Duratruss Trusses

Duratruss DT 31 1.0m

The Duratruss DT31/2 1-point truss tube can be secured via the included conical connector and pair of bolts and splints. This quick-coupling system ensures a secure connection and smooth assembly as well as disassembly.

Duratruss DT 22-23-24 steel pin

This steel pin is used for coupling two truss elements via a conical coupler. Insert a pin on both sides of the coupler to ensure that the truss elements won't come loose. We recommend that you use clips to fasten the pins to ensure that all parts of your connection are safe.

Duratruss DT 34/3 HD 50 cm Extra Strong Square Truss, 50cm

Duratruss DT 34 3 050 square truss extra strong with 50 x 3 mm main tubes and 20 x 2 mm diagonals. Length is 50 cm.

Duratruss 1721100016 DT 31/2-200 cm black

Duratruss DT 31/2 X-Piece

The C41-X from Duratruss is an X-shaped coupling piece for binding truss pipes and is made from high-quality aluminium with 2mm thick walls.

Duratruss DT23 C25-L90 2-way corner 90° apex in

This lightweight DT23 decorative truss, ideal for showrooms, pubs and restaurants, has all the charm of an actual truss. Its main tubes are just the right thickness, and easily distinguishable from the braces.

Duratruss DT 31/2-T35 T-Piece, 90°

The Duratruss DT 31/2-T35 is an endlessly useful T-shaped coupling component for adding a 90° support to a truss. The T-piece is made from high-quality aluminium with 2mm thick walls.

Duratruss DT 32/2-C20V-L60 black 2-Way 60° Corner 60° (Vertical)

With this corner section from DURATRUSS, you attach two straight truss ladders vertically at a 60-degree angle, for building stands, stages, drive-in shows, etc.

Duratruss DT23 T36H truss T-piece horizontal

Connect three Duratruss DT23 truss elements together easily with the DT23 T36H T-piece that can be used in apex up, and horizontal apex down as well as vertically.

Duratruss DT 34 2.5 metres

The Duratruss DT 34 has main tubes of 50mm diameter and cross tubes of 20mm. The wall thickness is 2mm. This DT 34 truss has a length of 2.5 metres.

Duratruss DT34 C21-L90 90-degree corner 0.5 m

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This part consists of two tubes of 50 cm that have a 90-degree angle.

Duratruss DT 34 C41-X X-section

The Duratruss DT 34 has main tubes with a diameter of 50 mm and bracing with a 20mm diameter - each tube has a wall thickness of 2 millimetres. This DT 34 X-section allows for the connection of four other truss parts.