Discontinued, this product can no longer be ordered.
Not sure if the M-Audio M3-8 active studio monitor 3-way (per piece) is for you? Do a Choice Check.
Start Choice Checker
M-Audio M3-8 active studio monitor 3-way (per piece)
Product no: 9000-0005-2889
Bax Music Warranty:
This product comes with a 3-year warranty.
General
The active M-Audio M3-8 is a great yet affordable 3-way studio monitor, which surpasses a mere starter model in various ways. The compact size of the speaker is reminiscent of a 2-way speaker, but houses three drivers - the tweeter and the Kevlar mid-frequency driver are mounted in-line. Thanks to the 220-watt tri-amp system, the three drivers are separately powered, which increases the overall sound quality.
The reliable M3-8 monitor
Connect the M 3-8 active monitor - with its gorgeous wooden front panel - to an audio interface or mixer by means of the balanced XLR or 6.3mm inputs, or use the unbalanced RCA inputs. A built-in 3-band equalizer and a switchable low-cut filter enable you to adjust the settings of the monitor, creating a neutral sound that matches the surrounding acoustics, and a volume control is located at the rear of the cabinet. In short, the M-Audio M3-8 is a reliable active studio monitor that supplies an excellent reference tone.
Tips or comments about this product
- Please note: supplied per single piece.
Specifications
Product features
| Speaker connections |
RCA input, 6.3 mm TRS input, XLR input |
| Active or passive |
active |
| Tweeter diameter |
5 inches |
| Maximum frequency |
22 - 22.9 kHz |
| Minimum frequency |
35 - 39 Hz |
| Monitor set configuration |
single speaker |
| RMS power in watts |
200 - 349 W |
Weight and dimensions including packaging
| Weight (incl. packaging) |
8,0 kg |
| Dimensions (incl. packaging) |
56,0 x 41,0 x 38,0 cm
|
Product specifications
- 3-way active studio monitor
- per piece
- front: wood veneer
- housing: vinyl-clad
- optimised internal bracing
- compact size
- 8-inch woven Kevlar woofer
- 5-inch woven Kevlar mid-frequency driver
- 1-inch silk-dome tweeter with integrated waveguide
- amplifier: tri-amp class A/B, 220 W
- inputs: balanced XLR and 6.3mm, unbalanced RCA
- 3-band equalizer with bypass
- switchable low-cut filter
- volume and power controls on rear panel
- frequency response: 40 Hz - 20 kHz
- crossover frequency: 450 Hz (low-mid), 3.9 kHz (mid-high)
- power: 150 W (low), 35 W (mid), 35 W (high)
- LF cutoff switch: flat/60 Hz/80 Hz
- 3-band equalizer: +/-6 dB @ 100 Hz, 1 kHz and 10 kHz, bypass switch
- protection: output current limiting, over-temperature, transient on/off (counters 'pops'), subsonic filter, external mains fuse
- dimensions: 268 x 434 x 285 mm
- weight: 12.8 kg