bij mijn Electrovoice toppen. passen perfect zijn stabiel en zijn makkelijk op hoogte in te stellen. kortom een prima keus!
 | 
This review was automatically translated from Dutch.
4 / 5

Innox IVA07 35mm Distance Rod

Kijk, dit is een prima tussenpaal van 35mm voor te gebruiken bij niet te grote/zware speakers, dus meestal op hobby niveau. Voor deze prijs kan je geen professioneel materiaal verwachten. Is dit dan een slecht product? Helemaal niet! Dit is een zeer goed product, maar kijk waar je het voor gebruikt. Ik speel sporadisch nog eens op feestjes en voor mij is dit meer dan voldoende. Gemakkelijk om de hoogte in te stellen, beveiligd door een pin tegen het naar beneden zakken.
 | 
This review was automatically translated from Dutch.
5 / 5

Innox IVA07 35mm Distance Rod

Bonne bar de couplage prix très correct fait le travail je recommande je suis très satisfaits
 | 
This review was automatically translated from French.
5 / 5

Innox IVA07 35mm Distance Rod

Super rapport qualité/prix. A voir dans le temps...
 | 
This review was automatically translated from French.
5 / 5

Innox IVA07 35mm Distance Rod

Gewoon goed voor niet al te zwaar werk. Ik zou er zelf geen toppen op zetten die zwaarder zijn dan 22 kg.
Kunststof blokje op de schroefwartel zit idd niet vast zoals in eerdere review geschreven is. Maar als je hem niet uit mekaar haalt kan het lang aan. Prijs kwaliteit. Dat ze het kunnen maken voor dat geld.
 | 
This review was automatically translated from Dutch.
5 / 5

Innox IVA07 35mm Distance Rod

Aangekocht om Innox IVA SB 04 35mm adapter voor 2 speakers op te plaatsen. Stevig en sterk genoeg om deze 2 speakers te plaatsen en te dragen. Klein minpunt, bij plaatsing in de daar voorziene adapter op de subbass zat redelijk wat speling. Een beetje ducktape er omheen gedaan en hij zit nu stevig en vast. Aanrader voor deze prijs, moet niet onder doen voor de duurdere type's.
 | 
This review was automatically translated from Dutch.
Compare your gear (1/10)