Protect the internal components of your speaker against dust and dirt with this handy speaker foam.
This foam is 10 mm thick and has an anthracite colour.
This Polybloc by Penn Elcom measures 120 x 200 cm and is 10 mm thick. It's perfect for using as the interior panelling on a flight case to keep the contents safe from bumps and shocks.
This Penn Elcom-made foam-plastic panel is made to line any self-build flight case. While it's not completely shock-resistant, this 5mm thick Polybloc can provide a neatly finished padded interior.
With this soft foam, you can rest assured that your gear will be transported safely from A to B. This anthracite-coloured foam is 50 mm thick.
Perfect for polishing off a self-build flight case, this sheet of Penn Elcom Polybloc is 60cm wide and 100cm long. Cut it to size for a custom fit, and set up your gear with optimum protection.
Perfect for polishing off a self-build flight case, this sheet of Penn Elcom Alveobloc is 15mm thick, 120cm wide and 200cm long. Cut it to size for a custom fit, and set up your gear with optimum protection.
This anthracite-coloured convoluted foam has a thickness of 20 mm.
This Penn Elcom Polybloc measures 120 x 200cm and is 20mm thick. It's perfect to use as interior panelling for a flight case to keep the contents safe from bumps and shocks.
This foam can be placed to lid of a flightcase. In this way, you can clamp your equipment tightly without it getting damaged. This foam is 50 mm thick.
This robust 30 mm foam block by Penn Elcom is perfect for protecting your equipment from damage inside a flight case. The block measures 120 x 200 cm but you can easily cut it to the size you need.
Perfect for polishing off a self-build flight case, this sheet of Penn Elcom Alveobloc is 80mm thick, 60cm wide and 100cm long. Cut it to size for a custom fit, and set up your gear with optimum protection.
Penn Elcom's Polybloc is a thick, shock-absorbing foam sheet that can be cut to size as needed to line flight case interiors with a protective layer. This dense slab is 18mm thick and measures 120cm x 200cm.
Pad out your flight case or rack with a protective layer of foam using this customisable sheet of Penn Elcom Polybloc foam.
Want to line the interior of your custom flight case with shock-absorbing foam? Simple! Grab this 15mm-thick Penn Elcom Polybloc sheet and get started.
Close to finishing a custom flight case build? Don't forget to pad it out with Penn Elcom's shock-absorbing Polybloc foam.
Designed for fully customising the interior of a flight case to protect more sensitive gear from shocks and knocks, this thick sheet of foam can be cut to size and comes with Penn Elcom's mark of quality.
This Polybloc by Penn Elcom measures 120 x 200 cm and is 20 mm thick. It's perfect for using as the interior panelling on a flight case to keep the contents safe from bumps and shocks.
This Penn Elcom-made foam-plastic panel is made to line any self-build flight case. While it's not completely shock-resistant, this 5mm thick Polybloc can provide a neatly finished interior.
Made by Penn Elcom, this 50cm thick panel of protective foam can be used to finish off any DIY flight case with shock absorbing padding.
Penn Elcom's 100mm-thick shock-absorbent foam Polybloc protects your valuable equipment from damage during transport.
This thick foam plastic is suitable for covering the interior of your flight case. This will protect your equipment from bumps and shocks, ensuring your equipment arrives at its destination unharmed.
Polish off the interior of any self-build flight case with the protective padding of 7cm-thick foam. This 60cm wide and 100cm long sheet can be cut to size, giving your expensive gear a custom fit.
Thick and shock-absorbant, this 100mm-thick sheet of Penn Elcom Polybloc foam can be used to customise a flight case and protect your valuable equipment from damage during transport.
Building your own flight case? Don't forget the interior lining of the case! With Penn Elcom Alveobloc, you are assured of optimum shock and impact absorption.
This neat in-case system provides an individual protective slot for twenty-five microphones. Made by Penn Elcom, this pre-cut foam insert is 155mm thick, 406mm wide and 365mm deep.
Thick foam plastic for optimal protection. Provide your flight case with Penn Elcom Polybloc and impacts and shocks will be absorbed. You can safely transport your heavy equipment from now on!
Building your own flight case? Don't forget the interior lining of the case! With Penn Elcom Alveobloc, you are guaranteed optimum shock and impact absorption.
This Polybloc by Penn Elcom measures 120 by 200 centimetres and is 10mm thick. It's perfect for lining the interior of a flight case and helps keep the contents safe from bumps and shocks.
This foam inlay can accommodate 7 microphones and has a build-in size of 430 by 320mm.
With this soft foam, you can rest assured that your gear will be transported from A to B, safely. This foam has a gauge of 20 mm and has an anthracite colour.
Are you building your own speaker? Use this high-quality 10mm speaker foam to protect inner components against dust and dirt!
Filters
Filters