Discontinued, this product can no longer be ordered.
Not sure if the Moog Werkstatt 01 & CV Expander Analogue Synthesizer is for you? Do a Choice Check.
Start Choice Checker
Moog Werkstatt 01 & CV Expander Analogue Synthesizer
Product no: 9000-0071-0759
Bax Music Warranty:
This product comes with a 3-year warranty.
General
The Moog Werkstatt 01 & CV Expander is a solder-free, analogue synthesizer DIY kit. Originally designed as a case study for MoogFest, the Werkstatt 01 turned out to be a brilliant little synth and makes for a great introduction into the world of modular synthesizers. The Werkstatt 01 comes with a 13-button mini-keyboard so you can start cooking up melodies and bass lines right away and, thanks to the included CV Expander, even those already wise to the ways of synthesizers can integrate this plucky unit into their existing set-up.
Specifications
Product features
| 19-inch rack size |
not applicable |
| Number of keys |
13 |
| Arpeggiator/sequencer |
none |
| Control |
none |
| Synthesizer inputs |
none |
| Sound source |
analogue |
| MIDI & other |
CV/gate in, CV/gate out |
| Synthesizer outputs |
line out jack |
| Type of keys |
not applicable |
| Synthesizer type |
desktop module |
Weight and dimensions including packaging
| Weight (incl. packaging) |
1,6 kg |
| Dimensions (incl. packaging) |
27,0 x 20,5 x 17,5 cm
|
Product specifications
- Moog Werkstatt 01 & CV Expander
- analogue synthesizer kit
- solder-free assembly
- OSCILLATOR section:
- single VCO with frequency control (8 Hz - 16 kHz)
- sawtooth and square waveforms (with pulse width control)
- envelope or LFO selectable Mod Source (assignable to pulse width modulation or pitch)
- FILTER section
- classic 4-pole Moog Ladder Filter (with resonance control, 20 Hz - 20 kHz)
- polarity switch (+/-) and variable Filter Cutoff Modulation
- LFO section
- choice of Square or Triangle waveshape with rate control (2 Hz - 600 Hz)
- VCA/AMP section
- choice between Envelope Generator or ON (Drone)
- ENVELOPES section
- adjustable Attack & Decay time with Sustain On/Off switch
- KEYBOARD (KB) section
- 1 octave low-note priority legato keyboard with glide control
- PATCHBAY
- VCA input: 0V to +5V in VCA EG mode, +2.5V in VCA ON mode
- VCF input: -5V to +5V
- VCO LINEAR FM input: +/-2.5V (inverting control input)
- VCO EXPONENTIAL FM input: -5V to +5V, 1V/octave trimmable
- LFO CV input: 5V to +5V (negative CV slows LFO more than the panel)
- VCF AUDIO input: unbuffered/unmixed AC coupled input to VCF
- 2x KB CV output: 3V/semitone from 1 keyboard (attenuate for 1V/octave)
- 2x TRIG output: 5 msec pulse, 0 to +5V signal generated from low-note priority
- 2x GATE output: 0 to +5V signal generated from low-note priority
- 2x EG output: 0 to +5V signal, simple ASD or AD type envelope generator
- 2x LFO output: -2.5V to +2.5V triangle or square, selectable via LFO switch
- 2x VCF output: -2V to +2V signal for audio or CV use
- 2x VCO output: 0V to +5V VCO signal, waveform selected by VCO wave switch
- REAR PANEL
- AUDIO output: nominal +/-1.5V signal
- power supply: +12VDC centre-positive with 1.2A wall transformer (included, resembles the Minitaur power supply)
- power consumption: 1.8 watts AVG