▾

Tascam MZ-123BT 3-Channel Zone Mixer with Bluetooth

no reviews yet write a review

Recommended price £503 -17%

£419 incl. 20% VAT

General

The slimline, 1U high Tascam MZ-123BT 3-channel zone mixer comes supported by Bluetooth and is fully prepped for professional commercial installations in shops, restaurants, hotels, cafe, pubs, and anywhere else that might need its audio routing and broadcasting services. The Tascam MZ-123BT has a thankfully intuitive layout including two XLR/TRS, Euroblock microphone inputs with phantom power and a priority function that automatically reduces the volume of any music playing, so that the announcement you're making can be heard clearly. Since Bluetooth is also supported and amplified by a fitted Bluetooth antenna, you're getting stable wireless connection so that media can be reliably streamed from any applicable devices.

Specifications

Product features

Sustainable product	not specified
Number of zones	3x stereo
Split zones	no
Number of microphone channels	2
Number of link channels	3
Gain control on inputs	yes
Volume control	knobs
Equalizer	3-band
Panning per channel	no
Built-in effects	no
Audio ducking	no
Headphone output	yes
Input	jack (6.3 mm) + XLR, jack (6.3 mm) + XLR + RCA, Euroblock, RCA, RCA + XLR, XLR
Output connector	Euroblock
Crossfader	no
Fader start support	no
Input level meters	peak LED
Level meters on the outputs	peak LED
Type of display	none
Remote control	no
Built-in audio interface	no
Rack height	1 U

Weight and dimensions including packaging

Weight (incl. packaging)	4,0 kg
Dimensions (incl. packaging)	50,0 x 30,0 x 10,0 cm

Product specifications

Tascam MZ-123BT Multi-Zone mixer
analogue audio inputs:
- microphone connections: 1-2 (balanced)
  - front panel connectors:
    - XLR/TRS combi socket
    - XLR-3-31 (1: GND, 2: HOT, 3: COLD)
    - TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
  - rear connectors:
    - 2 × Euroblock
  - input impedance: 2.4 kOhms
  - nominal input level:
    - –26 dBu (front connector set to HIGH or rear connector PAD OFF)
    - –2 dBu (front connector set to low or rear connector PAD ON)
  - max. input level:
    - –10 dBu (front connector set to HIGH or rear connector PAD OFF)
    - +14 dBu (front connector set to low or rear connector PAD ON)
  - min. input level:
    - –65 dBu (front connector set to HIGH or rear connector PAD OFF)
    - –41 dBu (front connector set to LOW or rear connector PAD ON)
- line inputs (unbalanced): RCA pin jacks
  - nominal input level: -10 dBV
  - max. input level: +6 dBV
  - input impedance: >10 kOhms
- aux inputs (unbalanced): stereo mini-jack
  - nominal input level: –20 dBV
  - max. input level: +4 dBV
  - input impedance: 10 kOhms
analogue audio outputs:
- outputs 1–3 (balanced): 3 × Euroblock
  - nominal ouput level: +4 dBu (volume knob set to 0 dB)
  - maximum output level: +24 dBu
  - output impedance: 200 Ohms
- headphone output: stereo jack
  - maximum ouput capacity: 80 mW + 80 mW (THD+N ≤0.1 %, 32 Ohm load)
audio performance:
- equivalent input noise (EIN) ≤–125 dB(A)
  - (mic input to line output, 150 Ohms, 20-kHz LPF)
- frequency response:
  - microphone input to line input
    - 20 Hz – 20 kHz, +0.5 dB / –1 dB
    - (GAIN at min., VOLUME at 0 dB, JEITA)
  - line input to line output
    - 20 Hz - 20 kHz (+/- 0.5 dB)
    - (GAIN at min., VOLUME at 0 dB, JEITA)
- distortion:
  - microphone input (front) to line output: ≤0.02 %
  - microphone input (rear) to line output: ≤0.01 %
  - line input to line output: ≤0.01 %
- S/N ratio: >90 dB
- crosstalk attenuation: ≥80 dB
Bluetooth:
- version 4.2
- output class: Class 2
- supported profile: A2DP
- supported A2DP codecs: SBC, AAC, aptX™
- A2DP content protection: SCMS-T
- antenna: RP-SMA (female)
recommended operation temperature: 0–40 °C
power supply and physical specifications:
- power supply: AC 100 - 240V, 50/60 Hz
- power consumption: 25 W
- dimensions (L x W x H): 48.3 × 27.5 x 4.7 cm
- weight: 3 kg
included:
- power cable
- 8 Euroblock plugs with cable-tie pack
- rack mount screw pack
- user manual
- Bluetooth antenna