DAP CA-4150 Class-D 4-Channel Amplifier with Crossover

DAP CA-4150 Class-D 4-Channel Amplifier with Crossover
Product no: 9000-0055-9963 Bax Music Warranty: This product comes with a 3-year warranty.

General

Up to four passive speakers can be hooked up to the DAP CA-4150 amplifier and, in bridge mode, two speakers can be connected to raise the power per side. The CA-4150 digital power amp comes in a slim, compact housing, weighs just 4.8kg and slots neatly into a 1U 19-inch rack. Besides the built-in crossover, this Class-D amp comes with short-circuit, overload and overheating protection supported by a PROT LED warning light.

Tips or comments about this product

Please note: This product includes one amplifier only. Any other amplifiers or productse seen in the images serve illustrative purposes only and are not included.

Specifications

Product features

Sustainable product	not specified
RMS power (4 ohms) per channel	150 - 199 watts
RMS power (at 8 Ohms) per channel	50 - 99 Watts
2-ohm compatible	yes
Amplifier class	D
Number of amplifier channels	4
19-inch rack size	1U
Amplifier output	Euroblock
Input	Euroblock
Equipped with crossover	yes, variable
Built-in DSP processor	no
Cooling	ventilator
Bridge mode	yes
Built-in protection	overload, thermal, short circuit, clip indicator
Audio loop output	yes
Built-in filter	HPF, LPF

Weight and dimensions including packaging

Weight (incl. packaging)	6,0 kg
Dimensions (incl. packaging)	55,0 x 38,0 x 11,0 cm

Product specifications

digital four-channel amplifier with crossover
power output:
- stereo 2 Ohm: 4 x 230 Watt RMS
- stereo 4 Ohm: 4 x 150 Watt RMS
- stereo 8 Ohm: 4 x 90 Watt RMS
- bridge 2 Ohm: not applicable
- bridge 4 Ohm: 2x x 275 Watt RMS
- bridge 8 Ohm: 2x 190 Watt RMS
frequency range: 20 Hz – 20 KHz, +0/-1 dB
THD: < 0.1%
signal to noise ratio> 96 dB A-weighted
crosstalk: >70 dB
damping factor: >180
amplification 28 V
input sensitivity: 0.9 - 1.1 V (+/-1 dBv)
impedance: 20 kOhm balanced, 10 kOhm unbalanced
output modes: stereo/bridge
amplification: Class D
power supply: SMPS
protection:
- clip limiter (fixed)
- short circuiting
- protection from overheating
- overloading
- dc-tuning
- soft start
cooling: forced air via radial fan
ventilation: front to back
inputs: Euroblock (included)
outputs: Euroblock (included)
power port: IEC
input voltage: 210~240V AC, 50/60 Hz
power consumption: 800 W
dimensions: 484 x 281 x 44 mm
mounting depth: 278 mm (excl. connections)
weight: 4.8 kg
colour: black
1.5m power cable included