Yamaha Stagepas 400i portable PA system
Snel en makkelijk op te stellen. Geen gedoe met versterkers etc... ca. 10' en we kunnen spelen.
De prijs was ook super!
Yamaha
Discontinued
This product can no longer be ordered
- compact, lightweight PA system
- consists of two speakers with built-in components and storage compartments
Mixer section:
- 8 channel (4x mono, 2x stereo)
- analogue inputs: 4x mono mic/line with 4x mono or 2x stereo
- digital inputs: USB audio IN, for iPod or iPhone
- channel EQ: 2-band with 8 kHz HIGH shelving and 100 Hz LOW shelving
- Hi-Z switch on channel 4
- stereo/mono switch on channels 5/6 and 7/8
- digital effects by means of SPX digital reverb module, with 4 reverb types and parameter control
- output processing by means of feedback suppressor and 1 knob Master EQ
- phantom power: +30 V on channels 1 and 2
- L + R speaker output by means of 6.35 mm jack
- monitor output by means of 6.35 mm jack (L/MONO + R)
- subwoofer output by means of 6.35 mm jack (MONO) with automatic HPF for the 400i speakers
- foot switch connector via 6.35 mm jack plug for reverb activation
Amplifier and speakers:
- redesigned speakers with 8 inch woofer and 1 inch tweeter
- maximum SPL: 125 dB SPL per speaker
- frequency range: 55 to 20,000 Hz
- two-way bass reflex speakers
- beam angle: 90 x 60 degrees
- floor monitor angle: 50 degrees
- 1 handle per speaker on the top
- 34.8 - 35.2 mm stand adapter with StageLok locking system
- amplifier module power capacity maximum: 400 W (200 + 200 W)
- amplifier module power capacity continuous: 360 W (180 + 180 W)
- power consumption: 30 Watt in standby mode, 70 W at 1/8 power consumption
- mains voltage: 100-240V AC, 50/60 Hz
- dimensions speaker: 289 x 472 x 275 mm
- dimensions mixer: 308 x 180 x 116 mm
- weight speaker: 7.5 kg
- weight mixer: 2.8 kg
- total weight: 17.8 kg
Channel connectors:
- channel 1/ 2: XLR, microphone or line
- channel 3/ 4: XLR, microphone or line; 6.35 mm jack, microphone or line
- channel 5/6: 6.35 mm jack or RCA
- channel 7/8: 6.35 mm jack, 3.5 mm jack or iPhone/iPod USB connectors
Included accessories:
- cover panel
- power cable (2 metres)
- 2x speaker cable (each 6 metres)
- 12x anti slip pads
- compact, lightweight PA system
- consists of two speakers with built-in components and storage compartments
Mixer section:
- 8 channel (4x mono, 2x stereo)
- analogue inputs: 4x mono mic/line with 4x mono or 2x stereo
- digital inputs: USB audio IN, for iPod or iPhone
- channel EQ: 2-band with 8 kHz HIGH shelving and 100 Hz LOW shelving
- Hi-Z switch on channel 4
- stereo/mono switch on channels 5/6 and 7/8
- digital effects by means of SPX digital reverb module, with 4 reverb types and parameter control
- output processing by means of feedback suppressor and 1 knob Master EQ
- phantom power: +30 V on channels 1 and 2
- L + R speaker output by means of 6.35 mm jack
- monitor output by means of 6.35 mm jack (L/MONO + R)
- subwoofer output by means of 6.35 mm jack (MONO) with automatic HPF for the 400i speakers
- foot switch connector via 6.35 mm jack plug for reverb activation
Amplifier and speakers:
- redesigned speakers with 8 inch woofer and 1 inch tweeter
- maximum SPL: 125 dB SPL per speaker
- frequency range: 55 to 20,000 Hz
- two-way bass reflex speakers
- beam angle: 90 x 60 degrees
- floor monitor angle: 50 degrees
- 1 handle per speaker on the top
- 34.8 - 35.2 mm stand adapter with StageLok locking system
- amplifier module power capacity maximum: 400 W (200 + 200 W)
- amplifier module power capacity continuous: 360 W (180 + 180 W)
- power consumption: 30 Watt in standby mode, 70 W at 1/8 power consumption
- mains voltage: 100-240V AC, 50/60 Hz
- dimensions speaker: 289 x 472 x 275 mm
- dimensions mixer: 308 x 180 x 116 mm
- weight speaker: 7.5 kg
- weight mixer: 2.8 kg
- total weight: 17.8 kg
Channel connectors:
- channel 1/ 2: XLR, microphone or line
- channel 3/ 4: XLR, microphone or line; 6.35 mm jack, microphone or line
- channel 5/6: 6.35 mm jack or RCA
- channel 7/8: 6.35 mm jack, 3.5 mm jack or iPhone/iPod USB connectors
Included accessories:
- cover panel
- power cable (2 metres)
- 2x speaker cable (each 6 metres)
- 12x anti slip pads
Product no: 9000-0005-1196
The Yamaha Stagepas systems are very popular among smaller bands and solo artists and are often used for presentations. These systems are accessible for everyone thanks to their simplicity in design. The 400i is the improved version of the Stagepas 300 and has more power, reliability, a higher sound quality and new gadgets including a USB connector for your iPod or iPhone. This system is ideal for modern artists who want to play MP3 files without any additional peripherals.
Technical details of the Stagepas 400i
The Stagepas 400i is one of the most compact systems on the market. The sound is produced by the essential speakers and the required power comes from a solid amplifier module of 2x 200 Watt (hence the name of the product). The (detachable) built-in mixer module employs Yamaha's years of PA mixer experience and digital inventiveness. You can complete your performance with the practical extras such as the built-in SPX reverb effects module and the iPod/iPhone USB connector. The feedback suppressor suppresses the familiar sounds created when someone doesn't use the microphone properly. This protects your system and makes it rental-proof.
Use and set up of the system
The Stagepas 400i can be set up very easily and is user-friendly, which makes it rather versatile. You can use it for smaller PA system applications or as a mobile background music system, due to its rugged construction. This way, the speakers will always remain representative. The speakers can be placed on a stand in order to distribute the high and middle tones among your audience. In addition, the mixer module has extra outputs for monitors and subwoofers. In a second you can create a solid PA system without any additional peripherals.
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.