Discontinued, this product can no longer be ordered.
Not sure if the Devine DM 10 vocalset XL microphones (x3) + speakers (x2) + mixer is for you? Do a Choice Check.
Start Choice Checker
Devine DM 10 vocalset XL microphones (x3) + speakers (x2) + mixer
Product no: 9000-0045-4491
Bax Music Warranty:
Devine DM 10 kit Dynamic Microphones (Set of 3) This product comes with a 3-year warranty.
Innox IVA 12 Microphone Stand (Black) This product comes with a manufacturing defects warranty.
Devine Artis 12A 300W Active Speaker This product comes with a 3-year warranty.
Devine MX-6 PA and Studio Mixer This product comes with a 3-year warranty.
Devine MIC100/5 XLR Microphone/Signal Cable, 5m This product comes with a manufacturing defects warranty.
Devine VA1013 Male XLR to Stereo Jack Plug Cable, 3m This product comes with a manufacturing defects warranty.
General
This XL vocal set has everything you need to amplify vocals. It comes with two Devine Artis 12a active speakers, the MX-6A PA and studio mixer, three DM 10 dynamic microphones, three mic stands and all the cables you need.
Specifications
1x Devine DM 10 kit Dynamic Microphones (Set of 3)
Only Devine could offer three rugged, practical dynamic microphones, including microphone clips and a case, for such an amazingly low price. This DM 10 kit can be used for a variety of vocal applications.
Product features
| On/Off Switch |
No |
| Sustainable product |
not specified |
| Microphone sensitivity (dBV/PA) |
-54 |
| Microphone weight |
not specified |
| Microphone impedance |
500-549 ohms |
| Maximum SPL |
not specified |
| Maximum frequency |
16 - 16.9 kHz |
| Microphone accessories |
microphone clip, case |
| Microphone set |
yes |
| Minimum frequency |
80 - 99 Hz |
| Polar pattern |
cardioid |
| Audio connector |
3-pin XLR |
| Karaoke accessory type |
microphone |
Weight and dimensions including packaging
| Weight (incl. packaging) |
1,4 kg |
| Dimensions (incl. packaging) |
33,0 x 27,0 x 10,5 cm
|
Product specifications
- Dynamic microphone
- Set of 3
- Suited for singing and speech applications
- Pickup pattern: cardioid
- Insensitive to feedback
- Low-noise design
- Frequency response: 80Hz - 16kHz
- Sensitivity: -54dB
- Output impedance: 500 Ohms
- Metal housing and grille
- Connector: XLR
- Colour: black
- Included: case, 3x CL 10 microphone clip
3x Innox IVA 12 Microphone Stand (Black)
The Innox IVA 12 is a solid, pro-grade microphone stand equipped with a large, ergonomic tightening knob that allows you to adjust the height of the stand while the three legs have been finished with rubber feet, keeping the whole thing nice and stable.
Product features
| Number of stands |
1 |
| Sustainable product |
not specified |
| Microphone stand weight |
2 - 3 kg |
| Boom arm |
yes |
| Height adjustable |
yes |
| Colour |
black |
| Stand material |
steel |
| Maximum height of stand |
200 to 210 cm |
| Included stand accessories |
none |
| Mininum stand height |
not specified |
| Screw thread size |
5/8 inch |
| Set |
no |
| Construction |
2-part telescopic |
| Type of stand |
boom stand |
| Type of stand base |
flat base feet |
| Type of vlogging accessory |
microphone stand / clip |
Weight and dimensions including packaging
| Weight (incl. packaging) |
2,4 kg |
| Dimensions (incl. packaging) |
86,5 x 11,0 x 8,0 cm
|
Product specifications
- professional microphone stand
- equipped with three stand legs with rubber feet
- freely adjustable height
- screw thread: 5/8-inch
- freely adjustable boom arm length
- vertical telescopic tube, ideal for overhead microphone setups
- large, ergonomic tightening knobs
- practical, collapsible construction
- equipped with a practical cable management system
- length when folded: 860mm
- required floor surface when unfolded: 600mm
- maximum height in overhead position: 2m
2x Devine Artis 12A 300W Active Speaker
As the perfect all-round active speaker, the Devine Artis 12A comes with a built-in amplifier module and offers countless functions and features, including a USB/SD mp3 player, a clip limiter and a variety of inputs.
Product features
| Number of stereo AUX inputs |
none |
| Playback options |
USB drive, SD card |
| Bluetooth |
no |
| Mid driver/woofer diameter |
12 inches |
| Tweeter diameter |
1 inch |
| DSP |
no DSP |
| Sustainable product |
not specified |
| Suitable as monitor |
yes |
| Weight per speaker |
18 kg |
| Total guitar/bass inputs |
none |
| Total line inputs |
2 |
| Total microphone inputs |
2 |
| Built-in equaliser |
yes |
| Speaker cabinet material |
plastic |
| Maximum SPL |
not specified |
| Maximum frequency |
18 - 18.9 kHz |
| Minimum frequency |
50 - 59 Hz |
| Mounting points |
35mm stand flange |
| RMS power in watts |
200 - 349 W |
| Analogue audio input type |
unbalanced line in (RCA), balanced line in (XLR), microphone input (XLR), microphone input (TS jack) |
| Analogue audio output type |
balanced mix out (TRS jack), balanced mix out (XLR), speaker output (TS jack) |
| Passive speaker output |
yes |
Weight and dimensions including packaging
| Weight (incl. packaging) |
16,5 kg |
| Dimensions (incl. packaging) |
36,0 x 34,0 x 6,0 cm
|
Product specifications
- powerful 12-inch active speaker
- built-in amplifier module
- power amplifier: 300W RMS (750W peak)
- impedance amplifier module: 4 Ohms
- output for passive speaker via 6.35mm jack
- minimum impedance passive speaker: 8 Ohms
- built-in clip limiter and Power indicator
- woofer: 12-inches
- tweeter: PH-04 with 1.34-inch exit
- built-in USB MP3 player
- connector microphone input: XLR or 6.35mm jack
- volume control and on/off switch for USB MP3 player
- volume control for microphone input
- connector line input: RCA (stereo) and XLR
- connector line output: 6.35mm jack and XLR
- volume control for line input
- two-way equalizer: bass and treble
- master volume control
- handle on the side
- 35mm stand flange with locking screw
- power cable included
- frequency range: 50 to 18,000 Hz (-10 dB)
- sensitivity: 96 dB (+/- 2 dB)
- housing: plastic
- dimensions: 420 x 585 x 310mm
- weight: 18 kg
1x Devine MX-6 PA and Studio Mixer
The Devine MX-6 is a great asset in both the studio and on stage. This compact mixer offers 4 mono channels and a stereo channel, EQ per channel, a built-in MP3 player and an FX send.
Product features
| 19 inches |
no |
| Number of auxiliaries |
1 - 2 |
| Number of microphone inputs |
3 - 4 |
| Number of mono channels |
4 |
| Number of stereo channels |
1 |
| Number of submasters |
none |
| Phantom power |
yes |
| Headphone output |
yes |
| Built-in audio interface |
no |
| Built-in audio player |
USB |
| Built-in effects |
yes |
| Built-in mixer effects |
reverb/delay/modulation, channel EQ |
| Inputs |
yes, only mono channels |
| Type of mixer inputs |
microphone input (XLR), balanced line input (TRS jack), Hi-Z input (TS jack) |
| Type of mixer |
studio / PA mixer |
| Type of mixer outputs |
balanced line output (TRS jack), unbalanced line output (RCA), stereo headphone output (TRS jack or mini jack) |
| Volume control |
faders |
Weight and dimensions including packaging
| Weight (incl. packaging) |
3,0 kg |
| Dimensions (incl. packaging) |
40,0 x 29,0 x 10,0 cm
|
Product specifications
- Compact mixer
- Suited for live and studio applications
- 4 mono channels with insert, 1 stereo channel
- 48V phantom power (mono channels)
- LED VU meters with clip indicator
- Built-in MP3 player
- Echo effect (with level and duration control)
- Headphone output with volume control
- FX send enables you to connect external effects
- Equalizer: 3-band (high: 12 kHz, mid: 2.5kHz, low: 60Hz)
- Gain range: 12-60dB
- Frequency response: 10Hz - 60kHz
- Signal / noise ratio: -90dB (A-weighted)
- Total harmonic distortion (THD): 0.008%
- Power consumption: 15W
- Adapter included (230V, 2x 17V AC)
- Dimensions: 276 x 256 x 62mm
Connectors:
- 4x line input (XLR/6.35mm TRS jack/6.35mm insert)
- 1x stereo input (2x 6.35mm TS jack)
- Main out (2x 6.35mm TRS jack)
- Tape out (stereo RCA)
- Headphone output (6.35mm TRS jack)
- FX send (6.35mm TR jack)
3x Devine MIC100/5 XLR Microphone/Signal Cable, 5m
Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 5-metre model.
Product features
| (partially) coiled |
no |
| Sustainable product |
not specified |
| Right angled or straight |
straight - straight |
| Colour |
black |
| Length |
5.00 m |
| Podcast bundle |
no |
| Set |
no |
| Audio connector |
3-pin XLR |
| Accessory type |
cable |
| Type of vlogging accessory |
cable |
Weight and dimensions including packaging
| Weight (incl. packaging) |
288 gr |
| Dimensions (incl. packaging) |
24,0 x 20,0 x 4,0 cm
|
Product specifications
- XLR male - XLR female
- can be used as a microphone cable or as an all-round signal cable
- supple, rugged cable
- high-grade connectors with locking option
- connectors with pull relief to retain contact integrity
- length: 5m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226mm²
- conductor dimensions: 20 x 0.12mm
- helical sheathing: 0.12 x 64
- cable diameter: 6mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70°C
- capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m
Product features
| Sustainable product |
not specified |
| Jack plug type |
1 x jack 6.3 mm TRS male |
| XLR plug type |
1 x XLR 3p male |
| Length |
3.00 m |
| Right-angled connector |
no |
Weight and dimensions including packaging
| Weight (incl. packaging) |
180 gr |
| Dimensions (incl. packaging) |
21,0 x 17,0 x 2,5 cm
|
Product specifications
- plug 1: 3-pole XLR male
- plug 2: male stereo jack
- high signal quality
- length: 3m
- colour: black