DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

Specifications

Product features

Sustainable product: Not specified
RMS power (4 ohms) per channel: 300 - 349 watts
RMS power (at 8 Ohms) per channel: 200 - 249 Watts
2-ohm compatible: Yes
Amplifier class: D
Number of amplifier channels: 2
19-inch rack size: 1U
Amplifier output: Locking speaker connector, 6.3mm jack
Input: Jack (6.3 mm) + XLR
Equipped with crossover: No
Built-in DSP processor: No
Cooling: Ventilator
Bridge mode: Yes
Built-in protection: Overload, thermal, short circuit, clip indicator
Audio loop output: Yes
Built-in filter: None

Weight and dimensions including packaging

Weight: 5,1 kg
Dimensions: 55,0 x 38,0 x 11,0 cm

Product specifications

two-channel digital amplifier
power output
- stereo 2 Ohm: 2 x 450 Watt RMS
- stereo 4 Ohm: 2 x 300 Watt RMS
- stereo 8 Ohm: 2 x 200 Watt RMS
- bridge 2 Ohm: not applicable
- bridge 4 Ohm: 1x 400 Watt RMS
- bridge 8 Ohm: 1x 300 Watt RMS
frequency range: 20 Hz – 20 KHz, +0/-1 dB
THD: < 0.1%
signal to noise ratio> 96 dB A-weighted
crosstalk: >70 dB
damping factor: >180
amplification 30 V
input sensitivity: 0.9 - 1.1 V (+/-1 dBv)
impedance: 20 kOhm balanced, 10 kOhm unbalanced
output modes: stereo/bridge
amplification: Class D
power supply: SMPS
Protection
- clip limiter (fixed)
- short circuiting
- protection from overheating
- overloading
- dc-tuning
- soft start
cooling: forced air via radial fan
ventilation: front to back
inputs:
- 3-pin XLR
- TRS/jack
outputs:
- SpeakOn
- TRS/jack
power port: IEC
input voltage: 210~240V AC, 50/60 Hz
power consumption: 750 W
dimensions: 484 x 281 x 44 mm
mounting depth: 278 mm (excl. connections)
weight: 4.2 kg
colour: black
1.5m power cable included

Service promise

Bax Music Warranty This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Reviews (3)

4.7

3 reviews

Rating

5 stars 2 4 stars 1 3 stars 0 2 stars 0 1 star 0

Write a review

5 / 5

DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

This is my first DAP product and so far I'm impressed. First impressions are decent build quality and easy operation. I'm using the amp in bridged mode to drive a 4 ohm sub in a home cinema environment. This is also my first class D amp, I had doubts about power delivery but they were unfounded. The sound is a big improvement over the old mosfet class AB that's been replaced. The CA-2300 seems to have good control and produces a tight sound, it has removed the boomy, muddy sound I used to get when the old amp was driving the speaker moderately hard.

Time will tell with reliability but so far I can only recommend this amp.

June 16, 2020 | Chris A.

Reviews from other countries

5 / 5

DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

Ik was op zoek naar een klasse D versterker die in bridge-mode bij 4 Ohm, 400 Watt kan leveren.
Deze versterker voldoet daar aan. De klank is goed. Fijn is ook de soft start, dwz de versterker geeft geen harde plop bij het aanzetten. Ook de 2 Ohm mogelijkheid is een pré.
Veel vermogen bij een laag gewicht voor een redelijke prijs.

November 3, 2023 | Ton

This review was automatically translated from Dutch.

4 / 5

DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

Ampli leger pas trop bruyant . Le son est net sans bavure qui convient pour driver des petites enceintes 2 vois pas trop gourmande en watts . Je recommande pour cela . Petit hic au niveau des molettes de gain pas trop pratique a tourner quand on a de gros doights . A part ça DAP a fait du bon travail

October 2, 2020 | Nicolas B.

This review was automatically translated from French.