Based on more than 21,240 customer reviews

Neutrik NA2-IO-DLINE Dante Analogue Audio Interface

no reviews yet
Neutrik NA2-IO-DLINE Dante Analogue Audio Interface

Discontinued

This product can no longer be ordered

Specifications

Product features

19 inches
No
Number of analogue Inputs
2
Number of analogue outputs
2
Number of headphone outputs
0
Computer ports
Ethernet
Sustainable product
Not specified
Phantom power
No
Total guitar/bass inputs
None
Total microphone inputs
N/a
Low latency monitoring
Not specified
Maximum sample rate
96 kHz
Included data cable
None
Included software
None
Network connections
DANTE
Software included
Not specified
Analogue audio input type
Balanced line in (XLR)
Analogue audio output type
Balanced line out (XLR)

Weight and dimensions including packaging

Weight
512 gr
Dimensions
24,0 x 9,5 x 6,0 cm

Product specifications

  • Neutrik NA2-IO-DLINE Dante interface
  • channels:
    • 2 input (Line level)
    • 2 output (Line level)
  • supported sampling rates: 44.1 / 48 / 88.2 / 96 KHz
  • bit depth: 16, 24, 32 bit
  • Ethernet connection: 100 BASE-TX
  • power consumption: < 2 Watts
  • power supply: (power over Ethernet) switch or PoE midspan power injector
  • analogue audio input:
    • impedance: 6.6 kOhms
    • input level (balanced): 22 dBu max.
    • frequency response: 20 Hz - 20 kHz
    • dynamic range: >100 dB
    • signal to noise ratio: > 100 dB
    • THD + Noise: < 0.01% @ + 4 dBu, A-Weighting
    • crosstalk: <-80 dB @ 20 kHz
  • weight: 0.44 kg
  • dimensions including rubber sleeve: 164 x 82 x 51 mm
  • dimensions without rubber sleeve: 151 x 66 x 41 mm

Alternative items

Specifications

Product features

19 inches
No
Number of analogue Inputs
2
Number of analogue outputs
2
Number of headphone outputs
0
Computer ports
Ethernet
Sustainable product
Not specified
Phantom power
No
Total guitar/bass inputs
None
Total microphone inputs
N/a
Low latency monitoring
Not specified
Maximum sample rate
96 kHz
Included data cable
None
Included software
None
Network connections
DANTE
Software included
Not specified
Analogue audio input type
Balanced line in (XLR)
Analogue audio output type
Balanced line out (XLR)

Weight and dimensions including packaging

Weight
512 gr
Dimensions
24,0 x 9,5 x 6,0 cm

Product specifications

  • Neutrik NA2-IO-DLINE Dante interface
  • channels:
    • 2 input (Line level)
    • 2 output (Line level)
  • supported sampling rates: 44.1 / 48 / 88.2 / 96 KHz
  • bit depth: 16, 24, 32 bit
  • Ethernet connection: 100 BASE-TX
  • power consumption: < 2 Watts
  • power supply: (power over Ethernet) switch or PoE midspan power injector
  • analogue audio input:
    • impedance: 6.6 kOhms
    • input level (balanced): 22 dBu max.
    • frequency response: 20 Hz - 20 kHz
    • dynamic range: >100 dB
    • signal to noise ratio: > 100 dB
    • THD + Noise: < 0.01% @ + 4 dBu, A-Weighting
    • crosstalk: <-80 dB @ 20 kHz
  • weight: 0.44 kg
  • dimensions including rubber sleeve: 164 x 82 x 51 mm
  • dimensions without rubber sleeve: 151 x 66 x 41 mm

Product information

Product no: 9000-0047-5950

General

The robust Neutrik NA2-IO-DLINE Dante interface simply and effectively hooks audio equipment up to a Dante network. Use this magic little box to integrate up to two audio channels into a Dante network, or to convert a Dante signal into an analogue audio signal. As such, the NA2-IO-DLINE is able to feed and receive audio signals in a DANTETM network and, if you want to use it as part of a fixed installation, the rubber protective sleeve can simply be removed.

Bax Music Warranty This product comes with a manufacturing defects warranty.

Reviews

A review can no longer be written about this item
There are no reviews for this product yet.

Downloads

Other products from Neutrik

Find all products of the brand Neutrik

Alternative products by other brands

Search all products in category External Audio Interfaces
Compare your gear (1/10)