Not sure if the iCON Ultra 4 ProDrive III Audio Interface is for you? Do a Choice Check.
Start Choice Checker
iCON Ultra 4 ProDrive III Audio Interface
Product no: 9000-0063-3855
Bax Music Warranty:
This product comes with a 3-year warranty.
General
The straight-forward design of the iCON Ultra 4 ProDrive III allows two instruments to be recorded at the same time. But don't let this simplicity fool you. This is a powerful audio interface, and even comes supported by ProDriver VST, so it can take care of your VSTs and give your computer a much needed break. In fact, this interfacer can even be used as a standalone unit.
The iCON Ultra 4 ProDrive III with ProDriver VST
The layout of this 24-Bit 96/192KHz, two in and two out audio interface is tight and clear. Lush preamps have been fitted on each channel, as well as phantom power, and high-grade converters. A MIDI keyboard can be plugged directly into the iCON Ultra 4 ProDrive III to control your selected VST instrument, or you can use a guitar modelling VST and play without even needing your DAW.
Specifications
Product features
19 inches
no
Number of analogue Inputs
4
Number of analogue outputs
2
Number of headphone outputs
1
Computer ports
USB 3.0 (USB A)
Sustainable product
not specified
Phantom power
yes
Suitable for operating system
Apple OSX / Mac OS, Microsoft Windows
Interface for
bands & producers
Total guitar/bass inputs
2
Total microphone inputs
2
Low latency monitoring
yes, DSP mixer
Maximum sample rate
192 kHz
Included data cable
USB cable
Included software
other
Network connections
none
Software included
yes, CD-ROM / DVD/ HDD
Analogue audio input type
balanced line in (TRS jack), microphone input (XLR), Hi-Z instrument input (TS jack)
Analogue audio output type
balanced line out (TRS jack), headphone output (jack or mini-jack)
Weight and dimensions including packaging
Weight (incl. packaging)
1,0 kg
Dimensions (incl. packaging)
23,0 x 19,0 x 9,5 cm
Product specifications
iCON Ultra 4 ProDrive III audio interface
24-Bit 96/192KHz 2-In/2-Out audio interface
line inputs 1/2(balanced):
frequency response: 22 Hz – 22 kHz (+/- 0.1 dB)
dynamic range: 117dB
signal-to-noise ratio >117 dB A-weighted
THD + N: -107 dB
Crosstalk: -107dB @ 1kHz
input level:
balanced: +4dBu
unbalanced: -10dBV
maximum input level:
balanced: +10.2dBu
unbalanced: +2.0dBV
impendance: 10K Ohm
gain: 50 dB
Mic/Inst Inputs 1/2 (balanced, minimal gain):
frequency response: 22 Hz – 22 kHz (+/- 0.1 dB)
dynamic range: 117dB
Signal-to-Noise Ratio: -117dB, A-weighted
THD + N: -107 dB
Crosstalk:-107dB @ 1kHz
maximum input level: +3.8 dBu
impendance:
Inst in: 500K Ohm
Mic in: 1.8K Ohm
gain: 50 dB
Line Outputs 1-2 (gebalanceerd):
frequcny response: 22Hz to 22kHz (+/-0.1dB)
dynamic range: 117dB, A-weighted
Signal-to-Noise Ratio:-117dB
THD+N:-107dB
Crosstalk:-107dB @ 1kHz
nominal output level: balanced: +4dBu
maximum output level: +10.2dBu
0utput impedance: 150 Ohms
headphones outputs: (op maximum volume, 100 Ohm load):
frequency response: 22 Hz – 22 kHz (+/- 1 dB)
power to Ohms: 90 mW to 100 Ohm
THD+N: <0.06% (-66dB)
Signal-to-Noise Ratio: -105dB, A-weighted
maximum output level to 100 Ohms: +2.0dBV, typical
output impedance: 75 Ohm
supports DirectSound, WDM and ASIO2.0
Compatible with Mac OS (Intel-Mac) and Windows 7, 8& 10 (32-bit/64-bit)