These Gravity XSP 1028 keyboard stand sleeves come finished in bright green and keep your keyboard from shifting. This is a pack of 4.
If the safety pin of the Gravity SP 4722 is damaged or lost, replace it with the Gravity XSP 1369! This pin features a cord that allows you to attach the pin to the set screw.
The Gravity XSP 1061 is a set of optional spikes that you can attach to the underside of a Gravity monitor stand, such as the Gravity SP 3202. This prevents the tripod from sliding on slippery surfaces.
The Gravity XSP 1022 safety pin plus harness is compatible with Gravity speaker stands only.
The Gravity XSP 1030 is an M6x15 set screw, complete with ABS/TPE knob fitted with coloured ring. This is a spare part for Gravity guitar stands.
The Gravity XSP 1079 is a clamp that allows you to mount the Gravity LS TB 01 T-Bar to a standard 35 mm wide speaker stand. This is a spare part that comes standard with the main product.
The Gravity XSP 1012 is a rod arm swivel head spare part. Combined with the XSP 1014S rod arm hub, the XSP 1012 allows you to mount a rod arm on a Gravity microphone stand.
The Gravity XSP 1032 is a medium adjustment screw spare part suitable for Gravity music stands and microphone stands. This set screw has a plastic head and is fitted with a replaceable washer.
The Gravity XSP 1013S is a spare part for Gravity swing-arm microphone stands. It is a 1-point adjustable hub into which a swivel arm can be attached.
The Gravity XSP 1011 is a single rubber foot fitted with a replaceable green coloured ring. This is a spare part for Gravity microphone stands equipped with a tripod base.
The Gravity XSP 1080 refers to a set of spare parts that make up the support joint that couples the music sheet to the stand. This set comes complete with set screws, washers and other parts.
Lost the thread adapter that came with your Gravity MS QT 1 B Quick-Tilt Microphone Adapter? The Gravity XSP 1066 3/8-inch to 1/4-inch screw thread adapter sets you up with a new one.
Compatible with any Gravity microphone stand fitted with a boom arm, the replacement Gravity XSP 1014S Swivel Arm Hub has a two-point adjustment system so both the angle and length of the boom arm can be accurately set up.
Known for coming up with smart solutions, Gravity offer up the KS RD 1 Rapid Desk so you can convert your X-style keyboard stand into a desk for your laptop and DJ gear.
For the Gravity LS TBTV 28 light stand, the Gravity XSP 10011 is a spare part. This is the complete, upper clamp set including set screw, screws, washer and safety pin.
The Gravity WB 431 B is a base plate onto which you can mount up to 3 M20 tripods or intermediate poles. This is a wide, steel, stable mounting plate with a low profile and fabric-covered legs.
If the rubber base of a Gravity speaker stand is worn out or lost, you can replace it with the Gravity XSP 1020. This foot features a coloured ring.
The Gravity XSP 1003 quick-lock allows you to swiftly adjust the boom arm length of a Gravity microphone stand.
The Gravity XSP 1043 is a set of rubber washers that serve as a spare part for Gravity microphone stands with a 2-point rod arm system.
The Gravity XSP 1371 adjustment screw is part of the wind-up mechanism of the Gravity SP 4722 speaker stand as well as that of various similar stands. This replacement part comes fitted with a green ring.
The Gravity XSP 1001 is a spare part for Gravity microphone stands. The XSP 1001 is a microphone clamp and boom holder with a diameter of 16 millimetres.
The Gravity XSP 1004S is a spare part for Gravity microphone stands equipped with a tripod base. With this tripod base kit, you can replace a damaged tripod at an economical price!
The Gravity XSP 1010 replacement boom arm counterweight is compatible with various Gravity-designed boom arm microphone stands.
The Gravity XSP 1015 replaces the worn or broken collar of your Gravity speaker tripod. This collar concerns the coupling piece between the tripod's legs and the tripod.
The Gravity XSP 1017S is a spare part for a Gravity speaker stand, specifically a speaker leg brace set complete with bolt, nut and washer so you can easily replace a broken support.
With the Gravity XSP 1018, you have a spare part for Gravity speaker stands. The XSP 1080 concerns a plug that allows you to cover the tube of the stand.
The Gravity XSP 1021 is a spare part for Gravity speaker stands. This is a rubber ring that you can attach around the tube of the stand and which holds the safety pin.
The Gravity XSP 1024 is a set of 4 plugs that allow you to plug shut the support tubes of a Gravity keyboard stand. The XSP 1024 is compatible with 28-millimetre diameter tubes.
If your Gravity keyboard stand's rubber feet are worn out or lost, you can replace them with this Gravity XSP 1026 rubber foot. This is a single foot only.
The Gravity XSP 1033 is a spare part for Gravity speaker stands. You use this adjusting screw to adjust the height of the stand. The screw is fitted with a replaceable green-coloured washer.
With the Gravity XSP 1035, you have an M8 set screw that serves as a spare part for Gravity speaker stand adapters. The knob on the set screw is fitted with a green coloured ring.
The Gravity XSP 1037S is a spare part for Gravity speaker stands equipped with a tripod.
The Gravity XSP 1038 is a spare part for Gravity microphone stands with a round base. This base has a diameter of 27 centimetres and a weight of 3.6 kilograms.
With the Gravity XSP 1039, you have a spare part for Gravity microphone stands with a round base. This nut covers the attachment point between the stand's tube and the round base.
The Gravity XSP 1045 base plate end cap is a spare part for Gravity monitor stands.
The Gravity XSP 1046 is a threaded adapter that serves as a spare part for Gravity monitor stands.
The Gravity XSP 1047 is a screw set consisting of 4 screws that you use to secure the top plate of the Gravity SP 3202 studio monitor stand, among others. This is a spare part.
The Gravity XSP 1048 S upper clamp set is a spare part for Gravity speaker stands. This set comes with a set screw that features a green coloured ring.
The Gravity XSP 1049 is a set of two supports including screws. This is a set of spare parts for Gravity tripod speaker stands.
The Gravity XSP 1050 speaker stand base refers to a spare part for Gravity tripod speaker stands, such as the Gravity SP 5522 B.
The Gravity XSP 1051 is a cap set for the lower end of the main tube of a Gravity speaker stand, including screws and nuts for the tripod tubes. This is a spare part.
The Gravity XSP 1052 is a set consisting of two plastic plugs suitable for the guitar mounts on Gravity guitar stands, such as the Gravity Solo-G. This is a spare part for these stands.
The Gravity XSP 1053 is a spare part for Gravity guitar stands, such as the Gravity Solo-G. This is a rubber cap with pin, suitable for the main hinge on the guitar stand.
The Gravity XSP 1054 is a set of two protective, foam sleeves that allow you to protect the supports for a Gravity VARI-G guitar rack from bumps and scratches. This is a set of spare parts.
With the Gravity XSP 1055, you are provided with a set of spare parts suitable for Gravity VARI-G guitar racks. This is a set of long, protective foam sleeves for the brackets.
The Gravity XSP 1201 is a screw set that serves as a spare part of a Gravity NS ORC music stand. With this kit, you attach the blade mounting plates to the tripod.
The Gravity XSP 1358 is a set of two protective tubes for Gravity guitar stands, especially the GS 01 and similar models. You attach these tubes to the legs on which the guitar leans.
From the Gravity GS 01 NHB, this XSP-1360 spare part concerns the guitar clamp for the guitar stand.
