Fluid Audio Image 1 3-way studio monitor, white (each)
Fluid Audio
Specifications
Product features
- Sustainable product
- Not specified
- Active or passive
- Active
- Tweeter diameter
- Not specified
- Mid driver diameter
- 4 inch
- Woofer diameter
- 2 x 6.5 inch
- Coaxial
- No
- Monitor set configuration
- Single speaker
- Maximum frequency
- 20 - 20.9 kHz
- Minimum frequency
- 40 - 49 Hz
- RMS power in watts
- 350 - 499 W
- Speaker connections
- XLR input, digital input, digital output / thru
- Type of studio monitor
- 3-way (tweeter + midrange + woofer)
- Bass reflex system
- No bass reflex system
- Internal calibration
- No
Weight and dimensions including packaging
- Weight
- 11,5 kg
- Dimensions
- 42,0 x 33,0 x 30,0 cm
Product specifications
- Contents: 1x Fluid Audio Image 1 3-way studio monitor (white)
- Type: 3-way active monitor
- Max SPL: 108 dB
- Sensitivity: 87 dB @ 1 metre with -15 dBv input signal (level control set to 0 dB)
- Frequency response: ±4.6 dB 40 Hz – 20 kHz
- Frequency response: ±2.0 dB 80 Hz – 20 kHz
- Bass response: -3 dB @ 45 Hz
- Q: 0.707
- Slope: 24 dB/octave
- Crossover frequencies: 190 Hz / 3,000 Hz
- DSP: controlled by on-board DSP
- Enclosure: 14.5 litres total internal volume
- Enclosure: sealed woofer and midrange enclosures
- Tweeter: AMT (Air Motion Transformer)
- Tweeter dimensions: 66 x 66 x 27 mm
- Midrange: 4-inch aluminium cone
- Midrange: low-distortion motor with shorting ring
- Woofers: dual 6.5-inch paper cone woofers
- woofer excursion: +/-5.0 mm linear excursion
- amplifier power (treble): 75 W RMS
- Amplifier power (midrange): 100 W RMS
- Low-frequency amplifier power: 150 W x 2 RMS
- Total amplifier power: 475 W per monitor
- Controls: stepped input level attenuator
- Input impedance: 20 kΩ (balanced XLR)
- Signal processing: room correction file upload
- Signal processing: SoundID reference profile support
- Signal processing: Cubemix mode via DCT software
- Audio input connectors: analogue XLR
- Digital connection: digital AES/EBU input and thru
- Rear-panel acoustic controls: rear-panel EQ adjustments
- Power supply: AC power input 100–120 VAC or 220–240 VAC (switch set at factory)
- Power consumption: 3 W (idle) / 650 W (maximum)
- Weight (net): 21.8 lbs each (9.9 kg)
- Shipping weight: 28.2 lbs each (12.8 kg)
- Dimensions (product): 8.11 x 12.13 x 12.13 inches (206 x 308 x 308 mm)
- Dimensions (shipping): 17.24 x 13.19 x 17.83 inches (438 x 335 x 453 mm)
Specifications
Product features
- Sustainable product
- Not specified
- Active or passive
- Active
- Tweeter diameter
- Not specified
- Mid driver diameter
- 4 inch
- Woofer diameter
- 2 x 6.5 inch
- Coaxial
- No
- Monitor set configuration
- Single speaker
- Maximum frequency
- 20 - 20.9 kHz
- Minimum frequency
- 40 - 49 Hz
- RMS power in watts
- 350 - 499 W
- Speaker connections
- XLR input, digital input, digital output / thru
- Type of studio monitor
- 3-way (tweeter + midrange + woofer)
- Bass reflex system
- No bass reflex system
- Internal calibration
- No
Weight and dimensions including packaging
- Weight
- 11,5 kg
- Dimensions
- 42,0 x 33,0 x 30,0 cm
Product specifications
- Contents: 1x Fluid Audio Image 1 3-way studio monitor (white)
- Type: 3-way active monitor
- Max SPL: 108 dB
- Sensitivity: 87 dB @ 1 metre with -15 dBv input signal (level control set to 0 dB)
- Frequency response: ±4.6 dB 40 Hz – 20 kHz
- Frequency response: ±2.0 dB 80 Hz – 20 kHz
- Bass response: -3 dB @ 45 Hz
- Q: 0.707
- Slope: 24 dB/octave
- Crossover frequencies: 190 Hz / 3,000 Hz
- DSP: controlled by on-board DSP
- Enclosure: 14.5 litres total internal volume
- Enclosure: sealed woofer and midrange enclosures
- Tweeter: AMT (Air Motion Transformer)
- Tweeter dimensions: 66 x 66 x 27 mm
- Midrange: 4-inch aluminium cone
- Midrange: low-distortion motor with shorting ring
- Woofers: dual 6.5-inch paper cone woofers
- woofer excursion: +/-5.0 mm linear excursion
- amplifier power (treble): 75 W RMS
- Amplifier power (midrange): 100 W RMS
- Low-frequency amplifier power: 150 W x 2 RMS
- Total amplifier power: 475 W per monitor
- Controls: stepped input level attenuator
- Input impedance: 20 kΩ (balanced XLR)
- Signal processing: room correction file upload
- Signal processing: SoundID reference profile support
- Signal processing: Cubemix mode via DCT software
- Audio input connectors: analogue XLR
- Digital connection: digital AES/EBU input and thru
- Rear-panel acoustic controls: rear-panel EQ adjustments
- Power supply: AC power input 100–120 VAC or 220–240 VAC (switch set at factory)
- Power consumption: 3 W (idle) / 650 W (maximum)
- Weight (net): 21.8 lbs each (9.9 kg)
- Shipping weight: 28.2 lbs each (12.8 kg)
- Dimensions (product): 8.11 x 12.13 x 12.13 inches (206 x 308 x 308 mm)
- Dimensions (shipping): 17.24 x 13.19 x 17.83 inches (438 x 335 x 453 mm)
Product information
Product no: 9000-0156-7466
General
The Fluid Audio Image 1 is a compact 3-way active reference monitor designed for both professional near-field and mid-field applications. With on-board DSP, room correction file upload, SoundID Reference profile support and CubeMix mode (via DCT software), you can quickly tailor the monitor to your room and workflow. The sealed enclosure with dual-opposed low-frequency architecture (two 6.5-inch woofers) delivers tight, controlled bass, whilst the AMT tweeter and 4-inch midrange ensure detail and definition. Supplied individually.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
Alternative products by other brands
Search all products in category Studio Monitor-
Bargain Buy -20%Recommended price £2,183 £1,739In stock Order before 10:00pm = receive it on Thursday (free)
-
Bargain Buy -24%Recommended price £1,665 £1,266In stock Order before 10:00pm = receive it on Thursday (free)
-
Bargain Buy -39%Recommended price £365 £223In stock Order before 10:00pm = receive it on Thursday (free)
-
SALE ITEM -20%Recommended price £197 £158In stock Order before 10:00pm = receive it on Thursday (free)