(B-Stock) DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Oh

B-stock information

Warranty:	This product comes with a 3-year warranty.
Complete	Yes
Original packaging	Damaged
Condition of product	Traces of use (no damage/scratches)
What is a B-Stock Item? Any item we can no longer sell as new is labelled B-stock. This can be for a number of reasons, including damaged or missing packaging, or because the item shows light signs of use. In any case, you can expect the item to work just fine. Always Read the B-Stock Info Every B-stock product page includes relevant information about the item. Be sure to read it in full! Under the Product Information tab, you will find the original product description and specifications, which may refer to accessories that are not included with the B-stock item. This can be a cable, a remote control, software or any other accessory. B-Stock Product Photos B-stock photos can give you a good idea of the condition of the item, its packaging and (missing) contents. Here, what you see is what you get. The photos usually include: A photo of the original item A photo of the B-stock item plus included packaging and accessories (if applicable) A photo of the front of the B-stock item A photo of the back of the B-stock item Photos of any damage (if applicable) Original Packaging Status Packaging in good condition: undamaged, at most some tape residue Packaging damaged: box has dents, tears and/or holes Packaging missing: has been replaced with a Bax Music box. Item Condition Status: New: the product itself is like new, but the packaging may no longer look like new Traces of use (no damage/scratches): smudges, fingerprints and/or dust Scratches/damage: product has scratches and obvious damage Can I Return a B-Stock Item? Yes, our 30-day money-back guarantee also applies to B-stock items. Do I Get a Warranty on B-Stock Items? Yes, the standard warranty period usually applies to B-stock items as well.

(B-Stock) DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms
Product no: 5000-0026-8651 Bax Music Warranty: This product comes with a 3-year warranty.

General

The DAP CA-2300 is a class-D, two-channel amplifier that's able to output 2x 200 Watts of power at 8 Ohms. In bridge mode, however, this compact unit is able to deliver even more power, and you're also free to hook up speakers with a 4 Ohm or 2 Ohm impedance. To keep it and your gear safe, the CA-2300 is equipped with various built-in protection circuits, including ones to safeguard the device against thermal overload, power overload and short circuiting. In addition, it features a clip limiter and soft-start technology and measures only 1U in height, meaning it won't take up much space in a 19" rack.

Tips or comments about this product

Please note: This product includes one amplifier only. The other amplifiers shown in the images serve illustrative purposes only and are not included.

Specifications

Product features

19-inch rack size	1U
2-ohm compatible	yes
Number of amplifier channels	2
Audio loop output	yes
Bridge mode	yes
Complete	Yes
Sustainable product	not specified
Input	jack (6.3 mm) + XLR
Built-in filter	none
Built-in protection	overload, thermal, short circuit, clip indicator
Built-in DSP processor	no
Cooling	ventilator
Original packaging	Damaged
RMS power (4 ohms) per channel	300 - 349 watts
RMS power (at 8 Ohms) per channel	200 - 249 Watts
Condition of product	Traces of use (no damage/scratches)
Amplifier class	D
Amplifier output	locking speaker connector, 6.3mm jack
Equipped with crossover	no

Weight and dimensions including packaging

Weight (incl. packaging)	5,1 kg
Dimensions (incl. packaging)	55,0 x 38,0 x 11,0 cm

Product specifications

two-channel digital amplifier
power output
- stereo 2 Ohm: 2 x 450 Watt RMS
- stereo 4 Ohm: 2 x 300 Watt RMS
- stereo 8 Ohm: 2 x 200 Watt RMS
- bridge 2 Ohm: not applicable
- bridge 4 Ohm: 1x 400 Watt RMS
- bridge 8 Ohm: 1x 300 Watt RMS
frequency range: 20 Hz – 20 KHz, +0/-1 dB
THD: < 0.1%
signal to noise ratio> 96 dB A-weighted
crosstalk: >70 dB
damping factor: >180
amplification 30 V
input sensitivity: 0.9 - 1.1 V (+/-1 dBv)
impedance: 20 kOhm balanced, 10 kOhm unbalanced
output modes: stereo/bridge
amplification: Class D
power supply: SMPS
Protection
- clip limiter (fixed)
- short circuiting
- protection from overheating
- overloading
- dc-tuning
- soft start
cooling: forced air via radial fan
ventilation: front to back
inputs:
- 3-pin XLR
- TRS/jack
outputs:
- SpeakOn
- TRS/jack
power port: IEC
input voltage: 210~240V AC, 50/60 Hz
power consumption: 750 W
dimensions: 484 x 281 x 44 mm
mounting depth: 278 mm (excl. connections)
weight: 4.2 kg
colour: black
1.5m power cable included

Write a review

Chris A. June 16, 2020

Wrote the following about DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

This is my first DAP product and so far I'm impressed. First impressions are decent build quality and easy operation. I'm using the amp in bridged mode to drive a 4 ohm sub in a home cinema environment. This is also my first class D amp, I had doubts about power delivery but they were unfounded. The sound is a big improvement over the old mosfet class AB that's been replaced. The CA-2300 seems to have good control and produces a tight sound, it has removed the boomy, muddy sound I used to get when the old amp was driving the speaker moderately hard.

Time will tell with reliability but so far I can only recommend this amp.

Reviews from other countries

Translate all reviews into English View original reviews

Ton November 3, 2023

Wrote the following about DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

Ik was op zoek naar een klasse D versterker die in bridge-mode bij 4 Ohm, 400 Watt kan leveren.
Deze versterker voldoet daar aan. De klank is goed. Fijn is ook de soft start, dwz de versterker geeft geen harde plop bij het aanzetten. Ook de 2 Ohm mogelijkheid is een pré.
Veel vermogen bij een laag gewicht voor een redelijke prijs.

Nicolas B. October 2, 2020

Wrote the following about DAP CA-2300 Class-D Amplifier, 2x 200 Watt at 8 Ohms

Ampli leger pas trop bruyant . Le son est net sans bavure qui convient pour driver des petites enceintes 2 vois pas trop gourmande en watts . Je recommande pour cela . Petit hic au niveau des molettes de gain pas trop pratique a tourner quand on a de gros doights . A part ça DAP a fait du bon travail