Devine Onyx 12A vocal installation

Service promise

Devine Onyx 12A 12" Active Full-Range Speaker, 1200W This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Innox IVA03 Speaker Stands with Bag (Set of 2) This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Devine Onyx CVR-12 Speaker Cover for Onyx 12(A) This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Devine DMX50/3 3-pin XLR DMX Cable, 3m This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Devine MixDesk 1202FX-MP 12-Channel Mixer with FX and Media Player This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Devine DM15 Dynamic Vocal Microphone This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty.

This product comes with a manufacturing defects warranty.

Innox IVA02 Light Microphone Stand (Black) This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Specifications

2x Devine Onyx 12A 12" Active Full-Range Speaker, 1200W

Devine's Onyx 12A is an affordable, bi-amped full-range loudspeaker with a complete set of connections! The 1200 Watt unit is equipped with XLR, jack, RCA and mini-jack inputs.

Product features

Sustainable product: Not specified
RMS power in watts: 200 - 349 W
Maximum SPL: 130 dB - 139 dB
Mid driver/woofer diameter: 12 inches
Tweeter diameter: 1.35 inches
Bluetooth: No
Playback options: None
Analogue audio output type: Balanced mix out (XLR)
Analogue audio input type: Unbalanced line in (RCA), unbalanced stereo line in (TRS mini-jack), balanced line in (TRS jack), balanced line in (XLR), microphone input (XLR)
Number of stereo AUX inputs: 1
Total microphone inputs: 2
Total guitar/bass inputs: None
Total line inputs: 2
Passive speaker output: No
Minimum frequency: 50 - 59 Hz
Maximum frequency: 19 - 19.9 kHz
DSP: No DSP
Built-in equaliser: Yes
Suitable as monitor: Yes
Speaker cabinet material: Plastic
Mounting points: 35mm stand flange
Weight per speaker: 15 kg

Weight and dimensions including packaging

Weight: 16,1 kg
Dimensions: 67,5 x 43,0 x 43,0 cm

Product specifications

Devine Onyx 12A full-range speaker
bi-amped
frequency response: 53Hz - 19kHz
amplifiers: Class-D + Class-AB
sensitivity: 95dB
max. SPL: 134dB
drivers:
- HF compression driver:
  - diameter: 1.35" (1" throat exit)
  - sensitivity: 105dB
  - dispersion angle: 90 x 60°
  - crossover frequency: 2.8kHz (24dB per octave)
- LF woofer:
  - diameter: 12" (2.5" voice coil)
  - crossover: 2.8kHz
power capacity:
- RMS: 300W
- peak: 1200W
connectors:
- 2x XLR input
- 1x TRS jack input
- 1x RCA input
- 1x mini-jack AUX input
- 1x XLR master output
housing material: polypropylene
grille: 1.3mm steel
rigging points: 4x M8
distance rod mount: standard 35mm
dimensions: 413 x 677 x 410mm
weight: 14.7kg

1x Innox IVA03 Speaker Stands with Bag (Set of 2)

This solid set of two speaker stands come complete with a bag, and since the stands have been TUV approved, they can take a maximum load of 25kg each.

Product features

Sustainable product: Not specified
Set: Yes
Mininum stand height: 110 to 120 cm
Maximum height of stand: 180 to 190 cm
Stand weight capacity: 25 kg
Colour: Black
Wind-up mechanism: No
Number of stands: 2
Type of base: Tripod
Shock absorption system: No
Stand material: Metal
Included stand accessories: Bag
Weight per stand: 2 to 4 kg
Stand mount: 35mm flange

Weight and dimensions including packaging

Weight: 7,5 kg
Dimensions: 100,5 x 21,5 x 12,5 cm

Product specifications

set consists of 2 stands and 1 practical carry bag
maximum load: 25kg each
tube diameter: 35mm
height: 1.2 - 1.8m
dimensions (folded): 97cm
weight: 4.4kg
material: metal
finish: satin black powder coating

2x Devine Onyx CVR-12 Speaker Cover for Onyx 12(A)

If you need a durable protective cover for your Onyx 12 or 12A speaker, the Devine CVR-12 cover is very literally made to meet your needs and comes with integrated handle cut-outs.

Product features

Sustainable product: Not specified
Speaker protection type: 12 inch speaker (specific brand/type)
Method of transport: Not applicable
Suitable for during use: No
Protection type: Cover

Weight and dimensions including packaging

Weight: 400 gr
Dimensions: 31,0 x 28,5 x 6,5 cm

Product specifications

Devine CVR-12
speaker cover for Onyx 12 en 12A
cut outs for handle access

2x Devine DMX50/3 3-pin XLR DMX Cable, 3m

Devine DMX50 Series cables are built to complete solid DMX lighting set-ups. This strong yet flexible 3 metre long problem-solver comes finished with highly reliable 3-pin XLR plugs and has a 110 Ohm resistance.

Product features

Sustainable product: Not specified
Length: 3.00 m
Data plug type: XLR 3-pin

Weight and dimensions including packaging

Weight: 196 gr
Dimensions: 20,0 x 18,0 x 3,0 cm

Product specifications

Devine DMX cable
connectors: 3-pin male XLR - 3-pin female XLR
impedance: 110 Ohms
length: 3m
colour: black
compatible with: DMX lighting controllers
isolation diameter: 1.6mm
isolation colours: red and white
number of conductors: 2
shielding: 100%
shielding material: aluminium foil
shielding dimensions: BC 16 x 4 x 0.12mm
inner conductor section: 0.23mm²
inner conductor: BC 20 x 0.12mm
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature:
- for fixed installations: -40°C to +80°C
- mobile installation: - 25°C / + 70°C

1x Devine MixDesk 1202FX-MP 12-Channel Mixer with FX and Media Player

The Devine MixDesk 1202FX-MP is an extensive, professional mixer fitted with an internal FX processor and USB/SD/Bluetooth media player. In addition, the MixDesk offers eight mono channels and two stereo channels.

Product features

Sustainable product: Not specified
Number of mono channels: 8
Number of stereo channels: 2
Number of submasters: None
Type of mixer inputs: Microphone input (XLR), balanced line input (TRS jack), unbalanced line input (RCA)
Type of mixer outputs: Balanced line output (XLR), balanced line output (TRS jack)
Headphone output: Yes
Inputs: Yes
Number of auxiliaries: 1 - 2
Built-in audio player: USB, SD(HC)
Built-in audio interface: No
Number of microphone inputs: 5 - 8
19 inches: 19-inch rack mount (included)
Phantom power: Yes
Volume control: Knobs, faders, faders + knobs
Built-in mixer effects: Reverb/delay/modulation
Type of mixer: Studio / PA mixer
Built-in effects: Yes

Weight and dimensions including packaging

Weight: 5,7 kg
Dimensions: 44,0 x 40,5 x 14,0 cm

Product specifications

Devine MixDesk 1202FX-MP
8 mono channel:
- microphone input: 3-pin XLR, balanced
- mono line input: balanced TRS jack / unbalanced TS jack
- gain control (trim)
- 3-band EQ
- AUX send control with on/off switch
- FX intensity control
- pan control
- PFL function
- peak LED
- channel volume control
2x stereo channels:
- RCA stereo input
- mono line input: balanced TRS jack / unbalanced TS jack
- 2-band EQ
- AUX send control with on/off switch
- FX intensity control
- pan control
- PFL function
- peak LED indicator
- channel volume control
internal FX module:
- Small hall
- Large hall
- Small room
- Bright room
- Thin plate
- Plate
- Spring reverb
- Arena
- Analogue Delay
- Chorus + Delay
- Stereo Chorus
- Flanger
- Phaser
- Phaser 2
- Flanger Delay
- Vocal Echo
built-in media player: USB, SD, Bluetooth, stereo channel 9/10
dimensions: 36.3 x 35.0 x 9.8 cm
weight: 4.3 kg
box contents:
- Devine MixDesk mixer
- power adapter
- rack mount + hardware

1x Devine DM15 Dynamic Vocal Microphone

An affordable all-rounder, the Devine DM15 dynamic vocal microphone features the clear sound of a cardioid polar pattern, setting it up for the stage or home studio. Clip included.

Product features

Sustainable product: Not specified
Minimum frequency: 50 - 59 Hz
Maximum frequency: 16 - 16.9 kHz
Polar pattern: Super cardioid
Maximum SPL: Not specified
Microphone sensitivity (dBV/PA): -54
Microphone impedance: 500-549 ohms
Audio connector: 3-pin XLR
On/Off Switch: No
Microphone weight: Not specified
Microphone set: No
Microphone accessories: Microphone clip

Weight and dimensions including packaging

Weight: 385 gr
Dimensions: 20,0 x 10,0 x 7,0 cm

Product specifications

Devine DM15
dynamic vocal microphone
polar pattern: super cardioid
frequency response: 50Hz - 16kHz
impedance: 500 Ohms
sensitivity: -54 dBV/PA
connector: 3-pin XLR
included:
- microphone clip
- pouch

1x Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled: No
Sustainable product: Not specified
Right angled or straight: Straight - straight
Colour: Black
Length: 10.00 m
Set: No
Audio connector: 3-pin XLR
Type of vlogging accessory: Cable

Weight and dimensions including packaging

Weight: 498 gr
Dimensions: 24,0 x 24,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Innox IVA02 Light Microphone Stand (Black)

This affordable, no-nonsense microphone stand offers a stable and fully adjustable bass for your microphone and comes fitted with a convenient boom arm, keeping the stand out the way of guitarists and bassists on stage, in the studio, or in the rehearsal room.

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: 2 - 3 kg
Boom arm: Yes
Height adjustable: Yes
Colour: Black
Stand material: Steel
Maximum height of stand: 220 to 230 cm
Included stand accessories: Microphone clip
Mininum stand height: Not specified
Screw thread size: 5/8 inch
Set: No
Construction: 2-part telescopic
Type of stand: Boom stand
Type of stand base: Flat base feet
Type of vlogging accessory: Microphone stand / clip

Weight and dimensions including packaging

Weight: 2,1 kg
Dimensions: 88,0 x 11,5 x 10,5 cm

Product specifications

microphone stand with solid base
three stand legs provide a wide, solid base
maximum height: 220cm
freely adjustable height
freely adjustable boom arm length
solid tightening knobs
collapsible for easy, compact storage
screw thread: ⅝"
cable clips included
microphone clip included

Videos

5 / 5

Devine MixDesk 1202FX-MP 12-Channel Mixer with FX and Media Player

Superb mixer, speedy and prompt delivery thanks so much.

January 20, 2026 | Jon

5 / 5

Innox IVA03 Speaker Stands with Bag (Set of 2)

Great bit of kit. 5/5

January 21, 2025 | Kevin Bull

5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music

July 17, 2024 | Gad

5 / 5

Innox IVA03 Speaker Stands with Bag (Set of 2)

Built for purpose, the build is not thick just wide so be prepared for them to take up a fair bit of space if it's just for a bedroom setup, a disco setup they will suit fine, I have mounted speakers that only weigh around 4kg each so cannot comment on weight load but the 35mm sits nice and tight.

March 3, 2023 | Liam M.

2 / 5

Innox IVA02 Light Microphone Stand (Black)

After 1 week the plastic hinge had completely snapped. Expected that part to be made of metal like the rest of the stand, but it wasn't. Luckily, I don't need to move the stand very often, but I'd recommend getting a mic stand with more durable components.

February 2, 2021 | Joel Page

4 / 5

Innox IVA02 Light Microphone Stand (Black)

The mic stand itself is a really good stand. Very sturdy. Just what I wanted. Only problem I have is the attachment, it doesn't fit my studio mic so I'm having to improvise. Other than that, very happy customer

May 13, 2020 | Richard Tozer

5 / 5

Devine MIC100/10 XLR Microphone/Signal Cable, 10m

The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.

April 23, 2020 | Ash

4 / 5

Innox IVA02 Light Microphone Stand (Black)

Great budget stand, though Im a bit concerned about how long the plastic boom junction will last...if Id had known I would have spent that bit more on a slightly better stand. Would be worth being in the description. Other than that, they seem good. Ive had drum over heads on them and there hasnt been any movement.

April 5, 2020 | JPUK

4 / 5

Innox IVA02 Light Microphone Stand (Black)

Great budget stands. Everything secures well and they are pretty sturdy. I found the plastic catch thing useless for cables since vibrations will go right through to the cable. One important note - when setup the centre pole is not perfectly vertical.

July 13, 2019 | R S.