Tascam Sonicview 16 Interactive Digital Mixer

Tascam Sonicview 16 Interactive Digital Mixer
Product no: 9000-0105-6575 Bax Music Warranty: This product comes with a 3-year warranty.

General

The Tascam Sonicview 16 digital mixing console is a professional solution for remote recording, permanent studio set-ups and broadcasting. Easy to integrate into any existing studio or control room, the Sonicview 16 features a built-in Dante interface, a multi-channel USB interface, and more than enough inputs and outputs. Freely assign functions to the controls, the motorised faders, the two VIEW (Visual Interactive Ergonomic Workflow) touch-screens and the control software to streamline your studio workflow and make it smoother than ever before.

The Sonicview Series

There are two Tascam Sonicview mixers available: the Sonicview 16 and the Sonicview 24. Both are based on the same architecture and set you up with 44 input channels (40 mono/2 stereo), 22 flex output busses, an L/R main bus, and an internal SD/USB stereo audio recorder. The only difference between both mixers has to do with the number of analogue inputs that feature class 1 HDIA microphone preamps (16 vs 24). These preamps are the best mic preamps that Tascam have made to date and boast excellent equivalent input noise (EIN) along with a first-class signal-to-noise ratio, THD, and frequency response.

Top-Class Audio

The 54-bit floating point FPGA mixing engine that powers the Sonicview not only supports flexible level tweaking without sacrificing the audio resolution or extremely low latency, but combines with 32-bit/96 kHz sampling and 32-bit analogue-to-digital converters for the highest possible audio quality as well as excellent tracking, mixing and playback performance. Dante network integration and in-line monitoring systems are fully supported and, since this high-end mixer even features a 32-in/32-out USB interface, it can be used for recording as well as live broadcasting.

Tips or comments about this product

Please note: The tablet seen in the images serves illustrative purposes only and is not included.

Specifications

Product features

Sustainable product	not specified
Number of channels	33-64
Number of analogue input channels	17 - 24
Number of analogue output channels	17 - 24
Network connections	DANTE
Digital audio inputs	none
Digital audio outputs	none
Number of microphone inputs	13 - 16
Digital snake	yes, available separately
Input	jack (6.3 mm), RCA, XLR
Output connector	XLR (3-pin)
Inputs	2 channels
Equalizer	4-band parametric
Dynamics	compressor, expander, gate
Input level meters	via built-in display, via iPad / iPhone / iPod, via PC/Mac
Type of display	touch screen, colour
Volume control	knobs, faders, faders + knobs, motorised faders, via PC / Mac, via iPad / iPhone / iPod, via touchscreen
Expansion possibilities	AES/EBU expansion card, DANTE expansion card, MADI expansion card, expansion card for analogue I/O
Built-in audio interface	USB (multi track)
Built-in audio player	USB, SD(HC)
Remote control	via iPad, via Ethernet
19 inches	19-inch rack mount (not included)
Connector position	back
Mixer power	power cable
Built-in effects	yes

Weight and dimensions including packaging

Weight (incl. packaging)	17,5 kg
Dimensions (incl. packaging)	70,2 x 59,5 x 35,5 cm

Product specifications

TASCAM VIEW (Visual Interactive Ergonomic Workflow) interface supports intuitive control via three different view modes
2x 7" colour touchscreens
44x input channels (40x mono, 2x stereo)
22x flexible output buses plus main L/R bus with 31-band graphic EQ
54-bit float-point FPGA mixing engine, 96 kHz sampling rate
ultra-low latency: 2x samples (20.8 μs) in mixing engine, 0.51 ms analogue-to-analogue
Tascam HDIA (High-Definition Instrumentation Architecture) class 1 microphone preamps
integrated Dante interface (64x inputs/outputs); supports redundancy, AES67, DDM and SMPTE 2110
32-bit/96 kHz USB audio interface (32x in/out)
16x mic/line inputs (up to +32 dBu), 16x XLR line outputs with flexible routing
4x multi-FX processors
Tascam Sonicview Control software for Windows, macOS and iPadOS enables remote control and off-line editing
2x Tascam expansion slots
- optional 32-track SDXC recorder, MADI, AES/EBU and analogue I/O cards available for the second slot (none included)
dimensions: 55.44 x 47.2 x 22.81cm
weight: 13 kg