100% wireless, the AirTurn BT500S-4 four-button footswitch has a universal design so it can be fully programmed for a custom setup. This switch bank is compatible with hundreds of apps and can create countless keyboard, audio and MIDI commands.
Polished off in solid seventies style, the Marshall PEDL-10034 external footswitch is the perfect partner for the clean channel and built-in tremolo of the Marshall 1974X amplifier.
Hook the Marshall PEDL-90003 1-Button Footswitch up to a compatible Marshall guitar amplifier and toggle between two channels, hands-free.
The Marshall PEDL-91016 6-way footswitch is compatible with any JVM amplifiers, is fully programmable, and boasts patented Stompware technology.
The Marshall PEDL-00041 is a black footswitch for Vintage Moderns Series guitar amps. You get access to two latched switches, giving you control over dynamic range and reverb.
Compact and ultra-robust, the Marshall PEDL-10011 one-button footswitch has been exclusively designed for switching between the channels of the Marshall DSL1H or DSL1C amplifier.
The Ampeg AFS2 Footswitch has a latching, two-button design and can be set up in combination with an SVT head, Rocket Bass® or BA combo equipped with footswitchable functions.
Couple the Strymon MiniSwitch up with an array of Strymon stompboxes to gain hands-free control over functions like tap tempo, boost, or preset selection.
The Blackstar FS-8 foot pedal offers easy control of your Blackstar Debut 50R amp with switches for channel change and reverb on/off, equipped with LED indicators.
Boss's FS-7 is a compact multifunctional dual foot switch that enables you to control effect pedals or to switch between the various channels of an amplifier.
The Blackstar FS-12 footswitch is compatible with the ID:CORE 100 and ID:CORE 150 guitar amplifiers and offers eased control over modulation and delays effects as well as the built-in looper, effects loop and noise gate.
The comprehensive Boss GA-FC foot controller simply gives you full, hands-free control over the functions of various Boss and Roland guitar amps.
The Markbass Markworld Dual Footswitch is compatible with various Markbass combos, heads and preamps, including the Big Bang, Little Marcus, Little Mark Vintage and Little Mark VI.
With this wireless footswitch, you effortlessly control your Neural DSP Nano Cortex wherever you are.
The Darkglass MIDI Footswitch makes it easy to control your Darkglass bass guitar amplifier and is compatible with the Darkglass Suite.
The RC-3 foot switch is suitable for various Tascam products, such as the GB-10 and the LR-10, and allows you to trigger specific functions of those devices. The foot switch can be connected by means of a 3-pin 2.5mm jack plug connector.
The Line 6 FBV2 is a compact 2-button foot switch that allows you to scroll through the first four presets of several Line 6 amps and PODs. With a cable.
Use the Electro Harmonix 8 Step Program foot controller with the EHX 8 Step Program sequencer. It expands the number of presets from 10 to 100 and allows you to browse your presets with two foot switches.
This solid footswitch is specially designed to allow practical use of the EHX Dual Stereo Looper. Connect the Electro Harmonix FC 22500 using a stereo 6.35 mm jack and step on both switches.
This is the Peavey 6505 Plus footswitch. This is a 3-button switch with included 7-pin DIN cable, intended for the Peavey 6505 Plus Head to switch the 2 channels, crunch and effects with your foot.
The Suhr microMIDI Control functions as a compact MIDI footswitch replacement, handing you MIDI control over your amplifiers and pedals. Features like an isolation switch set this widget up for any rig.
The endlessly universal AirTurn BT500S-6 six-button footswitch is compatible with countless apps and can be customised from the ground up to control effects, audio, and even lighting.
This Fender 2-button foot switch channel + effect is suited for the Fender FM65DSP and Super Champ XD and X2 guitar amplifiers. It is fitted with a 6.3mm jack connector.
Hook the Source Audio Tap Tempo Switch up to your One Series pedal and gain more control over effect parameters or presets.
The Marshall PEDL90008 comes fitted with four programmable footswitches and is compatible with Marshall's MG FX Series guitar amplifiers.
The Koch FS2-SN is a 2-button footswitch intended for use with the Koch Supernova amplifier tops.
The Source Audio SoleMan isn't just any hardware-and-software-based MIDI controller. It's extremely versatile and features two MIDI outputs for direct control over two bits of compatible MIDI kit.
This Fender 1-button on/off footswitch has a TS jack for connecting to modern Fender amplifiers and is compatible with the FM series, Mustang series and Blues Junior guitar amplifiers.
With the Fender 2-Button Footswitch Channel Reverb, you can change channels as well as switch your reverb on or off on your Fender amp, all without having to stop playing.
The FS2-ST footswitch is specially designed for Studiotone amps. With its two switches, you can alternate between overdrive and clean and it is possible to give the distorted channel a little extra.
To get the ultimate out of your Peavey guitar amp, you need the Peavey 3-button switch. Suitable for JSX Head, JSX 212 Combo, 3120 Head, Triple XXX, Triple XXX212 COMBO and the Triple XXX II.
The AirTurn BT500S-2 sets up musicians and performers with a two-button page-turner and controller that, via the compatible Manager app, can be custom-configured to trigger MIDI and keyboard commands.
Are you in the lucky possession of a Lava Music guitar with the HILAVA system? Then this Lava Music Wireless Effects Pedal is a handy option to get extra control over all the built-in effects.
This two-button, vintage-style Fender footswitch is equipped with RCA ports, making it compatible with older guitar amps equipped with matching inputs.
The Fender 2-Button Vintage-Style Vibrato-Fat Footswitch can be hooked up to toggle the vibrato circuit and FAT boost function of any Fender Vibro King amplifier.
Compatible with various Fender guitar amplifiers, this 1-Button Footswitch makes switching between channels as easy as can be.
Compatible with several Fender amps, the Fender 2-Button Footswitch Channel Chorus has two buttons: one to switch channels and one to control the Chorus effect.
The Fender 3-Button Footswitch Channel Gain Reverb has three knobs and works with Fender Roc Pro 1000, Performer 1000, Concert and Super amps.
The Markbass MB EVO1 Controller is a handy multi-foot switch that allows you to control your Markbass EVO1 amplifier head.
This Mackie ShowBox Footswitch allows you to control the effects and looper of your Mackie ShowBox Live. Connection is done with a 6.3 mm jack cable (not included).
The VOX VFS5 foot switch enables you to really make the most of your VOX Valvetronix or Valvetronix+ guitar amplifier. The VFS5 has a rugged metal design with traditional mechanical foot switches.
The Fortin Amplification Hydra is a MIDI controller with eight footswitches in the smallest possible housing. Ideal if you are looking for a compact setup. Features bright blue LED indication.
The Darkglass Intelligent Footswitch is a compact device designed for use with the Darkglass Microtubes amplifier to toggle between the clean and overdrive channels. It also features an (un)mute function.
The Fishman Footswitch for Loudbox amps is a dual footswitch that allows you to remotely mute channels and FX.
Fender's 2-Button Footswitch Channel Gain/More Gain is suitable for the Hot Rod Deluxe™, Hot Rod DeVille™, Deluxe 90, Stage 160™, Stage 100™, Stage 100 Head, FM 212R and FM 100 Head. A cable is also included.
The Radial JR-5 allows foot control of the Radial JX44 / JX44 V2 or JX42 / JX42 V2.
Fender 2-knob vintage-style foot switch vibrato/reverb for modern Fender guitar amplifiers with ¼-inch jack foot switch input like the ‘65 Twin Reverb and '65 Deluxe Reverb.
The Koch FS6-SN is the 6-button footswitch for the Koch Supernova amplifier tops.
