Audio Technica AT-ART9XA Dual MC Cartridge

Audio Technica AT-ART9XA Dual MC Cartridge
Product no: 9000-0099-0147 Bax Music Warranty: This product comes with a 3-year warranty, the styluses come with a manufacturing defects warranty.

General

The Audio Technica AT-ART9XA is a variant of the AT-ART9X. Equipped with a hybrid elliptical Shibata stylus, this dual moving-coil cartridge ensures improved contact with the grooves for an enhanced HF response and reduced vinyl wear. The naked diamond needle has one-piece design which improves the overall quality of the sound but, due to the high sensitivity of the stylus, it's worth noting noise and distortion may increase when using worn records. The special magnetic circuit has an output voltage of 0.2mV, ensuring maximum expression end retained dynamics. Audio Technica include the tools required to install the AT-ART9XA.

Tips or comments about this product

Please note: Since it's a moving coil cartridge (MMC), the Audio Technica AT-ART9XA is compatible with turntables that support MMC cartridges only.

Specifications

Product features

Sustainable product	not specified
Colour	gold / bronze / brass / copper, black
Set	no
Type of stylus	other
Type of turntable component	cartridge

Weight and dimensions including packaging

Weight (incl. packaging)	400 gr
Dimensions (incl. packaging)	10,5 x 9,0 x 5,0 cm

Product specifications

frequency response: 20 Hz - 50 kHz
channel separation: 30 dB (1 kHz)
vertical tracking force: 1.6 - 2.0 g (1.8 g standard)
recommended load impedance: min. 100 Ohm (with head amplifier connected)
coil impedance: 12 Ohm
DC resistance: 12 Ohm/
coil induction: 25 µH (1 kHz)
output voltage: 0.2 (mV @ 1 kHz, 3.54 cm/sec)
output channel balance: 0.5 dB @ 1 kHz)
stylus: Shibata
cantilever: 0.28mm solid boron
static compliance: 25 x 10-6 cm/dyne
dynamic compliance: 15 x 10-6 cm/dyne (100 Hz)
mounting: half-inch
mounting holes: 2x M2.6
weight: 8.5g
included accessories:
- non-magnetic screwdriver,
- 2x sealing rings
- screws (M2.6), (5.0mm × 2; 8.0mm × 2; 10.0mm x 2; 12.0mm x 2)
- protector
- brush