DAP Qi-4200 installation amplifier, 4 channels, 4x 200 W

built-in DSP processor	no
cooling	ventilator
bridge mode	yes
built-in protection	thermal, short circuit, square wave / DC voltage
audio loop output	no
built-in filter	not specified
Complete	~
Original packaging	~
Condition of product	~

built-in DSP processor	no
cooling	ventilator
bridge mode	yes
built-in protection	thermal, short circuit, square wave / DC voltage
audio loop output	no
built-in filter	not specified
Complete	~
Original packaging	~
Condition of product	~

Ordered before 10pm: Delivered in 2 Working Days (if in stock)
Free delivery from £50

DAP Qi-4200 installation amplifier, 4 channels, 4x 200 W
Product no: 9000-0034-0411 Bax Music Warranty: This product comes with a 3-year warranty.

General

DAP Audio's Qi-4200 is a 4-channel amplifier with a total of 800 Watts of power. Each channel can be sent to a different location and bridge mode can be set for each stereo pair. It's equipped with SMPS and has a Class-D amplifier that is lightweight and highly efficient in terms of energy use and output. The Qi-4200 has built-in short circuit, DC, RF and soft start protection. There are 4 XLR inputs and 4 SpeakOn outputs on board and all of this comes in a housing that measures just 1U.

Specifications

Product features

Sustainable product	not specified
RMS power (4 ohms) per channel	150 - 199 watts
RMS power (at 8 Ohms) per channel	100 - 149 Watts
2-ohm compatible	no
Amplifier class	D
Number of amplifier channels	4
19-inch rack size	1U
Amplifier output	locking speaker connector
Input	XLR
Equipped with crossover	no
Built-in DSP processor	no
Cooling	ventilator
Bridge mode	yes
Built-in protection	thermal, short circuit, square wave / DC voltage
Audio loop output	no
Built-in filter	not specified

Weight and dimensions including packaging

Weight (incl. packaging)	8,0 kg
Dimensions (incl. packaging)	60,0 x 51,0 x 8,0 cm

Product specifications

power output:
- stereo 4 Ohms: 4x 200 W
- stereo 8 Ohms: 4x 120 W
- bridge 8 Ohms: 2x 400 W
parameters:
- S/N ratio: > 90 dB
- input sensitivity: 0.65 V
- impedance: 20 kOhms (balanced), 10 kOhms (unbalanced)
- technology: Class D
- short circuit, DC, RF, soft start protection
- cooling: temperature-controlled fan
- power supply: SMPS
connectors:
- inputs: 4x XLR
- outputs: 4x SpeakOn
- power supply: IEC
electrical:
- input voltage: 100~240V AC, 50/60 Hz
- power consumption: 500 W
physical:
- dimensions: 388 x 435 x 44 mm
- installation depth: 370 mm (excl. connectors)
- weight: 5.8 kg

Write a review

Reviews from other countries

Translate all reviews into English View original reviews

Clemens den Brinker June 4, 2024

Wrote the following about DAP Qi-4200 installation amplifier, 4 channels, 4x 200 W

prima versterker. Ik heb deze gekozen omdat deze 4 kanalen heeft en ideaal is voor studio gebruik om het stereo signaal ''clean'' en met effecten te beluisteren (en verschillen direct te kunnen vergelijken. Compact en licht en genoeg vermogen om goede luidsprekers aan te sturen. Geen 5 sterren door ventilator koeling ipv convectie